SKU: 25602406942

Handmade Damascus Drop Point EDC Knife Fixed Blade Stag Handle Brass Bolster

Sale price$116.10 Regular price$129.00
Save 10%

Pay in installments of $32.25 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Sep 8 - Sep 13

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Handmade Damascus Drop Point EDC Knife Fixed Blade Stag Handle Brass BolsterThis knife sits in your hand like it was made for it because it was. The drop point tip angles down with control. The brass bolster catches the light. The 200 layer Damascus pattern runs clean from tip to guard. This is a fixed blade you carry every day and reach for first. What Makes This Damascus Drop Point Knife Different Most utility knives are stamped from flat stock and sharpened. This one is built layer by layer hammered under heat, shaped by

This knife sits in your hand like it was made for it — because it was.

The drop point tip angles down with control. The brass bolster catches the light. The 200-layer Damascus pattern runs clean from tip to guard.

This is a fixed blade you carry every day and reach for first.

What Makes This Damascus Drop Point Knife Different

Most utility knives are stamped from flat stock and sharpened. This one is built layer by layer — hammered under heat, shaped by hand, finished with intention.

You feel the difference the moment you grip it. The weight is right. The edge is ready.

No two come out of the forge the same.

The Blade — 200-Layer Damascus Drop Point

This Damascus drop point knife starts with 200+ layers of high-carbon and stainless steel. Hardness sits at 55–58 HRC — sharp enough for precision work, tough enough for hard daily use.

The drop point geometry keeps the tip controlled and strong. It doesn't wander. It goes exactly where you point it.

The acid-etched finish pulls the full Damascus pattern to the surface. The blade looks different in every light.

The Drop Point Design — Built for EDC

The drop point fixed blade is the most versatile blade shape made. The tip sits low and strong — it won't snap under pressure the way a clip point will.

That makes it ideal for everyday carry tasks: breaking down boxes, cutting cordage, food prep at camp, opening packaging without destroying it.

It's a utility knife that earns its place on your belt every single day.

The Handle — Stag Horn with Brass Bolster

The stag horn handle is selected piece by piece. No two look alike — color shifts from pale cream to deep amber, and the natural texture gives you grip without cutting into your palm.

The brass bolster sits between blade and handle, adding weight at exactly the right point. It also protects the handle material from the wear and moisture that comes with daily use.

In a bare hand, it feels solid and warm. In a gloved hand, the texture locks it in place.

The Build — Full Tang, Brass Bolster, Real Balance

This is a full-tang knife. The steel runs through the entire handle — no hidden joints, no weak points hiding behind the scales.

The brass bolster shifts the balance point just forward of center. The knife sits naturally in a working grip — not too tip-heavy, not handle-heavy.

Solid. Authoritative. The kind of knife you carry for ten years and still trust on day one.

The Sheath — Leather, Fitted, Ready to Carry

The included leather sheath is hand-stitched and form-fitted to this blade. The knife seats firmly — no rattle, no movement on the draw.

Carry it on your belt or clip it to your pack. Draw is clean and one-handed, even with gloves on.

Use — Damascus Utility Knife

This knife handles the everyday tasks that dull cheap blades in a week: cutting rope, food prep at camp, breaking down gear, carving wood, slicing packaging at the job site.

EDC users, tradesmen, campers, and hunters all reach for a drop point fixed blade because it handles everything without specializing in nothing.

A hand-forged Damascus utility knife holds its edge longer than machine-stamped steel — less time on the stone, more time working.

The JW SteelCrafts Difference

Every knife we forge is one of a kind. No production run. No two blades, no two handles, look exactly the same.

We ship from Texas — domestic orders arrive in 5–10 business days. Our buyers have left 829+ verified reviews, averaging 4.91★.

That rating comes from people who use these knives, not people who frame them.

SPECS TABLE

Feature Detail
Blade Steel 200-layer Damascus (high-carbon + stainless)
Layer Count 200+
Blade Hardness 55–58 HRC
Blade Finish Acid-etched, hand-polished edge
Blade Style Drop point, fixed blade
Handle Material Natural stag horn
Bolster Solid brass
Tang Full tang
Includes Leather sheath
Ships From Texas, USA
Lead Time 5–10 business days (domestic)
Made By Hand-forged artisans

WHO IS THIS FOR?

Everyday carry users who want a fixed blade they can trust at work, at camp, and on the trail — without carrying three different knives.

