NB-3DTP-NO 3D Touch Probe (NPN-NO) for 3-Wire Interface, Compatible with GRBL & Mach3 Systems

NB-3DTP-NO 3D Touch Probe (NPN-NO) for 3-Wire Interface, Compatible with GRBL & Mach3 SystemsApplication The 3 axis XYZ CNC probe is designed for a wide range of CNC applications, including fast zero point acquisition, surface flatness measurement, and measuring workpiece geometries such as edges, holes, grooves, studs, angles, and corners. Specifications Power: DC 524V; Wiring: NPN NO (outputs a high level signal when powered and switches to a low level signal when triggered); Repeatability: 0. 01 mm 0. 0004 in; Feed Rate: 50200 mm min;

• Application

The 3-axis XYZ CNC probe is designed for a wide range of CNC applications, including fast zero-point acquisition, surface flatness measurement, and measuring workpiece geometries such as edges, holes, grooves, studs, angles, and corners.

• Specifications

Power: DC 5–24V; Wiring: NPN-NO (outputs a high-level signal when powered and switches to a low-level signal when triggered); Repeatability: 0.01 mm / 0.0004 in; Feed Rate: 50–200 mm/min; Overtravel Protection: XY axis ±4 mm / 0.16 in, Z axis 2 mm / 0.08 in; Trigger Force: XY axis 0.5–0.82 N, Z axis 1.6 N.

• compatibility

Compatible with GRBL, Mach3, Mach4, LinuxCNC, UCCNC, Centroid CNC, and other CNC control software with probing functions, as well as control boards that support 3-input probe connections (such as GRBL-based systems and Mach3-based controller boards), including all NymoLabs machine control boards.            NymoLabs machines can be directly connected to the probe interface out of the box, with no additional wiring required.

• Note:

The product has been factory calibrated. Please ensure you use an ER11 collet with AAA grade or higher, otherwise the concentricity of the probe tip may be affected. If any measurement deviation occurs, please check and adjust it by yourself.