KYO-EI WIDE TREAD SPACER FOR LEXUS LS M14xP1.5 5827W1

KYO-EI

5827W1

Size: M14 × P1.5
_x000D_ HOLE: 5
_x000D_ PCD: 120
_x000D_ OD mm outer dia .: 165
_x000D_ hub diameter mm hub dia .: 60
_x000D_ thickness mm thickness: 27
_x000D_ Prise: ¥ 28,000 (excluding tax)
_x000D_ hub bolts of height: 26mm
_x000D_ JAN code: 4965581 806532

Lexus LS460 series, 600 series, LC500-based private
■ Lexus LS-only design. Integrated wide tread spacer with a hub.
■ adopt an outer diameter φ165mm forged billet material cutting the ultrahard aluminum material.
■ hub bolts are adopted using a chromium-molybdenum steel, hardened, high-strength, high durability of the bolt.
■ reduce blurring at high speeds in integrated with the hub.
■ Number of holes: 5H ■ PCD: 200 ■ Thickness: 22 · 27mm
■ outer diameter: 165mm ■ hub diameter: φ60mm
■ nut size: M14 × P1.5
● wide tread spacer / 2-sheet set
● Note on accessories / dedicated nut special adapter
mounted
※ the wide tread spacer is a dedicated "Lexus LS460 / LS600h / LC500 / LC500h". Do not
the other vehicle type attachment.
● If you have received a strong shock to the tire wheel, takes excessive force to the wide tread spacer, there is a possibility to cause damage and is used as it is, should be removed immediately because it may lead to an accident. In addition, the product should not be used in the absolute.
● by offset or the like of the spacer thickness and the wheel, it might not be mounted to the vehicle (in contact with the projection-tire house than fender). When you purchase, on the confirmation of the current car state, please purchase.
● Before mounting, be sure to rust the mounting surface and the vehicle body hub side of the back side of the wheel with a wire brush or the like, should be installed from drop the dirt.
● body of the hub bolts, spacer of the hub bolts, do not painted with oil or grease on the mounting nut. There is a possibility that the tightened bolt is damaged more than necessary. If you
● on the back side of the body of the hub side and the wheel there is a foreign matter and projections, do not install.
when fitted with a wide tread spacer to the body hub bolts ●, when the bolt is protruding from the spacer, do not install a wide tread spacer. If you
● on the back side of the mounting wheel of "escape" is, it is possible to attach the wide tread spacer. However, the is genuine stud bolt depth of "escape", if there is no depth to fully escape, do not install a wide tread spacer.
● The vehicle of steel wheels do not install absolutely.
● After mounting the wide tread spacer, it is recommended alignment adjustment to prevent uneven wear of the tire.
● attachment, for the failure and damage caused by errors of handling, does not guarantee at all. ● After attaching the wide tread spacer, it is recommended alignment adjustment to prevent uneven wear of the tire.
● attachment, for the failure and damage caused by errors of handling, does not guarantee at all. ● After attaching the wide tread spacer, it is recommended alignment adjustment to prevent uneven wear of the tire.
● attachment, for the failure and damage caused by errors of handling, does not guarantee at all.

Images are for illustration purpose only. Actual product may vary.