Innovacar SC5 Long Lasting Matte Tire And Trim Dressing

Innovacar's SC5 is a SiO₂ product and a state-of-the-art tire dressing that can renew, regenerate, moisturize and protect the appearance of the car's tires with its modern water-based formulation.

The main features of this product are:

• Ease of use: its consistency makes it easy to use, avoiding product waste and allowing both dry and wet application. Moreover, thanks to the special substances it contains, surface tension is reduced during application, and it can be applied in a single application without any rubbing.
• Definable finish: with the dilution from pure to 1:3 you can control the depth of color and gloss to achieve the desired result.
• Fast drying: drying times are fast to avoid unpleasant product splashes if you move the car quickly once it has been applied.
• Protective barrier: once cured, it creates a repellent and self-cleaning layer that lasts for many kilometers, resisting rain and protecting the tire from UV rays, cracking and fading.
• Multipurpose: can also be used on plastics, bumpers, dashboard and engine compartment.

Average consumption:

• Per single tire: 5-10 ml
• Per set of 4 tires: 20-30 ml

Summarised technical data:

• Self-cleaning capacity: 5/5
• Beading: 5/5
• Colour depth: 5/5
• Duration : 5/5
• Drying: in 20 minutes.
• Curing time: after 7 hours
• PH: 7

• Restoring the finish of tires to a brand-new appearance;
• Preserving the effect of freshly washed tires for several days, giving the feel of a freshly cleaned car;
• Having a product that can be used both on tires and other car elements such as bumpers, plastics, dashboard and engine compartment;

How to renew, regenerate and moisturize the finish of your car's tires and tires with SC5 Tire Dressing:

The product can be used from pure to diluted 1:3 depending on the desired depth of color and gloss. We recommend diluting only as much product as is necessary for application. If a greater depth of color and gloss is desired, the product can be reapplied after 15-30 min.

For use on tires:

1. Thoroughly prepare the tires with a prewash using 100% DEGREASING or SP1 PREWASH, helping if necessary with the TIRE BRUSH tire brush.
   1. For 100% DEGREASING 500 ml size use pure;
   2. For 100% DEGREASING 4.54 L size use a 1:3 dilution then use 250 ml of product and fill the remaining part with water, 750 ml, to make a 1 L ready-to-use solution;
   3. For SP1 PREWASH use a dilution of 1:5 to 1:10 then use 160 ml to 90 ml of product and fill the remainder with water, 840 ml to 910 ml, to make a 1 L ready-to-use solution;
2. Perform tire decontamination and washing with SD1 IRON, helping if necessary with a medium bristle brush;
3. Proceed with a pass of D2 CHECK with a dedicated microfiber to remove traces of previous protectants and any remaining residue;
4. Shake SC5 TIRE DRESSING and apply a portion of the product to the MICRON APP microfiber applicator and proceed to spread the product evenly over the entire tire;
5. For durability, it is recommended to let the product absorb by removing the excess after 15-30 minutes;
6. If you want more color depth and shine, a second coat can be reapplied 15-30 min apart;
7. The product is fully activated after 7 hours;

For use on bumpers, plastics, dashboard and engine compartment:

1. Thoroughly prepare the substrate with a thorough washing and then use D2 CHECK on the fascias, outer plastics, and engine compartment or 0 AMMONIA for the inner plastics and dashboard.
   1. For D2 CHECK dilute 1:3 then use 250 ml of product and fill the remaining part with 750 ml water to make a 1 L ready-to-use solution;
   2. For 0 AMMONIA dilute 1:10 then use 90 ml of product and fill the remaining part with 910 ml water to make a 1 L ready-to-use solution;
2. Shake SC5 TIRE DRESSING and apply a portion to the MICRON APP microfiber applicator and proceed to spread the product evenly over the entire surface;
3. For durability, it is recommended to let the product absorb by removing the excess after 15-30 minutes;
4. If you want more color depth and shine, you can reapply the product 15-30 min apart;
5. The product is fully activated after 7 hours;

For tire maintenance:

1. Use SP1 PREWASH for a touchless prewash;
2. Proceed with a subsequent cleaning with SD1 IRON THIXO RAPID with the help of a medium hardness brush if necessary;

Precautions: since the product is a microemulsion, shake well before use, especially in diluted form. We recommend applying the product pure and on dry tires for best performance and durability. Do not apply the product on the tread.

PRODUCT CODE

701090 - SC5 TIRE DRESSING 500 ml

SAFETY INFORMATION

The product is not considered dangerous according to EC Regulation 1272/2008 (CLP).

Click here to download the data sheet