SKU: 73473900130

Shure SLXD35-H55 Digital Camera-Mount Wireless Plug-On Transmitter System (H55: 514 to 558 MHz)

Sale price$472.05 Regular price$524.50
Save 10%

Pay in installments of $131.12 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 30 - Sep 4

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Shure SLXD35-H55 Digital Camera-Mount Wireless Plug-On Transmitter System (H55: 514 to 558 MHz)The Shure SLXD35 offers videographers, journalists, documentary makers, and content producers a reliable wireless plug on transmitter system that delivers crystal clear digital sound quality while also being quick and easy to set up, even if you're using multiple mics on set. Built around a rugged, single channel receiver that can be camera mounted or used in an audio bag, the system offers a comprehensive feature set that ensures professional

The Shure SLXD35 offers videographers, journalists, documentary makers, and content producers a reliable wireless plug-on transmitter system that delivers crystal-clear digital sound quality while also being quick and easy to set up, even if you're using multiple mics on set. Built around a rugged, single-channel receiver that can be camera-mounted or used in an audio bag, the system offers a comprehensive feature set that ensures professional-sounding, broadcast-ready results for demanding news gatherers and creators. This configuration includes a handheld plug-on transmitter with a locking connector that will accommodate any XLR microphone of your choice (available separately).
Transparent Digital Sound, Dependable Performance, and Multi-Mic Mode
  • The SLX-D delivers 24-bit digital audio with a fast transient response, a 20 Hz to 20 kHz frequency response, and a 118 dB dynamic range, resulting in clear, accurate sound.
  • Operating far away from potential Wi-Fi interference in the 2.4 GHz band, this configuration of the system transmits in the H55: 514 to 558 MHz UHF band, with a 44 MHz tuning range and 1760 frequencies it can autoscan to ensure a clean wireless signal.
  • Digital Predictive Switching Diversity uses a microprocessor to switch between the two antennas before dropouts occur.
  • A low latency of 3.2 ms helps ensure your sound and picture are easy to properly sync.
  • The SLX-D's spectrum-efficient digital transmission technology allows for up to 32 mics to be used at once.
  • Great for shoots with several cameras and microphones, Multi-Mic Mode lets you scan and create a list of clean frequencies, which you can send to multiple receivers via IR.
  • Each receiver will sync to the appropriate transmitter at the touch of a button; settings on the transmitters like the input gain and high-pass filter are also recalled.
  • Multi-Mic Mode makes channel allocation easier and more efficient since the receivers aren’t all auto scanning and competing for open frequencies.
Plug-On Transmitter
  • This configuration includes the SLXD3 plug-on transmitter with a secure, twist-locking XLR connector to accommodate a huge variety of microphone options, including handhelds and shotguns (available separately).
  • The transmitter offers 12 and 48V phantom power options for condenser microphones.
  • The SLXD3 features a -12 dB pad for use on loud sources and a +12 dB boost option for use on low-level sources.
  • Use the mic offset gain function to fine-tune the input gain and ensure multiple mics are at similar volume levels.
  • Engage the 150 Hz high-pass filter to reduce distracting, unwanted low-end for clearer speech.
  • The rugged, all-metal transmitter features an OLED screen that shows essential information and includes a leather case with a belt clip.
  • The system provides a transmission range up to 330'. A selectable 1/10/30mW RF output allows you to increase the transmission power to maximize the distance or to overcome interference, if necessary.
  • Two AA batteries or an SB903 rechargeable battery (available separately) will power the unit for up to 8 hours.
Rugged Receiver Ready for Camera or Audio Bag
  • Powerful and portable, the SLXD5 is a single-channel digital wireless receiver for on-camera cold shoe mounting and audio bag use featuring user-configurable front-panel controls and a bright OLED screen for key system function readouts and remaining battery life.
  • Housed in a tough metal chassis with adjustable front-mounted antennas, the SLXD5 is a great fit for on-the-go shooting rigs.
  • It offers adjustable gain control and dual 3.5mm outputs including a headphone monitor out and switchable line/mic output. Additional features include automatic frequency scanning and IR sync to easily link the transmitter and receiver to the same frequency.
  • Two AA batteries or an SB903 rechargeable battery (available separately) will power the unit for up to 5.5 hours.
Optional Rechargeable Battery Management
  • Adding the SB903 lithium-ion rechargeable battery, along with an SBC10-903 single charger, SBC203 dual-docking charger, or SBC80-903 8-bay charger offers a cost-effective and environmentally friendly alternative to throwing away AA batteries (batteries and chargers available separately).
  • Using the SB903 battery and SBC203 charger simplifies the task of keeping multiple transmitters charged and ready—you can even recharge the battery while still in the transmitter or receiver.
  • When powered by an SB903, the transmitter and receiver both display the remaining battery life in hours and minutes.
  • For bag use, the SBC-DC-903 battery eliminator (available separately) allows you to power the receiver from your mixer's battery.
  • USB-C ports on the transmitter and receiver allow for battery recharging and direct powering.
A Variety of Mics and Transmitters Available
Shure offers numerous lavalier, headset, and handheld microphone options to adapt your SLX-D system as your needs evolve.
  • The SLXD3 works with just about any XLR microphone on the market including Shure's VP64A and SM63L handheld mics as well as the VP89 shotgun.
  • The SLXD1 is a rugged bodypack transmitter featuring a TA4M connector to accommodate a wide range of lavalier and headset mic options.
  • The WL183 omnidirectional lavalier mic offers consistent pickup, even when the talent turns away from the mic.
  • The WL185 cardioid lavalier mic provides a directional pickup pattern for less background sound.
  • The WL184 supercardioid lavalier mic offers a very narrow, feedback-resistant pickup pattern for louder events.
  • The discrete UL4 UniPlex subminiature cardioid lav provides directional pickup, exceptional clarity, and a discreet, low-profile appearance.
  • If you need a waterproof option, the DL4 DuraPlex miniature lavalier features an IP57 rating for water and dust resistance. Its forgiving omnidirectional microphone capsule delivers a clear, transparent, full-range sound.
  • The SLXD2 handheld transmitter is available with several mic capsules choices for presenters who prefer the flexibility of a handheld microphone.

