Calibrant

CalibrantApplicable Product Range Itemiser 4DX, Itemiser 4DN, Itemiser 5X Product Overview This calibrant tube is stored inside the instruments calibrant chamber located on the rear of the instrument (identified with a 'C'). The instrument uses the calibrant as part of the automatic internal calibration process and it is required for correct instrument operation. This item should be checked replaced by appropriately trained personnel in accordance with the

Applicable Product Range 

Itemiser 4DX, Itemiser 4DN, Itemiser 5X

Product Overview

This calibrant tube is stored inside the instruments calibrant chamber located on the rear of the instrument (identified with a 'C'). The instrument uses the calibrant as part of the automatic internal calibration process and it is required for correct instrument operation.

This item should be checked/replaced by appropriately trained personnel in accordance with the instructions provided in the instrument's user guide.

Rapiscan Systems recommends that you always maintain an adequate supply of consumables and routine/as-needed maintenance parts in order to ensure uninterrupted operation of your instrument.

Product Information

• Contains Methyl Salicylate (13 grams)
• Dimensions - 91.9 mm x 25.40 mm (L x Dia)

• Product life - approximately 5 years in the instruments chamber
• Assumes instrument location is room temperature (20-26^oC)
• Assumes operating storage temp of ~45^oC

• Shelf Life (calculated) - Indefinite
• Assumes plugs or tapes have not been removed
• Assumes stored at room temperature (20-26^oC)

• Ships in a sealed container (L 177.8 mm x Dia 44.45 mm) which also contains
• 1 packet of Silica Gel (moisture absorbtion)
• 1 packet of Activated Carbon (odor control)