Rega Brio MK7 Integrated AmplifierRega Brio MK7 Integrated Amplifier at Vinyl Sound Toronto Canada The Brio MK7 is a stereo integrated amplifier from Rega Research (Southend on Sea, England), available at Vinyl Sound in Toronto, Canada. Now in its seventh generation, the Brio MK7 is the most advanced and feature packed Brio that Rega Research has ever produced. A completely re laid circuit, a new onboard Wolfson DAC with two digital inputs, and higher specification MUSES operational

Rega Brio MK7 Integrated Amplifier at Vinyl Sound Toronto Canada

The Brio MK7 is a stereo integrated amplifier from Rega Research (Southend-on-Sea, England), available at Vinyl Sound in Toronto, Canada. Now in its seventh generation, the Brio MK7 is the most advanced and feature-packed Brio that Rega Research has ever produced. A completely re-laid circuit, a new onboard Wolfson DAC with two digital inputs, and higher-specification MUSES operational amplifiers combine with a 50W per channel output into 8 ohms and a built-in moving magnet phono stage inside a handmade custom half-width aluminium chassis. The Brio MK7 was named Sound Advice Best Amplifier of 2025 and earned acclaim from What Hi-Fi?, The Ear, and AVForums, confirming its position among the finest integrated amplifiers available at its price level.

A Completely Re-Laid Circuit

Rega's engineering team approached the Brio MK7 as a ground-up redesign of the circuit rather than a simple revision. The PCB layout has been fully upgraded to handle higher specifications across all critical parts. A second raw power supply has been implemented to provide further isolation between the output stage and the driver stage, line amplifiers, and phono amplifier. This improves the separation between high-level and low-level signal stages, reducing interference and lowering the noise floor. Higher-specification MUSES operational amplifiers are used throughout the line, DAC, and phono amplifier sections. The result is THD+Noise of typically 0.005% at 1kHz, a figure that reflects the precision of the circuit architecture. The Brio has long been described as one of the most musically rewarding amplifiers in its class, and the MK7 brings measurably lower distortion and improved isolation to that well-established foundation.

Onboard DAC with Digital Inputs

The Brio MK7 marks the first time a DAC has been integrated into a half-width Rega amplifier. Two digital inputs are provided: an S/PDIF coaxial connection (isolated, 0.5V, 75 ohm) and an S/PDIF optical Toslink connection. Both inputs support PCM at sampling rates of 32, 44.1, 48, 88.2, 96, 176.4, and 192kHz, making the Brio MK7 fully compatible with CD players, digital streamers, computers, and network audio devices. The decoding hardware is built around a Wolfson WM8742 DAC chip, following the approach taken in Rega's larger Elex and Elicit amplifiers. This addition means the Brio MK7 can serve as the complete analogue and digital hub for a modern hi-fi system without requiring a separate DAC component.

Moving Magnet Phono Stage

The Brio MK7 includes an integrated Rega-designed moving magnet phono stage, evolved from the circuit that has been refined across multiple Brio generations. The MK7 benefits from improved isolation between stages and higher-specification op-amps providing gain for attached cartridges. As Rega Research designs and manufactures its own turntables, tonearms, and cartridges in-house, the phono stage is engineered with a level of seriousness that goes well beyond a convenience feature. It is an excellent match for Rega's own Nd3, Nd5, and Nd7 moving magnet cartridges, as well as third-party MM cartridges from a wide range of manufacturers.

Headphone Output

A headphone socket on the front panel drives standard hi-fi headphones directly from an onboard headphone circuit. Rega designed this circuit specifically to minimise its impact on the main signal path, ensuring that connecting headphones does not compromise the overall sound quality of the amplifier. A dedicated switch deactivates the main speaker outputs when the headphone socket is in use.

Key Features

• Handmade in England: The Brio MK7 is hand-assembled by Rega Research in Southend-on-Sea, England, in the same facility that produces Rega's turntables, tonearms, and cartridges.
• 50W per Channel into 8 Ohms: Class AB amplifier delivering 50W into 8 ohms and 72W into 4 ohms, providing ample power for a wide range of loudspeakers including demanding 4-ohm loads.
• Onboard DAC with Two Digital Inputs: Wolfson WM8742-based DAC with S/PDIF coaxial and optical Toslink inputs supporting PCM up to 24-bit/192kHz, a first for the Brio line.
• Integrated Moving Magnet Phono Stage: Rega-designed MM phono stage with improved isolation and MUSES op-amps, optimised for use with Rega and third-party MM cartridges.
• Re-Laid Circuit with MUSES Op-Amps: Fully redesigned PCB layout with a second raw power supply for improved isolation between output and signal stages, THD+Noise of typically 0.005% at 1kHz.
• Headphone Socket: Front-panel headphone output with a dedicated onboard circuit that automatically mutes the speaker outputs and does not disrupt the main signal path.
• Custom Half-Width Aluminium Chassis: Compact form factor designed for flexible placement, including as part of a Rega mini system alongside the Neo MK2 PSU footprint.
• Auto Standby and Standby Function: Automatically enters standby after approximately one hour of no input signal. Can be turned off if preferred. Standby and power-on are controllable via the included mini system remote.
• Thermal Cut-Out: If the amplifier reaches a temperature liable to cause damage, the protection system disables the speaker output and, if the condition continues, powers the unit off automatically.
• Short Circuit Protection: Fold-back short circuit protection guards the output stage against excessive currents without placing any protection circuitry in the audio signal path.
• Three Line Inputs plus Phono: Three RCA line-level inputs plus the dedicated phono input provide connectivity for turntables, CD players, streamers, and other sources.
• Mini System Remote Included: New custom remote operates standby function and is designed for compatibility with future Rega products.