Specifications

System
Wireless Technology
Digital UHF
Number of RF Channel Frequencies
1760
Included Transmitters
1 x Plug-On
Diversity
True Digital Diversity
RF Frequency Band
H55: 514 to 558 MHz
RF Bandwidth
44 MHz
Frequency Step Size
25 kHz
RF Channel Scanning
Auto-Scan
Max Operating Range
328' / 100 m
Max Transmitters per Band
32
Built-In Recorder
No
Timecode Support
Yes
Mobile App Compatible
No
Sample Rate/Resolution
24-Bit
Latency
3.2 ms
Dynamic Range
118 dBA (Typical)
Encryption
No
THD
<0.02 %
Receiver
Receiver Type
Camera-Mount
Mounting Options
Shoe-Mount (with Included Hardware)
Antenna
2 x 1/4 Wave Flexible Whip, Fixed (Front-Mount)
Number of Audio Channels
1
Audio I/O
1 x 1/8" / 3.5 mm TRS Female Balanced Mic/Line Output
1 x 1/8" / 3.5 mm TRS Female Unbalanced Headphone Output
Gain Range
0 to +12 dB (3 dB Steps)
Pad
12 dB
Audio Output Level
1/8" / 3.5 mm Output:
+15 dB (Line Level, Balanced)
Phantom Power Protection
No
Frequency Response
20 Hz to 20 kHz +1/-2 dB (Dependent on Mic)
Network I/O
No
USB/Lightning Connectivity
1 x USB-C Female (Bus Power, Charging)
USB Class-Compliant
No, USB Charging/Power Only
Standalone Audio Interface Capable
No
Impedance
1/8" / 3.5 mm Output:
450 Ohms (Balanced)
Approximate RF Sensitivity
-97 dBm
Spurious
Rejection: >75 dB
Power Requirements
Battery, Bus Power (USB)
Battery Type
2 x AA (Included)
1 x Shure SB903 (Not Included)
Approx. Battery Life
5.5 Hours
Display & Indicators
OLED (AF Level, Battery Status, Channel, Frequency, Group, Menu Navigation, Metering, Multifunction, Output Level, RF Level, Sync, Transmitter Battery Status)
Housing
Aluminum
Operating Temperature
0 to 122°F / -17 to 50°C
Storage Temperature
-20 to 165°F / -28 to 73°C
Dimensions
2.7 x 4.2 x 1" / 68 x 107 x 25.3 mm
Weight
0.4 lb / 182 g
Transmitter
Transmitter Type
Plug-On
RF Output Power
1 / 10 / 30 mW
Audio I/O
1 x XLR 3-Pin Male Balanced Input (Locking)
Included Cable Connector
No
Phantom Power
+12 V
+48 V
Muting
Off/On Switch
Audio Input Level
+20.5 to -3.5 dBV
Auto-Level Control
No
Gain Range
0 +21 dB
Signal Processing
No
Frequency Response
20 Hz to 20 kHz (Dependent on Mic)
Sync Method
IR
Antenna
Internal
Power Requirements
Battery
Battery Type
2 x AA (Included)
1 x Shure SB903 (Not Included)
Battery Charging Time
1.25 to 5.5 Hours
Approx. Battery Life
8 Hours (Lithium Shure SB903)
USB/Lightning I/O
No
Display & Indicators
OLED (Battery Status, Channel, Group)
Housing
Metal
Operating Temperature
0 to 122°F / -17 to 50°C
Storage Temperature
-20 to 165°F / -28 to 73°C
Dimensions
1.6 x 5 x 1.6" / 41 x 126 x 41 mm
Weight
7.1 oz / 200 g
Packaging Info
Package Weight
2.53 lb
Box Dimensions (LxWxH)
16.3 x 8.2 x 3.7"
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 73473900130