Campers and tradesmen who need a Damascus utility knife that handles food prep, rope cutting, and gear work without dulling after a week.

Collectors who use their knives — and want a drop point fixed blade with Damascus steel and brass hardware that looks as good as it performs.

Gift buyers who want something handmade and one-of-a-kind for a man who carries a knife every day and knows the difference between good steel and great steel.

HOW TO USE IT

Hold the stag horn handle with a full four-finger grip — the brass bolster gives your index finger a natural stop point.

For utility cutting, use the belly of the blade. Short, controlled strokes work better than long pulls on a drop point.

Use the tip for precision: piercing, detail carving, opening seams. The drop point keeps it strong under pressure.

For food prep at camp, rinse and dry the blade between tasks — Damascus steel reacts to acidic foods if left wet.

Keep your strokes deliberate. This knife is built for control across a wide range of tasks.

HOW TO CARE FOR YOUR Damascus Drop Point Knife

After every use:

  • Hand-wash with warm water and mild soap
  • Dry immediately with a clean cloth — never air dry
  • Never put it in a dishwasher

Every few weeks:

  • Apply a thin coat of food-safe mineral oil to the blade
  • Wipe off the excess with a dry cloth
  • This keeps the Damascus pattern vivid and prevents rust

Storage:

  • Keep in the leather sheath
  • Store away from moisture
  • Never store in a sealed plastic bag — trapped humidity causes rust

Sharpening:

  • Use a whetstone or ceramic rod at the original bevel angle
  • Finish with a leather strop to restore the edge
  • Avoid electric sharpeners — they remove too much metal and damage Damascus layers

FAQs — Damascus Drop Point Utility Knife

Q: What steel is this Damascus drop point knife made from?

200-layer Damascus steel — high-carbon and stainless folded together, hardened to 55–58 HRC. It holds a sharp edge through hard daily use and is far tougher than single-steel utility blades.

Q: Is this a good everyday carry utility knife?

Yes. The drop point fixed blade handles rope cutting, food prep, camp work, and job site tasks without switching blades. It's built to be carried and used daily, not stored in a display case.

Q: Does this Damascus utility knife come with a sheath?

Yes — a hand-stitched leather sheath fitted to this blade. It carries on a belt, draws one-handed, and protects the edge during daily carry and storage.

Q: Is it legal to own a fixed blade knife in the USA?

Fixed-blade knives are legal to own in all 50 states. Carry laws vary by state and city — check your local regulations before carrying in public.

Q: How do I sharpen a Damascus drop point knife?

Use a whetstone or ceramic rod at the original bevel angle. Finish with a leather strop. Avoid electric sharpeners — they strip too much steel and can damage the Damascus layers.

Can I customize this knife?

Yes. JW SteelCrafts takes custom orders — handle material, blade length, engraving. Contact us through the website to talk through your order before we start forging.

Q: How long will this Damascus utility knife last?

Decades, with basic care. Oil the blade, hand-wash it, store it dry. The steel doesn't wear out. Neglect — leaving it wet or letting acid sit on the blade — does the damage.

Q: Is this a good gift for someone who carries a knife every day?

Yes. It's handmade, one-of-a-kind, and built for daily use. The stag horn handle and brass bolster make it look exceptional. Knife users, tradesmen, hunters, and outdoorsmen all appreciate a blade this well made.

For Gifting

This knife makes a strong gift for Father's Day, Christmas, a work anniversary, or retirement from a trade where a good knife was always on the belt.

It's also a groomsman gift that actually gets used — the kind of thing a man carries for the next twenty years and remembers who gave it to him.

It ships presentation-ready — no extra wrapping needed.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 25602406942