Technical Specifications

Connections at a Glance

• 3 x RCA line inputs (rear panel)
• 1 x Moving magnet phono input with ground terminal (rear panel)
• 1 x S/PDIF coaxial digital input, isolated, 0.5V, 75 ohm (rear panel)
• 1 x S/PDIF optical Toslink digital input (rear panel)
• 1 x Speaker output pair (rear panel)
• 1 x Headphone output (front panel)
• 1 x Mini DIN power input (via Rega PS1 wall supply)

Awards and Critical Recognition

• Sound Advice Best Amplifier of 2025 — Sound Advice (UK)
• Sound Advice Best of 2025 — Sound Advice (UK)
• The Ear Best of 2025 Award — The Ear (UK)
• Exceptional Badge — Sound Advice (UK, 2025)

Frequently Asked Questions

What is the Rega Brio MK7?

The Rega Brio MK7 is a handmade stereo integrated amplifier from Rega Research of Southend-on-Sea, England, and the seventh generation of one of the most long-running amplifier lines in British hi-fi. It delivers 50W per channel into 8 ohms and 72W per channel into 4 ohms, includes a built-in Wolfson DAC with two digital inputs, an integrated moving magnet phono stage, and a headphone output, all inside a compact custom half-width aluminium chassis. The MK7 was recognised as the Sound Advice Best Amplifier of 2025 and earned acclaim from What Hi-Fi?, The Ear, and AVForums upon its release in early 2025.

How does the Rega Brio MK7 compare to the Arcam A5 and Cambridge Audio CXA61?

The Brio MK7 competes directly with the Arcam A5 and Cambridge Audio CXA61 at a similar price point. The Brio MK7 distinguishes itself with a fully re-laid circuit, MUSES op-amps throughout, an onboard Wolfson DAC supporting up to 24-bit/192kHz, and three RCA line inputs plus phono — more analogue inputs than several rivals at this level. Where some competitors offer more digital inputs or streaming functionality, the Brio MK7 prioritises circuit quality, musical engagement, and the integration of Rega's decades of phono stage expertise. Independent reviewers at What Hi-Fi? found that initial doubts about its ability to compete at this price category proved unfounded.

Does the Rega Brio MK7 have a DAC built in?

Yes, the Brio MK7 is the first half-width Rega amplifier to include an onboard DAC. It features two digital inputs — one S/PDIF coaxial (isolated, 0.5V, 75 ohm) and one S/PDIF optical Toslink — both supporting PCM sampling rates from 32kHz up to 24-bit/192kHz. The DAC is built around a Wolfson WM8742 chip, the same approach used in Rega's larger Elex and Elicit models. This allows the Brio MK7 to connect directly to CD players, streamers, computers, and network audio devices without requiring a separate external DAC.

Can the Rega Brio MK7 be used with a turntable?

Yes, the Brio MK7 includes an integrated moving magnet phono stage with its own dedicated input, making it a natural pairing for turntables including the Rega Planar 1, Planar 2, Planar 3, and Planar 3 RS Edition. The phono stage has been redesigned for the MK7 with improved isolation between stages and higher-specification MUSES op-amps, and benefits from Rega's extensive experience designing cartridges and turntables in-house. A grounding terminal is also provided on the rear panel.

What is the power output of the Rega Brio MK7 and what speakers will it drive?

The Brio MK7 delivers 50W per channel into 8 ohms and 72W per channel into 4 ohms from its Class AB amplifier stage. This output is sufficient for the vast majority of bookshelf and floorstanding loudspeakers in home listening environments, including demanding 4-ohm designs. Short circuit protection is built in to safeguard the output stage, and it does not sit in the audio signal path, so it does not affect sound quality during normal operation.

Does the Rega Brio MK7 support streaming or Bluetooth?

The Brio MK7 does not include built-in streaming or Bluetooth functionality. It is designed as a high-performance wired amplifier, and streaming can be added by connecting a dedicated streamer such as a WiiM, Naim, or Rega network player to one of its digital or analogue inputs. This approach allows the Brio MK7 to work with any streaming platform or source device without locking users to a specific ecosystem.

Where can I buy the Rega Brio MK7 in Toronto or Canada?

The Rega Brio MK7 is available at Vinyl Sound, an authorised Rega Research dealer located in Toronto, Canada. Vinyl Sound serves customers across the Greater Toronto Area and Canada, offering expert guidance, in-store demonstrations, and full manufacturer support for the complete Rega amplifier and turntable range.

Does the Rega Brio MK7 have auto standby and remote control?

Yes, the Brio MK7 includes both auto standby and a mini system remote control. The auto standby function activates after approximately one hour of no input signal and can be disabled if preferred. The included remote operates the standby and power-on functions and is designed for compatibility with future Rega products in a coordinated mini system setup.