Pay in installments of $292.75 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 22 - Jul 27
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
HDZero Whoop V2 VTX HDZ3103The HDZero Whoop V2 VTX is the evolution of the Whoop Lite VTX, designed for pilots who want the same HDZero performance, but with improved durability, reliability, and ease of installation. Supporting all HDZero MIPI cameras, including 540p90 , 720p60, and 1080p30 modes, the Whoop V2 delivers up to 200 mW of clean, low latency HD video over 5. 8 GHz. A thicker PCB provides greater impact resistance (addressing a common failure point of the Whoop
The HDZero Whoop V2 VTX is the evolution of the Whoop Lite VTX, designed for pilots who want the same HDZero performance, but with improved durability, reliability, and ease of installation.
Supporting all HDZero MIPI cameras, including 540p90 , 720p60, and 1080p30 modes, the Whoop V2 delivers up to 200 mW of clean, low-latency HD video over 5.8 GHz.
A thicker PCB provides greater impact resistance (addressing a common failure point of the Whoop Lite), a factory-soldered wire harness with Betaflight standard digital VTX plug simplifies installation, and a brass antenna retention bar keeps the U.FL connector secure through crashes and vibration.
With its compact 31 × 31 mm footprint and 25.5 × 25.5 mm mounting pattern, the Whoop V2 fits everything from 80 mm whoops to 4-inch micro drones. For ultralight builds, our HDZero AIO boards combine FC + VTX with an AHD camera interface to save both weight and space.
Power input range: 3 – 12.6 V (1S – 3S)
Note
- No reverse-polarity protection — incorrect wiring will permanently damage the unit.
- Ensure ≥ 1.5 A available current when powered from a 5 V pad.
- Direct 1 S power may dip below 3 V on throttle punch-outs, causing video loss.
- External capacitor recommended for 3S setups.
Includes M2 rubber grommets and a brass antenna bar for secure mounting. For high-speed racing, consider the HDZero Race V3 VTX which has a more common 20 x 20 mm mounting pattern for 5in builds.
Specifications
- General
- Supports all HDZero MIPI cameras
- Video resolutions: 720p60, 540p90, 1080p30
- RF output power: 25 mW / 200 mW
- Frequency range: 5.725 – 5.850 GHz
- Hardware & Build
- Secured U.FL connector with brass retention bar
- MIPI video connector
- Thicker PCB for better durability and impact resistance
- Pre-soldered wire harness (easy installation)
- Board thickness: ~1.6 mm
- No antenna included
- Size & Mounting
- Size: 31 × 31 mm (29 × 29 mm inner)
- Mounting pattern: 25.5 × 25.5 mm (M2)
- Weight: 5.4 g
- Power & Control
- Input voltage: 3 – 12.6 V (1S – 3S)
- Consumption: 5 – 6 W
- Supports MSP OSD and Smart Audio
Comparison
| V2 | Lite | |
| RF Connector | Secured U.FL + brass retention bar | Standard U.FL (no retention bar) |
| Durability | Thicker PCB, more impact-resistant | Thinner PCB, more prone to damage |
| Wiring/Installation | Pre-soldered wire harness | Requires manual soldering |
| Size | 31 × 31 mm (29 × 29 inner) | 32.5 × 32.5 mm (29 × 29 inner) |
| Mounting Pattern | 25.5 × 25.5 mm (M2) | Same pattern |
| Weight | 5.4 g | 4.5 g (lighter) |
| Board Thickness | ~1.6 mm | ~1.2 mm (no shielding) |
| Recommended Use | 80 mm whoops up to 4″ micro drones | 65–85 mm whoops |
Includes
- 1x HDZero Whoop V2 VTX
- 5x Power/Uart Cable
- 2x Zip ties
- 4x Rubber Grommet (M3 to M2)
- 3x u.FL Antenna Retention Screws
- 1x Metal bar
Browse more
- Browse all HDZero
- Browse all Shark Byte
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 15 reviews
Sort
Product Reviews
★★★★★ 5
Great room divider
Color: Black, Size: 4 Panel-88'', Color: Black, Size: 4 Panel-88''
This is a room divider and would work great as one! I’m using it as a cover for my car port/garage so you can’t look in and see my messy garage as easily and for what I’m using it for it’s a little not quite as sturdy as I need it to but I’m sure it’s not meant to be used outside anyways so I don’t fault the product since I’m not using it as intended… with that said though…. It still covers my garage beautifully and really does exactly what a I need it to! I’m sure the wind may blow it over if it gets too crazy but I don’t see it breaking by any means. The frame is metal and drilled together using long screws. It’s very well built. The cloth for the panels is this waterproof type material that’s kind of like the gazebo roof feeling. So it’s easy to clean and it’s easy to wipe. You can put it straight or bend the panels and either way it still stands up. You don’t HAVE to bend it to make it stand or anything. You can literally use it straight across like I am in the pictures. Overall very happy with this product and it’s also very tall so it truly covers a lot (hides a lot lol). I’m 5’8 so you can see it’s taller than me by the pic I took
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
★★★★★ 3
OK. Drag to setup. Needs more stable feet
Color: Black, Size: 4 Panel-88''
I was glad to find these.
