Pay in installments of $1644.37 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 29 - Sep 3
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Williams AV DL210 SYS 2 2.0 D Large Area Dual Channel Hearing Loop Dante™ System with Flat WireThe DL210 SYS 2 2. 0 D hearing loop system maximizes modern amplifier technology. Its network control capability provides seamless, remote system set up, operation, and monitoring of the induction loop system via a laptop or tablet. DSP audio processing offers flexible, powerful software control of mixing, equalization, compression, and more. Powerful Class D pulse width amplifier maximizes the efficiency of the unit. The Dante input provides
The DL210 SYS 2 2.0 D hearing loop system maximizes modern amplifier technology. Its network-control capability provides seamless, remote system set-up, operation, and monitoring of the induction loop system via a laptop or tablet. DSP audio processing offers flexible, powerful software control of mixing, equalization, compression, and more. Powerful Class D pulse-width amplifier maximizes the efficiency of the unit. The Dante™ input provides integration with existing Dante™ devices and remote network management.
This assistive listening system’s design offers a dual 12 A rms loop output for dual loop or phased array configuration. A 70-100 V input connects to a distributed speaker/paging system, ensuring announcements are heard by hearing aid users.
Meet IEC 60118-4 standards on system performance when integrated into a correctly designed and installed system. The DL210 SYS 2 2.0 D is also tested to IEC Specifications 62489-1 Benchmark Standards.
PLR BP1 architectural and engineering specifications
Features
- Large-area, 48-volt induction loop system with network control, and installation wire and tape. [nbsp]
-
(1) DL210 NET D 2.0 induction loop amplifier
-
(2) PLR BP1 body-pack receivers with batteries
-
(2) EAR 022 surround earphones
-
(1) BAT KT6 Dual Drop-in Charger Kit (includes CHG 3502 Dual Drop-In Charger and (2) BAT 026-2 AA NiMH batteries)
-
(2) PLW F500 500 ft. rolls of flat power loop wire
-
(6) FWT 001 rolls of flat wire warning tape
-
(1) IDP 009 ADA Wall Plaque (T-Coil)
-
2-year Warranty on amplifier
Specifications
DL210 NET D 2.0
|
GENERAL |
|
|
Dimensions |
2 RU Rackmount, 19” W x 3.5” H x 12” D. Chassis is 17” W. |
|
Weight |
14.3 lbs (6.5 kg) |
|
Color |
Case: Black, white and blue legends on front, white legends on back. LCD: Backlit Blue. |
|
Fan cooling |
Variable Speed, Temperature Controlled |
|
Power supply |
Internal, Universal 100-240 VAC, 50/60 Hz, 250 Watt. Fuse: 5 x 20 mm, 5 A, 250 V. AC power plug is IEC 320-C14. |
|
Heat output @ 120 VAC |
Sleep state: 100 BTU/hr; Idle state: 146 BTU/hr; Driving two loops @ 12 A each: 1,040 BTU/hr |
|
Ethernet |
(1x) RJ-45; 10-100 MBps. |
|
USB |
(1x) standard-B. USB 1.1, 2.0 or 3.0 supported. |
|
RS-232/Loop fault relay |
(1x) DB-9 jack. RS-232: Pin 2=Tx, Pin 3=Rx, Pin 5=gnd. Loop fault relay: Pin 1=NC, Pin 4=Common, Pin 6=NO. Relay contact rating: 2.0 A @ 30 VDC. |
|
Environment |
0-35° C ( 32-95° F), 0-90% relative humdity. |
|
Coverage area* |
31,400 sq. ft. (2,917 sq. m.) (Perimeter Loop, 1:1 aspect ratio, both outputs driven) 51,660 sq. ft. (4,800 sq. m.) (Perimeter Loop, 3:1 aspect ratio, both outputs driven) |
|
INPUTS |
|
|
Dante input |
DL210 NET D 2.0 model only. (1x) RJ-45;100 Mbps. Minimum latency: 2 ms. Audio sample rates supported: 44.1, 48 kHz. Resolution: 24 bits. |
|
Mic/Line inputs |
(2x) 3-position terminal block, input impedance=1.5 kΩ Mic, 10 kΩ Line. Configurable/Accepts: Mic, Line -10 dBV, Line +4 dBu, or Line +8 dBu, balanced or unbalanced. Phantom supply (48V). |
|
70-100 V input |
(1x) 2-position terminal block; high/speaker-level input (accepts 25 V, 70 V or 100 V) from distributed audio/paging systems. |
|
OUTPUTS |
|
|
Line outputs |
(1x) 3-position terminal block; loop-through of Mic/Line Input 1 [&] Line Input 2, +4 dBu, Balanced or Unbalanced. The line outputs mirror the audio of the loop output. |
|
Loop output(s) |