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 30 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
A
Verified Purchase
Aaron
Omaha, US
★★★★★ 5
Great 10gbps USB-C Hub, worked with Anker support through compat issues with PD4 iteration 1
Original Review (updates below): ----- The moment I noticed this thing on Amazon, I bought it and it literally just arrived. Finally, 4K60 over just USB-C with other ports (including making up to 10Gbps available to them) for a reasonable price. Unfortunately, the first two things I've done with it were both disappointing. I'll cut to the chase, the power delivery pass through isn't working with one of their own chargers. The first device I tried connecting this with is my Anker PD4 with one USB-C cable as the only thing plugged into it so I can test the truly up to 100W (-15 for its own power) claims. I've tried connecting it with Apple's 2m USB-C charge cable (100w capable) and an equivalent CableMatters cable that also supports 100W. When plugged directly into my laptop, both of these cables immediately start charging it and show up as 100W power sources. When this Anker hub is plugged in and either of them is connected to the power delivery port on the side of it, the laptop does not charge (laptop is a 16" Macbook Pro, I've tried multiple ports just for the heck of it). My second complaint is that when absolutely nothing is plugged into it, it becomes fairly warm to the touch. Why, when it's doing nothing, is it hot? I'm clearly not running data or even power through it so I have low hopes for it under load. The fact that it doesn't work in exactly the scenario they want it to most (a MacBook Pro with one of their own chargers) seems like a pretty big fail. I've got lots of USB-C things though so I thought I'd grab a couple and try those. Using an Apple 96W USB-C charger, the device does pass through power delivery properly. It shows up as providing 79W to the laptop (siphoning off 17W in this instance). I also have a 56W Aukey charger that splits power between a USB-A port and a USB-C port that can provide 45W of power delivery. When plugged into that charger it does appear to work as well and appears in macOS as a 30W power source. Maybe the problem is the Anker PD4? But it works fine providing power to the laptop directly. Would love to hear from Anker about these two products working together and what I should actually expect. Having it be unreliable for power delivery isn't great, but power and heat aside (it is getting a little bit warmer now that it's providing power from the Apple power adapter, but still definitely holdable), the hardware looks and feels good and the cable feels durable. Worth also noting that there's a white LED ring on the side of it that appears to be always on when it's plugged in. Don't know why it needs an LED. ----- Update, June 22, 2020: I've done some more testing and Anker has reached out to me to investigate what might be the issue. I can say that the hub works as I would expect from a quick test with my iPad Pro 11" with the above functioning chargers. It was able to pass through power with the 96W Apple Charger on the other end to both the iPad port as well as a Magic Keyboard port. The ethernet adapter showed up in iOS settings and an external drive was functional. When connected via the Magic Keyboard, which is a power only connection, as expected it provided only power. Still no power passthrough of any kind when connected to the PD4. ----- Update July 1, 2020: I've written back and forth with Anker and they've sent me a replacement hub. It also doesn't work with the PD4. I've tried multiple USB-C cables but they have also shipped a cable to test with it. For now I'm increasing the review from 2 to 3 stars because I am more and more suspicious about the PD4 and less about this hub. They claim that they have tested the setup I have separately without issue, and I've sent video showing the problems I've encountered, so the troubleshooting is ongoing. Have had a chance to use Ethernet on it without issue. Still need to try to test out its throughput when trying to use a 10Gbps USB-C enclosure and a 4K60 monitor at the same time (+ ethernet). More updates to come. ----- Update July 10, 2020: I've continued to talk with Anker support and they shipped me a replacement PD4. The one I had was labeled as "Iteration 1" on its barcode, the one I got back was labeled "Iteration 2". I tested it out and it works perfectly with this hub, passing through the correct amount of power to multiple Macbook Pros and fast charging an iPad Pro. Clearly the fault doesn't lie with this hub and is instead an issue with the first iteration PD4, so I'm updating my review accordingly. Working with Anker support was great. I've also been able to test USB-C throughput (without driving a display as well so far) and it properly utilizes 10Gbps. I've attached some extra images showing various devices connected to it (keyboard dongle, SD card, USB-C 10Gbps external SSD enclosure, USB sound card, ethernet).
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 19, 2020
J
Verified Purchase
Juan Muratalla
San Leandro, US
★★★★★ 5
Excellent Quality and Reliable Performance from Anker’s 8-in-1 USB-C Hub
I’m really impressed with this Anker USB-C Hub with Ethernet (8-in-1). The build quality feels premium, setup was completely plug-and-play, and all ports work flawlessly with my laptop. The Ethernet connection is stable and fast, which has been perfect for work calls and large file transfers. I also love how compact and portable it is while still offering plenty of connectivity options. HDMI output looks great, USB ports transfer quickly, and the SD card reader is very convenient for photo and video work. Anker continues to deliver reliable products, and this hub is no exception. Highly recommended if you need a dependable all-in-one USB-C hub for productivity or travel.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
