Spacare Spa Sanitiser 5kg

Spacare Spa Sanitiser 5kgDescription Spacare Spa Sanitiser 5kg For the control of Algae and Bacteria in Spas and Hot Tubs. General Instructions: The correct level of free chlorine should be maintained for several hours before and during swimming activity Chlorine levels and pH should be tested daily by use of a reliable test kit using fresh testing reagents. If pH falls below the required level add Spa Care pH and Alkalinity Increaser; if it rises above add Spa Care pH and

Description
Spacare Spa Sanitiser 5kg

For the control of Algae and Bacteria in Spas and Hot Tubs.

General Instructions:
The correct level of free chlorine should be maintained for several hours before and during swimming activity
Chlorine levels and pH should be tested daily by use of a reliable test kit using fresh testing reagents.
If pH falls below the required level add Spa Care pH and Alkalinity Increaser; if it rises above add Spa Care pH and Alkalinity Reducer.
Dose pool in the evening when the pool or spa is not in use.
Stabiliser levels MUST be tested fortnightly by your local pool shop or by use of a reliable test kit. Once stabiliser levels reach 50 mg/L DO NOT use this product until stabiliser levels fall below that level. INSTEAD use an unstabilised chlorine product to maintain free chlorine levels. If 50 mg/L of stabiliser is exceeded the ability of the chlorine to control algae and bacteria is reduced.
UNDER NO CIRCUMSTANCES should stabiliser levels be allowed to exceed 100 mg/L. If stabiliser concentration needs to be reduced consult your local pool shop. Specifications
Directions for use:
DO NOT use this product in indoor pools or commercial spa installations.
Dosage rate:
6 grams for every 1000L of water
60 grams for every 10,000L of water
Minimum free chlorine level:
Cold Water – 2mg/L
Water temp greater than 26degC – 3mg/L