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 25 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
D
DadoMultimedia
Fort Morgan, US
★★★★★ 3
Es una buen cargador inalámbrico, pero su mal ensamblaje hizo que no funcionara al inicio.
Color: Best Dad-brown, Color: Best Dad-brown
Estaba bastante emocionado de tener éste cargador inalámbrico para mi celular. Me gustó mucho el diseño de la bandeja hecho en piel. (según la descripción) Lamentablemente, no funcionó con mi celular, tengo un iPhone 12 pro max, que funciona perfectamente si lo cargo con cualquier otro cargador inalámbrico, pero con éste cargador no funcionó, simplemente se quedaba la luz led en color azul parpadeando. Y según las instrucciones es porque no está bien acomodado en la bandeja ó que está protegiéndose de un sobre-calentamiento, pero nada que ver con ello, ya que lo estuve probando acomodándolo de distintas maneras y comparándolo al mismo tiempo con otro cargador donde sí funcionaba mi celular sin problemas. Cabe mencionar que las pruebas fueron hechas sin tener ningún estuche protector en el celular que pudiese interferir con la conexión inalámbrica del cargador. Simplemente éste cargador no estaba funcionando. Quedé desilusionado, ya que ére era el propósito de tener éste cargador, ya que usar sólo la bandeja, el precio por éste producto sería exageradamente alto. Bandeja y cargador es una buena idea, pero la bandeja sin un cargador que no funcione, no tiene caso. En el último momento decidí abrir (soy técnico en electrónica) para revisar porque no estaba funcionando, y descubrí que la bobina que funge como imán, estaba despegada de donde debería estar posicionada por causa de un mal ensamblaje. Así que simplemente la coloqué en el lugar que debería de ir añadiendo un poco de pegamento para reforzar que no se vuelva a despegar. Hice prueba nuevamente, y el celular ésta vez fue detectado sin problemas y cargando. En conclusión, la idea de ésta bandeja con el cargador es muy buena, el producto es muy bueno en cuanto a la calidad de la piel, lamentablemente un mal ensamblaje termina haciendo que demerite la calidad del producto. Iba a dar 2 estrellas, sin embargo, al encontrar la falla, subo a 3 estrellas, ya que el producto en si es bueno, pero el mal ensamble, como mencioné, le resta mucho, ya que podría haber llevado a que éste producto ya fuera inútil.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 29, 2024
T
Tiffany Detweiler
Birmingham, US
★★★★★ 5
Beautiful
Color: Best Dad-brown
I got this for my husband for Father’s Day and I know he’s going to love it! It’s very simple with a beautiful colored leather, great stitch/leather quality, a hearty quote with a cute design, and perfect size for what is usually kept at the bedside.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 9, 2025
B
Billy Bonds
Los Angeles, US
★★★★★ 5
Good looking and the wireless charging works great
Color: Best Dad-brown
I have a confession to make, I(a dad) bought this for myself. I was looking for something to keep on the night stand next tot he bed without getting to big. I only wanted something to charge my phone and put the tv remotes in, I have no interest in keeping my keys, watch or spare change in reach of our younger children....most of the other options I found were much bigger for all those purposes. This one is well made, looks great, and the wireless charger is very easy with my iphone, even while in its case. I dont even need to center it in the charging pad, which was my only fear. I can lay my phone anywhere in there and it charges flawlessly. If you are looking for a gift for your dad, I would not hesitate.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 28, 2024
P
Patrick Roggie
Port Orchard, US
★★★★★ 5
Charger works great, tray is solid
Color: Best Dad-brown, Color: Best Dad-brown
I've only used wireless chargers in passing before, and always had issues with them consistently 'activating.' I've had no issues with this one at all, the tray makes it very easy to line it up. Slide the phone all the way into the groove and it's charged flawlessly for me. My phone does have a case, though it's not a very thick one like an otterbox, which I imagine would make the charging more inconsistent. The tray as a whole is very solidly built and well made, it is listed as 'vegan leather' so I'm assuming it's not actual leather, but you honestly can't tell the difference. My biggest complaint is how cheesy the saying on the tray is (even though I am a dad), but that is well worth putting up with for how nice the tray is.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 10, 2024
P
Pronounce
Waukegan, US
★★★★★ 4
Not bad, but charger didn't work with my phone
Color: Best Dad-brown
I have several organizing trays on my desk (basic, nothing as nice as this box), and so I thought to reduce the clutter on my desk further by incorporating my QI charger with an organizer tray. Unfortunately the QI charger in the organizer wouldn't link up to the QI charging coils of my phone. Whereas the organizer's charger did work with my wife's S24 Ultra, and my phone has been working on a separate QI charger. The whole point in spending this much money on this organizer is for the QI charger. Without the charger working it's just too expensive as an organizer. Yes, it has a leather look to it, but even with that finish I'd say $25 max would be all I'd be willing to pay for such an organizer. So this a cautionary point. If you give this as a gift it may not work with the recipients phone.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 22, 2024

recommand products