Monoprice VGA/UXGA CAT5/RJ45 100 Meters Extender Kit - Balun

Extend high-quality VGA/UXGA video signals beyond the typical cable length with the Monoprice VGA/UXGA CAT5/RJ45 100 Meters Extender Kit - Balun. Designed to work over standard CAT5/CAT5e networks, this two-piece extender delivers reliable image performance across long distances, making it an ideal solution for classrooms, conference rooms, digital signage, and control rooms. By leveraging built-in equalization and a simple transmitter-receiver setup, you can repurpose existing cable infrastructure to distribute video where it’s needed most, without compromising on clarity or ease of installation. Whether you’re wiring a single presentation room or outfitting multiple display zones, this kit offers a cost-effective, flexible approach to extend VGA and UXGA signals across substantial distances.

• Distance-focused design: extend VGA/UXGA video signals up to 100 meters (330 feet) over a single CAT5/RJ45 run, enabling flexible placement of displays, projectors, and kiosks without the need for new dedicated video cables.
• High-resolution support across distances: up to 1600x1200 at 60 Hz for runs up to 50 meters, and up to 1024x768 at 60 Hz for the full 100-meter range, ensuring clear, readable visuals for presentations, training, and signage.
• Signal integrity with built-in equalization: compensates for cable loss and attenuation, helping maintain sharp images, reliable color rendering, and stable synchronization over long cable runs.
• Two-piece transmitter and receiver kit: includes both transmitter and receiver, using standard RJ45 cabling for the link—no specialized cables required, enabling quick setup and easy relocation if needed.
• Versatile, budget-friendly extension: leverages existing CAT5 infrastructure to distribute video across rooms or zones, reducing the need for expensive fiber solutions or bespoke cabling projects.

Technical Details of Monoprice VGA/UXGA CAT5/RJ45 100 Meters Extender Kit - Balun

• Maximum distance: 100 meters (330 feet) over CAT5/RJ45 cable
• Resolution support: 1600x1200 at 60 Hz up to 50 meters; 1024x768 at 60 Hz up to 100 meters
• Cable and link: standard CAT5/CAT5e RJ45 link between transmitter and receiver
• Kit contents: transmitter and receiver included
• Signal processing: built-in equalization to maintain image quality over long cable runs
• Connectors: RJ45 ports for the CAT5 link; VGA/video path handled by the extender pair, facilitating a straightforward setup

How to Install Monoprice VGA/UXGA CAT5/RJ45 100 Meters Extender Kit - Balun

To achieve a reliable long-distance VGA extension, follow these practical steps. The goal is a clean, stable link that preserves image quality from source to display across the CAT5 run.

• Prepare the source and display locations: Identify the video source (computer, media player, or switch) and the display destination (monitor or projector). Ensure both devices can support the target resolutions within the specified ranges.
• Connect the transmitter to the source: Attach the source device’s VGA output to the transmitter’s input and confirm that the transmitter is powered if required by your model. Set the source to the intended resolution (preferably one of the supported values for the chosen distance).
• Run the CAT5 link to the display location: Use a single CAT5/CAT5e cable to connect the transmitter’s RJ45 output to the receiver’s RJ45 input. Keep the run as direct as possible, avoiding sharp bends or kinks to preserve signal integrity.
• Place the receiver near the display: Position the receiver close to the display device. Connect the receiver’s output to the display input, following the display’s input configuration requirements. Power the receiver if needed by your setup.
• Power up and verify: Power on both units and the connected devices. Confirm that the display shows the correct image and adjust the resolution or refresh rate as necessary to match the supported settings for the distance.
• Troubleshoot for optimal quality: If the image shows artifacts, flicker, or color distortion, recheck cable connections, ensure RJ45 connectors are fully seated, and consider shortening the CAT5 path if issues persist. For the best results, keep the CAT5 run as short as feasible within the required distance limits and avoid interference sources along the cable path.

Frequently asked questions

Q: What is the maximum distance supported by this extender?
A: The extender supports up to 100 meters (330 feet) over a CAT5/RJ45 link, enabling flexible layout for large rooms and multi-zone setups.

Q: Which resolutions are supported, and how do they vary with distance?
A: At up to 50 meters, the system supports up to 1600x1200 at 60 Hz. At the full 100-meter distance, it supports up to 1024x768 at 60 Hz. These specifications help you plan the appropriate display size and placement based on your cable length.

Q: What type of cables are required?
A: A standard CAT5 or CAT5e RJ45 cable is used to connect the transmitter and receiver. This makes it easy to leverage existing cable runs without special cabling.

Q: What is included in the package?
A: The package includes both a transmitter and a receiver, forming a complete two-piece VGA/UXGA extender kit designed to work together to extend video signals over CAT5.

Q: Do I need external power for the extender?
A: Specific power requirements are not detailed in the provided product information. In many setups, the transmitter and receiver may require power, but you should verify the power options for your exact unit and provide the appropriate power adapters or connections as needed to ensure stable operation.