(1x) 2-position terminal block per output |
|
Audio output delay |
Adjustable from 0 to 165 msec |
|
Headphone output |
(1x) 1/4” stereo headphone jack, on front of unit. Monitored input or output selectable in menu. |
|
Loop fault relay |
Integrated into RS-232 DB-9 jack. Pin 1=NC, Pin 4=Common and Pin 6=NO. Contact rating: 2.0 A @ 30 VDC. |
|
Loop output drive voltage |
33.3 Vrms (47.1 Vpk) continuous |
|
Rated loop output current* |
12 Arms(17 Apk) per output |
|
Loop resistance range |
0.5 Ω to 3.0 Ω (DC) |
|
Speaker output |
Integrated into Loop Output A terminal block (switchable in menu). 225 Watts x 1 channel @ 4Ω, 125 Watts x 1 channel @ 8Ω, (Class D). Frequency response = 20 Hz-20 kHz, THD=0.07%. |
|
AUDIO |
|
|
Rated load* |
0.5 Ω DC with 135 µH inductance |
|
Loop frequency response |
45 Hz to 9.0 kHz ± 2 dB (1 kHz ref.) |
|
Rated loop THD* |
[lt]1 % at rated output current (1 kHz sine wave). |
|
OTHER |
|
|
Front controls |
Front LCD display menu access/adjustment via control button/dial. |
|
Adjustable settings |
Input mixing, parametric equalization, compression, metal loss compensation, high and low-pass filters, AGC and audio delay, output levels. See User Manual for adjustment range(s). |
|
Internal calibration tools |
Test tone generator with pink noise, loop current adjustment/matching. See User Manual for details. |
|
Other features |
Save/load configuration, loop test, priority input selection with adjustable threshold, loop fault relay, open/short and thermal protection. See User Manual for details. |
|
Network control [&] firmware |
Function control and calibration by DigiLoop PC App via ethernet (RJ-45). PC App requires Windows 7 or higher. Firmware updates through USB only. |
|
Warranty |
2 years |
|
Approvals |
CE, UL, ULC, FCC, Industry Canada, RoHS, WEEE, CB scheme, RCM |
|
Standards compliance |
This product is designed to meet the IEC-60118-4 standard when correctly designed, installed and commissioned. Test Specifications provided to the IEC 62489-1 standard. |
EAR 022
| Style | Around-ear speaker |
| Plug | 3.5mm mono |
| Cord | 39" |
| Driver Size | 23 mm |
| Nominal Impedance | 32Ω |
| Freq. Response | 20 - 20kHz |
| Weight | 15g |
| Max Power Input | 30 mW |
| Sensitivity | 118 dB @ 1kHz |
FWT 001
| Description | Cloth-based warning tape, 2 in. Width, 165 ft Length per roll. |
| Dimensions | 6" Dia x 2" W x 165' L Roll |
| Weight | 1.28lbs |
| Color | White cloth. Williams Sound logo, T-Coil Logo, and Warning Text. |
| Warning Text | Warning: Do not cut or disturb - Hearing assistance induction loopwire |
| Used with | PLW F300, PLW F500 |
PLR BP1
|
Dimensions: |
4.1"H x 2.85"W x 1.38"D (104 mm H x 72 mm W x 35 mm D). |
|
Weight: |
4.6 oz (130 g) with batteries, 2.6 oz (73 g) without batteries. |
|
Color/Material: |
Black ABS/polycarbonate molded plastic case. |
|
Battery Type: |
(2) AA (1.5VDC) Alkaline or NiMH (rechargeable). |
|
Battery Life: |
Up to 200 hours with Alkaline batteries. |
|
LED Indicator: |
Green LED indicates power on, flashes when batteries are low. |
|
Headphone Jack: |
3.5mm stereo TRS jack works with mono or stereo headphones. |
|
Volume control: |
External switched thumb wheel controls power on/off and volume level. |
|
Tone control: |
Rotary control inside battery compartment (1kHz reference at 400mA/m input with Tone at mid position) |
|
Induction Coil: |
Maximum reception: receiver oriented vertically |
|
Power Output: |
35mW (max) into 33 ohms mono impedance |
|
THD: |
[lt]2% |
|
Frequency Response: |
300Hz to 10KHz, -6dB |
PLW F500
| Length | 500 ft (152.4 m) |
| Width | OD: 22 mm (with insulation) ID: 19 mm (bare copper) |
| Thickness | OD: 0.17 mm (with insulation) ID: 0.1 mm (bare copper) 0.0335 in - when paired with warning tape (FWT 001) |
| Cross Sectional Area (Bare Copper) | 1.9mm2 |
| Spool Dimensions | 8-1/8” W x ¾” H (20.6 cm W x 1.9 cm H) |
| Spool Weight | 6.5 lbs (2.9 kg) |
| Color/Material | Copper with Mylar (polyester) encapsulation |
IDP 009
10-3/8" (L) x 6-¼" (W) x 1/8" (H)
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy