Motul DOT 4 Brake Fluid

Motul DOT 4 Brake FluidMotul DOT 4 Brake Fluid 500ml MOTUL DOT 4 has very good thermal resistance and stability. Typical dry boiling point (257C 494F) is superior to conventional fluids DOT 4 (230C 446F), and therefore enables effective brake even under extreme conditions. Typical wet boiling point (162C 323F) is superior to conventional fluids DOT 4 (155C 311F), and therefore enables longer use of the product. DOT 4 brake fluids have the property to absorb humidity in the

Motul DOT 4 Brake Fluid - 500ml

MOTUL DOT 4 has very good thermal resistance and stability. 

• Typical dry boiling point (257°C / 494°F) is superior to conventional fluids DOT 4 (230°C / 446°F), and therefore enables effective brake even under extreme conditions.
  
• Typical wet boiling point (162°C / 323°F) is superior to conventional fluids DOT 4 (155°C / 311°F), and therefore enables longer use of the product.
  
• DOT 4 brake fluids have the property to absorb humidity in the air, which reduce their boiling points and consequently security.
  
• The wet boiling point is representative of the fluid after one year of use. Perfectly neutral with seals used in braking systems. Anti-corrosion.
  

STANDARDS 

• FMVSS No. 116
  
• DOT 4 SAE J 1704
  
• ISO 4925
  
• KS M2141
  
• JIS K2233
  

RECOMMENDATIONS 

• Mixable with DOT 3, DOT 4 and DOT 5.1 NON SILICONE BASE products.
  
• Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM).
  
• Store brake fluid in its original container, tightly closed to avoid absorption of moisture.
  
• Aggressive chemical product if contact with hands, paint or varnish.
  
• In case of skin contact, rinse thoroughly with water.
  
• For safety advice, draining once a year is recommended.
  

PROPERTIES

• 100% synthetic fluid
  
• Color: Amber
  
• Dry boiling point: 257°C / 494°F
  
• Wet boiling point: 162°C / 323°F
  
• Viscosity at -40°C: (-40°F) 1288 mm²/s
  
• Viscosity at 100°C: (212°F) 2.1 mm²/s