Pay in installments of $1131.37 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 22 - Aug 27
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Williams AV DL210 SYS 1 2.0 Digi-Loop Large Area, Dual Channel Hearing Loop SystemThe DL210 SYS 1 2. 0 hearing loop system maximizes modern amplifier technology. Its network control capability provides seamless, remote system set up, operation, and monitoring of the induction loop system via a laptop or tablet. DSP audio processing offers flexible, powerful software control of mixing, equalization, compression, and more. Powerful Class D pulse width amplifier maximizes the efficiency of the unit. This assistive listening systems
The DL210 SYS 1 2.0 hearing loop system maximizes modern amplifier technology. Its network-control capability provides seamless, remote system set-up, operation, and monitoring of the induction loop system via a laptop or tablet. DSP audio processing offers flexible, powerful software control of mixing, equalization, compression, and more. Powerful Class D pulse-width amplifier maximizes the efficiency of the unit.
This assistive listening system’s design offers a dual 12 A rms loop output for dual loop or phased array configuration. A 70-100 V input connects to a distributed speaker/paging system, ensuring announcements are heard by hearing aid users.
Meet IEC 60118-4 standards on system performance when integrated into a correctly designed and installed system. The DL210 SYS 1 2.0 is also tested to IEC Specifications 62489-1 Benchmark Standards.
Specifications
DL210 NET 2.0
| GENERAL | |
| Dimensions | 2 RU Rackmount, 19” W x 3.5” H x 12” D. Chassis is 17” W. |
| Weight | 14.3 lbs (6.5 kg) |
| Color | Case: Black, white and blue legends on front, white legends on back. LCD: Backlit Blue. |
| Fan cooling | Variable Speed, Temperature Controlled |
| Power supply | Internal, Universal 100-240 VAC, 50/60 Hz, 250 Watt. Fuse: 5 x 20 mm, 5 A, 250 V. AC power plug is IEC 320-C14. |
| Heat output @ 120 VAC | Sleep state: 100 BTU/hr; Idle state: 146 BTU/hr; Driving two loops @ 12 A each: 1,040 BTU/hr |
| Ethernet | (1x) RJ-45; 10-100 MBps. |
| USB | (1x) standard-B. USB 1.1, 2.0 or 3.0 supported. |
| RS-232/Loop fault relay | (1x) DB-9 jack. RS-232: Pin 2=Tx, Pin 3=Rx, Pin 5=gnd. Loop fault relay: Pin 1=NC, Pin 4=Common, Pin 6=NO. Relay contact rating: 2.0 A @ 30 VDC. |
| Environment | 0-35° C ( 32-95° F), 0-90% relative humdity. |
| Coverage area* | 31,400 sq. ft. (2,917 sq. m.) (Perimeter Loop, 1:1 aspect ratio, both outputs driven) 51,660 sq. ft. (4,800 sq. m.) (Perimeter Loop, 3:1 aspect ratio, both outputs driven) |
| INPUTS | |
| Dante input | No. Dante input available on DL210 NET D 2.0 model only. |
| Mic/Line inputs | (2x) 3-position terminal block, input impedance=1.5 kΩ Mic, 10 kΩ Line. Configurable/Accepts: Mic, Line -10 dBV, Line +4 dBu, or Line +8 dBu, balanced or unbalanced. Phantom supply (48V). |
| 70-100 V input | (1x) 2-position terminal block; high/speaker-level input (accepts 25 V, 70 V or 100 V) from distributed audio/paging systems. |
| OUTPUTS | |
| Line outputs | (1x) 3-position terminal block; loop-through of Mic/Line Input 1 [&] Line Input 2, +4 dBu, Balanced or Unbalanced. The line outputs mirror the audio of the loop output. |
| Loop output(s) | (1x) 2-position terminal block per output |
| Audio output delay | Adjustable from 0 to 165 msec |
| Headphone output | (1x) 1/4” stereo headphone jack, on front of unit. Monitored input or output selectable in menu. |
| Loop fault relay | Integrated into RS-232 DB-9 jack. Pin 1=NC, Pin 4=Common and Pin 6=NO. Contact rating: 2.0 A @ 30 VDC. |
| Loop output drive voltage | 33.3 Vrms (47.1 Vpk) continuous |
| Rated loop output current* | 12 Arms(17 Apk) per output |
| Loop resistance range | 0.5 Ω to 3.0 Ω (DC) |
| Speaker output | Integrated into Loop Output A terminal block (switchable in menu). 225 Watts x 1 channel @ 4Ω, 125 Watts x 1 channel @ 8Ω, (Class D). Frequency response = 20 Hz-20 kHz, THD=0.07%. |
| AUDIO | |
| Rated load* | 0.5 Ω DC with 135 µH inductance |
| Loop frequency response | 45 Hz to 9.0 kHz ± 2 dB (1 kHz ref.) |
| Rated loop THD* | [lt]1 % at rated output current (1 kHz sine wave). |
| OTHER | |
| Front controls | Front LCD display menu access/adjustment via control button/dial. |
| Adjustable settings | Input mixing, parametric equalization, compression, metal loss compensation, high and low-pass filters, AGC and audio delay, output levels. See User Manual for adjustment range(s). |
| Internal calibration tools | Test tone generator with pink noise, loop current adjustment/matching. See User Manual for details. |
| Other features | Save/load configuration, loop test, priority input selection with adjustable threshold, loop fault relay, open/short and thermal protection. See User Manual for details. |
| Network control [&] firmware | Function control and calibration by DigiLoop PC App via ethernet (RJ-45). PC App requires Windows 7 or higher. Firmware updates through USB only. |
| Warranty | 2 years |
| Approvals | CE, UL, ULC, FCC, Industry Canada, RoHS, WEEE, CB scheme, RCM |
| Standards compliance | This product is designed to meet the IEC-60118-4 standard when correctly designed, installed and commissioned. Test Specifications provided to the IEC 62489-1 standard. |
EAR 022
| Style | Around-ear speaker |
| Plug | 3.5mm mono |
| Cord | 39" |
| Driver Size | 23 mm |
| Nominal Impedance | 32Ω |
| Freq. Response | 20 - 20kHz |
| Weight | 15g |
| Max Power Input | 30 mW |
| Sensitivity | 118 dB @ 1kHz |
PLR BP1
| Dimensions: | 4.1"H x 2.85"W x 1.38"D (104 mm H x 72 mm W x 35 mm D). |
| Weight: | 4.6 oz (130 g) with batteries, 2.6 oz (73 g) without batteries. |
| Color/Material: | Black ABS/polycarbonate molded plastic case. |
| Battery Type: | (2) AA (1.5VDC) Alkaline or NiMH (rechargeable). |
| Battery Life: | Up to 200 hours with Alkaline batteries. |
| LED Indicator: | Green LED indicates power on, flashes when batteries are low. |
| Headphone Jack: | 3.5mm stereo TRS jack works with mono or stereo headphones. |
| Volume control: | External switched thumb wheel controls power on/off and volume level. |
| Tone control: | Rotary control inside battery compartment (1kHz reference at 400mA/m input with Tone at mid position) |
| Induction Coil: | Maximum reception: receiver oriented vertically |
| Power Output: | 35mW (max) into 33 ohms mono impedance |
| THD: | [lt]2% |
| Frequency Response: | 300Hz to 10KHz, -6dB |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 23 reviews
Sort
Product Reviews
★★★★★ 5
Fastens to the windshield and stay secure
Preformed well
Good value for money
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 4
This sticks to my Chrysler Pacifica!
I bought a new-to-me Chrysler Pacifica and of course wanted a phone holder or two for when my husband and I are travelling. I absolutely adore the car, but I've never had so much trouble finding a phone holder that would stick to the dash, no matter how thoroughly I cleaned it with alcohol! Finally found this one, but it only sticks if you do NOT activate the suction part. That pulls the sticky part off the dash. And it's not very attractive on top of the dash. I'm more concerned with function than appearance so I'm happy with it, and it works great. The phone stays put and stays charged, which is all I ask.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2026
★★★★★ 5
A gift that the receiver loves and would recommend
I bought this as a gift for my son he has told me he loves it and works well,he would recommend it
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 3
Imperfect, sometimes charging is unreliable, clamp needs power to work and annoyingly not auto
The build quality is great for the price. Like iOttie. The tech advancement is cool but it doesn't work very well which is a disappointment.
It doesn't charge my phone very fast, because my phone is limited to 15 watt wireless charging, but it's great for preventing battery loss while using GPS.
The button to manually clamp and unclamp are a little too hard to press, it flexes the whole holder, so you need to press with your whole hand supporting the holder.
Sometimes my phone disconnects and reconnects randomly to this charger multiple times. Not sure if it's the charger or phone but that stinks . (I'm using an Anker 50w USB adapter for this wireless charger)
The clamping is motorized which is cool, but it's honestly less reliable than a spring loaded clamp because it doesn't always auto clamp the phone.
When this clamp is working properly it is great as it auto clamps onto a phone it's charging. But the issue is it doesn't always clamp.
It sometimes thinks it's clamped, when it's not, so you have to press the manual activation button twice so the phone will be locked in place. It's hard to know when you need to press just once or twice.
(The reason you press the button twice is if it thinks it's closed when it's actually open. Then you press first to "open" the clamp, even though it's already open, then press again to close it.
But if it knows the correct clamp position already, and just refuses to auto clamp, you only press the button once. If you press twice, you will end up cancelling the clamp. It feels random and unpredictable what the correct action is)
The clamping requires power which is another disadvantage to spring loaded hand clamps. But unclamping works without power due to a backup battery.
(Powered clamping is still better than those manual squeeze clamps, which are finicky to get a strong enough clamp on the phone)
I'm not sure how safe the battery is in a super hot car, like Florida heat. It seems fine for Pa heat.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 9, 2025
★★★★★ 5
Great product
UPDATE: Amazing customer service. I didn’t reach out, they did. After some adjustment shaking is minimal. Also regardless the charging. Well apparently my case is not compatible with fast charge. Phone charges fast without the case. Guess that has been my issue with other wireless charges. Definitely recommend. My husband went with another brand and now will be getting the same as mine.
Cool idea but definitely not super fast charge. In 40 minutes charged only 10%, was expecting more. Hold phone well but it shakes while driving. Installation was super easy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 31, 2025