Bosch Glassbreak Tester

The DS1110i Glassbreak Tester is a compact, handheld tool designed to simulate glass break events so you can quickly validate and calibrate Bosch alarm detectors in residential, commercial, and industrial security systems. Built to test DS1101i, DS1102i, DS1103i, and DS1108i Glass Break Detectors, this tester helps security installers verify coverage, ensure reliable detector responses, and streamline field servicing. Powered by a 9 V alkaline battery (supplied), the DS1110i delivers consistent, repeatable test signals with minimal setup, allowing technicians to confirm detector performance on-site without guesswork. Whether you’re commissioning a new installation, performing routine maintenance, or validating post-glass events after glazing work, this tester provides a dependable, easy-to-use solution that aligns with professional security practices.

• Realistic test signals for reliable verification — The DS1110i generates authentic glassbreak cues that closely resemble real intrusion events, helping you confirm that detectors trigger correctly, lock out false alarms, and initiate proper alarm annunciation in response to genuine glass break scenarios.
• Broad detector compatibility — Designed to work with Bosch DS1101i, DS1102i, DS1103i, and DS1108i Glass Break Detectors, the DS1110i enables a unified testing workflow across multiple devices in a single installation, ensuring consistent coverage and simplifying commissioning.
• Portable, ergonomic, field-ready design — This lightweight tester fits comfortably in one hand, allowing technicians to perform tests quickly in tight spaces or elevated mounting positions. Its rugged construction withstands daily use on job sites, while its compact footprint minimizes storage requirements in tool bags.
• Ready-to-use with included battery — The DS1110i ships with a 9 V alkaline battery, so you can start testing straight away without hunting for power sources. Battery replacement is straightforward, enabling rapid turnover between test cycles during commissioning or maintenance visits.
• Time-saving for installers and service teams — By enabling fast validation of detector responsiveness and coverage, this tester reduces service time, helps technicians document test results, and supports compliance with installation standards and warranty requirements.

Technical Details of Bosch Glassbreak Tester

Technical notes: Get this information from the specifications section of the product on ec.synnex.com using the product’s UPC or SKU as reference. The DS1110i Glassbreak Tester is a handheld, battery-powered device purposely designed to test Bosch glassbreak detectors. It supports testing of DS1101i, DS1102i, DS1103i, and DS1108i detectors, delivering repeatable signal cues to validate detector response. The tester ships with a 9 V alkaline battery (supplied) and is built to withstand field conditions encountered by installers working on commercial and residential security systems. For exact numerical specifications (dimensions, weight, battery life, operating temperature, and other specs), please refer to the ec.synnex product page and corresponding documentation using the UPC/SKU reference.

how to install Bosch Glassbreak Tester

Note: The DS1110i is used to test detectors rather than install them. Follow these practical steps to perform a quick, safe, and reliable glassbreak test on Bosch DS1101i/DS1102i/DS1103i/DS1108i detectors:

Step 1 — Prepare and power the tester: Ensure the included 9 V alkaline battery is properly installed in the DS1110i. Inspect the battery contacts for corrosion and make sure the battery is seated firmly. Power on the device according to the user manual and verify that the indicator, if present, shows a ready or test mode status.

Step 2 — Assess the testing environment: Before you test, confirm that the glassbreak detector is mounted in its typical glazing area and that any security system components connected to the detector are in their standard operating state. Clear the area of obstructions that could affect signal propagation and ensure that the detector’s sensitivity settings align with the project’s commissioning plan.

Step 3 — Align and aim: Hold the DS1110i at a typical testing distance from the glassbreak detector, and align the tester with the detector’s field of view. Maintain a steady, controlled posture to ensure consistent energy delivery during the test. Avoid pointing at reflective surfaces that could distort the signal.

Step 4 — Trigger a test signal: Activate the tester’s test mechanism to generate the glassbreak cue. This should produce a controlled signal that the detector should recognize as an intrusion event. Observe the detector’s response—whether it initiates an alarm, triggers a notification, or switches into the appropriate response mode per your system configuration.

Step 5 — Document results and adjust if needed: Record detector response, time-to-alarm, and any annunciation events. If a detector does not respond as expected, re-check mounting, sensitivity settings, and power status. If required, repeat the test at different angles or distances to validate full coverage of the glazing area. After testing, power down or reset the tester as recommended and store it in a protective case to preserve its condition for the next field session.

Step 6 — Battery care and storage: When the testing is complete, remove or replace the battery if suggested by the manufacturer’s guidelines. Store the DS1110i in a cool, dry place away from moisture and extreme temperatures to maintain battery integrity and ensure readiness for future tests.

Frequently asked questions

• Q: Which detectors can I test with the DS1110i? A: The DS1110i is designed to test Bosch DS1101i, DS1102i, DS1103i, and DS1108i Glass Break Detectors, providing a standardized testing workflow across these models.
• Q: What power source does the DS1110i use? A: It is powered by a 9 V alkaline battery, which is supplied with the unit, delivering reliable performance for field testing.
• Q: Is the DS1110i easy to use for field technicians? A: Yes. The device is intended to be compact and simple to operate, enabling quick on-site tests with minimal disruption to ongoing security operations.
• Q: Can I use the DS1110i for routine maintenance and compliance checks? A: Absolutely. Regular testing with the DS1110i helps validate detector responsiveness, confirm glazing coverage, and support compliance with installation standards and service-level expectations.
• Q: Where can I verify the exact technical specs? A: Refer to the official product specifications on ec.synnex.com and locate the DS1110i using the product's UPC or SKU to access the most precise data.