Mini Drag Car Weight Tuning Set

Mini Drag Car Weight Tuning SetMini Drag Car Weight Tuning Set: The weight tuning set allows you to adjust or add weight with 1 mm thick brass plates and a 1mm front Plate for your electronics if you decide you do not need the brass up front. Aluminum Front E Plate: 6. 4 grams Brass Front E Plate: 21. 8 grams Brass Full Battery Plate: 24. 2 grams Brass Pocket Battery Plate: 16 grams (Offset) Brass Tail Plate: 14. 4 grams The front plate mounts under the servo and will raise your

Mini Drag Car Weight Tuning Set: The weight tuning set allows you to adjust or add weight with 1 mm thick brass plates and a 1mm front Plate for your electronics if you decide you do not need the brass up front.

Aluminum Front E-Plate: 6.4 grams
Brass Front E-Plate: 21.8 grams
Brass Full Battery Plate: 24.2 grams
Brass Pocket Battery Plate: 16 grams (Offset)
Brass Tail Plate: 14.4 grams

The front plate mounts under the servo and will raise your servo 1mm. There are three mounting holes in the plate +6mm and +8mm. These or for people who have drilled the chassis to move the servo forward to use it without the servo saver. You can also use them as a template to make your drill point for moving the servo.

The battery plate come in two configurations. You have a Full plate and a plate with a cut out. The cut out plate lets you flip the void front or rear to shift the weight bias.

The tail plate adds additional weight, lowers the chassis plate 1mm, and adds a touch of stiffness to the rear of the chassis. The plate will allow for both of the included wheelbases that are built into the chassis.

Parts are but from 1mm Brass and bonus aluminum plate is 1mm aluminum.