The benefits of having them in a recording setup is helping suppressing noise for a vocal booth.
It's a layer that surrounds the recording box. Nice!
(But away from audio hardware or DAW).
Here is the not so nice part:
The feet!
It's able to stand (as it needs to do this). But it cannot be bumped. If it does, it's coming down onto something.
I believe the feet units are not wide enough (or long enough). That makes for an easier tumble risk. So far, they haven't, but it's like being in the woods over leaves - it feels dangerous with every step! (That's actually true).
They are tall enough, wide enough, material OK. But the feet for the main assembly do not seem sturdy enough.
There are ways to help that.
I'm thinking a 2x4 to augment the base. Make them wider. It can be done. It was a drag to set these up, and I'm sure to modify them like i'd want them. But, they do come in at a much lower price that other similar dividers.
Consider all this because I've seen more solid dividers ( with padding) that would basically be the 1/2 cost of these. But i'd think they'd be easier to assemble, stand sturdier, and without that feeling of an impending fall (or fail).
This is my opinion. I hope it helps.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 1
wrong size of metal components. incorrect items. non functioning
Color: Black, Size: 4 Panel-88''
The owner of this product sent me the incorrect pieces when I tried to install. It didn’t fit. The pieces were missing holes and once I connected the wrong pieces after knowing now they’re stuck and I can’t return them even though Amazon was kind enough to refund me. I just want to warn people this product is such a disappointment because it looks good. It’s good price, but you can’t even assemble the thing very disappointed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 31, 2026
★★★★★ 4
Sturdy Folding Room Divider with Good Privacy Coverage and Modern Look
Color: Black, Size: 4 Panel-88''
I picked this room divider up to help separate space in a room without needing permanent walls, and overall it works very well for creating privacy while still looking clean and modern.
The size is one of the biggest advantages. At 6 feet tall and roughly 88 inches wide, it creates a noticeable visual separation and works well for apartments, dorms, offices, studios, shared rooms, or content creation setups where you want to hide clutter or define different areas.
The black fabric and frame design give it a simple modern appearance that blends easily into most spaces without looking overly decorative or outdated. It has a clean minimalist look that works especially well in offices, bedrooms, gaming rooms, or studio environments.
Assembly was fairly straightforward overall. Once fully put together, the divider feels reasonably stable for normal indoor use. The folding panel design also makes it flexible enough to angle different ways depending on the room layout.
The portability is another strong point. Since it folds down, it is much easier to move or reposition compared to permanent partitions or heavier wooden dividers. That makes it practical for temporary privacy setups or changing room layouts frequently.
Privacy performance is solid visually. It blocks sightlines well enough for changing areas, workspaces, video backgrounds, or separating sections of a room. The fabric also softens the space slightly instead of feeling harsh or industrial.
One thing worth noting is that while it provides visual privacy, it is not soundproof. It helps define space and reduce some openness, but conversations and noise will still pass through normally.
The material quality feels decent for the price range. The frame is lightweight but functional, though I would still avoid rough handling or constant aggressive repositioning over time.
Value for money is good considering the size, flexibility, and convenience. Similar room dividers can become expensive quickly, especially for taller multi-panel setups.
Overall, this is best for anyone needing an affordable flexible way to create separation and privacy in shared or open spaces. It works especially well for apartments, dorms, offices, studios, remote work setups, or content creators wanting a cleaner background without permanent construction.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
★★★★★ 5
Looks nice but it's not very stylish, works as intended, happy with purchase
Color: Black, Size: 4 Panel-88''
This 6 ft room divider is exactly what I needed and works great! It was very easy to set up and took only a few minutes to assemble. I was pleasantly surprised by how lightweight it is, and it folds up easily for storage when not in use.
The fabric-style panels look nice and provide good privacy, and the included clips help keep everything neatly in place. It’s a simple but effective design that does what it’s supposed to do.
Because it’s lightweight, it may need a bit of extra support depending on where you place it—I used small weights on the base, and that completely solved the stability issue.
Overall, I’m very happy with this purchase. It’s practical, easy to use, and a great value for the price. I would definitely recommend it! Industrial
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 22, 2026