Intel X710DA2OCPV3G1P 10Gigabit Ethernet Adapter

Designed for data centers, enterprise networks, and high-performance server environments, the Intel X710DA2OCPV3G1P 10 Gigabit Ethernet Adapter delivers scalable, low-latency fiber connectivity in a dense, OCP 3.0-compliant package. This dual-port SFP+ plug-in card is built around the proven Intel X710 controller, offering robust throughput, virtualization support, and flexible 10 Gigabit options through 10GBase-SR and 10GBase-LR fiber standards. Its OCP 3.0 bracket height makes it an ideal choice for rack-dense deployments and blade servers, while PCIe 3.0 x8 provides ample bandwidth for data-intensive workloads such as virtualization, storage, and high-speed interconnects. Whether expanding a virtualized environment, upgrading a data center spine, or provisioning a rapid, scalable network edge, this adapter brings reliable performance and future-ready capabilities to your infrastructure.

• Dual-port 10GbE SFP+ adapter: This two-port card enables simultaneous high-speed connections, supporting independent links or aggregated throughput for workloads that demand more bandwidth, improved redundancy, and flexible network design.
• Fiber-optic versatility with SFP+ flexibility: Each port supports 10GBase-SR (short-range multimode) and 10GBase-LR (long-range single-mode) operation when paired with the appropriate SFP+ transceivers, delivering flexible deployment across campus, data center, and long-haul links.
• OCP 3.0 bracket height for dense deployments: Engineered to fit in OCP 3.0 compliant servers, this card maximizes rack density while preserving performance. Its form factor simplifies installation in blade enclosures and high-density servers without compromising airflow or reliability.
• Intel X710 performance with rich offloads: Powered by the Intel X710 family, the adapter provides excellent throughput with offloads for virtualization, RSS, VLAN, and large send/receive operations. This results in lower CPU utilization, better scalability for multi-tenant environments, and improved efficiency for virtual machines and containers.
• Easy deployment and broad OS compatibility: The card is designed for straightforward installation in supported servers, with driver and software support across major Windows and Linux distributions. Intel’s management utilities help monitor link status, offloads, and performance tuning for optimum operation.

Technical Details of Intel X710DA2OCPV3G1P 10Gigabit Ethernet Adapter

• Chipset: Intel X710 dual-port 10 Gigabit Ethernet controller
• Form factor: OCP 3.0 bracket height (low-profile option available)
• Ports: 2 x SFP+ optical fiber interfaces
• Standards supported: 10GBase-SR, 10GBase-LR
• Interface: PCIe 3.0 x8
• Data rate: 2 x 10 Gbps (theoretical aggregate up to 20 Gbps)
• Transceivers: SFP+ modules required (sold separately) for SR/LR operation
• Software/driver support: Broad driver support for Windows and Linux; includes Intel Ethernet driver and management utilities

how to install Intel X710DA2OCPV3G1P

• Power down the server and disconnect it from power. Ensure you are grounded to prevent static discharge before handling the card.
• Verify server compatibility with OCP 3.0 and the available slot or backplane; ensure adequate airflow and clearance for the dual-port module.
• Insert the Intel X710DA2OCPV3G1P into the appropriate OCP 3.0 slot or PCIe slot as specified by your server model, then secure the card with the mounting hardware provided by the chassis.
• Install the required SFP+ transceiver modules for your deployment (10GBase-SR for multimode, or 10GBase-LR for single-mode); connect fiber links as needed.
• Power on the server, install the correct Intel Ethernet drivers and management utilities for your operating system, and verify link status, speed, and duplex settings. Run a basic throughput test to confirm 10 GbE operation between endpoints.

Frequently asked questions

• Is this adapter dual-port? Yes. The Intel X710DA2OCPV3G1P provides two independent 10 GbE SFP+ ports, suitable for link aggregation, redundancy, or independent network paths.
• What type of transceivers do I need? You will need compatible SFP+ transceivers to enable 10GBase-SR or 10GBase-LR operation. SR is typically used with multimode fiber for shorter distances, while LR supports longer distances with single-mode fiber. Transceivers are sold separately.
• Is the card compatible with my server? The card is designed for OCP 3.0 compliant servers and other systems that support the X710 family. Check your server’s motherboard or backplane documentation for OCP 3.0 compatibility and available PCIe or OCP slots before purchasing.
• Does it support virtualization features? Yes. The Intel X710 family includes virtualization-offload features such as SR-IOV and RSS, helping improve performance in virtualized environments and multi-tenant workloads.
• Which operating systems are supported? Intel provides drivers and utilities for a broad range of Windows and Linux distributions. Ensure you download the latest Intel Ethernet drivers from the official sources and follow OS-specific installation steps for optimal performance.