eSUN ePLA-ST 1.75mm 1KG 3D Printer Filament

eSUN ePLA-ST 1.75mm 1KG 3D Printer FilamentTough PLA filament with high impact resistance, high elongation at break, high bonding strength and high printing accuracy. This filament has toughness greater than PETG, and it has good printability and toughness of PLA, suitable for printing mechanical parts with toughness and precision requirements. eSun ePLA ST Features Super Tough PLAPLA ST has better toughness, higher impact strength, higher elongation at break, better bending resistance, not

Tough PLA filament with high impact resistance, high elongation at break, high bonding strength and high printing accuracy. This filament has toughness greater than PETG, and it has good printability and toughness of PLA, suitable for printing mechanical parts with toughness and precision requirements.

eSun ePLA-ST Features：

• 【Super Tough PLA】PLA-ST has better toughness, higher impact strength, higher elongation at break, better bending resistance, not easy to break, good printability. Suitable for printing mechanical parts with higher requirements for impact resistance and precision.
• 【Stable Dimensional Tolerance】Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, no bubbles, easy handling, resulting in an outstanding surface finish and are highly precise.
• 【Tangle Free & No Plugging】Full 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder, high successful printing rate.
• 【High Compatibility】Compatible with Most of FDM 3D Printers on Market. Widely used in mechanical models, structural parts and functional parts, such as industrial design, consumer electronics, auto parts, IT manufacturing, mechanical and electrical fields.
• 【Vacuumed Sealed Packaging】Filament Net Weight: 1KG. eSUN filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.

Model: eSun ePLA-ST
Diameter Format: 1.75mm
Net Weight: 1kg
Printing Temperature: 200-230℃ (Recommended Temperature 215℃)
Bed Temperature: 45-60℃
Density: 1.25 g/cm3
Tensile Strength: 34.3 MPa
Elongation at Break: 90%
Flexural Strength: 43 MPa
Flexural Modulus: 1477 MPa
IZOD Impact Strength: 63 KJ/m²
Melt Flow Index (g/10min): 3.2(190℃/2.16kg)
Heat Distortion Temperature: 52 (℃, 0.45 MPa)
Tolerance: ±0.03mm
Certificate: RoHS, Reach, TDS, MSDS
Packaging: Vacuum packed with silica desiccant
Warranty: 1 Year