T
Verified Purchase
Tommy
Lake Worth, US
★★★★★ 5
Works great (quick test)
Just got this and tested and works great I attached to my MacBook with Ethernet and had a solid connection I tested my steam deck by plugging in Ethernet then adding HDMI then adding power and everything worked as it was plugged in I tested my Nintendo switch even though it clearly states it's not supported and it did not work at all. Even the power pass through did nothing. This is not even remotely a problem since it was advertised as such but I figured it was with a try and worth noting
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 31, 2026
K
Verified Purchase
kunoh
Natrona Heights, US
★★★★★ 4
Despite some caveats; this is a versatile hub
The Anker 555 8-in-1 USB-C Hub is a good buy if you’re looking for a hub from a reputable brand. I use it with an M1 Macbook Air, and it has been reliable so far. This hub has the following ports: 1 USB-C data port, 1 USB-C Power Delivery Port, 2 USB-A data ports, 1 HDMI port, an Ethernet port, and a microSD/SD card reader. Charging, PD (Power Delivery): To keep my Macbook charging, I connect a PD (Power Delivery) capable cable to the USB-C port meant for PD. (The other USB-C Port on this hub is meant only for data.) Once connected, the hub will eventually become warm to the touch, but this hasn’t caused any problems so far. Video Performance - no problems in 1440p I can connect my 1440p 144hz monitor to this hub’s HDMI port and my Macbook Air has no problem outputting a refresh speed of 144hz, as well the lower refresh rates of 120hz and 60hz. (I do not have a 4k monitor, so I could not test that.) USB-A Ports - works flawlessly I’ve tried keyboards, USB Drives, and even gaming Mice. All of these devices work as expected when connected to the USB-A Ports. Ethernet - Excellent speed I've connect this hub using an Ethernet cable to Gigabit speed Internet. The speed is just as fast as other computers on the network, and there is no slowdown at all, even with most of the ports on the hub being used. Gaming Keyboards with USB-C connectors - some issues. Some peripherals such as keyboards with USB-C connectors may not work on the USB-C ports on this hub. I tried using a Glorious GMMK Mechanical Keyboard and it did not work with this hub’s USB-C ports. (Of course you could try to simply use a USB-C to USB-A adaptor and then connect via the other USB ports on the hub instead.) Extension Cable - Use a Thunderbolt 4 cable Although this is totally optional, I like to use a small, 6-inch USB-C Extension cable to allow this hub to have more slack away from my laptop when connected. To allow this to work, I had to use a Thunderbolt 4 extension cable. I've tried other cables such as a Thunderbolt 3 extension cable. However, some of the attached devices on the hub were not recognized. Only the the Thunderbolt 4 extension cable allowed all my attached devices to be recognized. Other devices I have successfully connected an external SSD via the USB-C data port on this hub. I also regularly use an external DAC using the USB-A ports connecting to an IFI HIP DAC. Both of these devices work perfectly with this hub. Data transfer speed is rated at 10Gbs, though I haven't actually confirmed that. It works well enough for my purposes of transferring text documents and the occasional batch of vacation photos to my external SSD. Conclusion This hub from Anker is rated at 10Gbs which is plenty for me. But if you regularly transfer large amounts of data (like for video editing), I would instead recommend a powered docking station such as those from CalDigit. But for me, this portable hub does everything I need, and for much less money.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 28, 2023
S
Verified Purchase
SamCat
Natrona Heights, US
★★★★★ 5
Almost perfect, could use one more USB-C Gen 2 port and a metal case instead of plastic.
Never really had any problems with Anker gear, I've come to trust the brand name. This little hub is almost perfect for use with my 2019 MacBook Pro, but where Anker really dropped the ball is by not adding one more USB-C port. I mean, there's two, but if one is dedicated to power devices only that doesn't really leave much room for expansion by only giving you one extra, I mean they were thoughtful enough to give you two USB-A ports. I do like that the USB-C and two USB-A ports are version 3.2 Gen 2 rated for up to 10Gbps transfer speeds versus Gen 1 at 5Gbps. The plastic casing does get hot, not sure if aluminum metal would be any better, but it would feel nicer, plastic just feels cheap. Also, a dark case with dark letter printing doesn't work because you can't see the writing, should have used lighter letter coloring. Otherwise, solid performer. I'll keep it along with my other one because having two hubs with a laptop is convenient so I don't have to always haul a hub around from place to place. PROS: • 1 USB-C port version 3.2 Gen 2 rated up to 10Gbps. • 2 USB-A ports version 3.2 Gen 2 rated up to 10Gbps. • Also includes, HDMI, Ethernet, SD and micro SD card ports. CONS: • Plastic casing, gets hot. • Should have one more USB-C port. • Port description lettering is too dark, gets lost against dark case color, should have used white or silver lettering instead. • No audio port.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 7, 2024

recommand products