SKU: 39816378038

Carli 3" Backcountry Suspension System 14-25 Ram 2500 6.7L Cummins

Sale price$2176.20 Regular price$2418.00
Save 10%

Pay in installments of $604.50 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 19 - Jul 24

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Carli 3" Backcountry Suspension System 14-25 Ram 2500 6.7L CumminsThe Carli Backcountry system can best be described as being built for truck owners that "use their truck as a truck." So, what does this mean? Basically, the Backcountry is ideal for those that daily drive, tow, plus like to hit some trails on the weekends, but aren't looking to see daylight under the tires out in the dunes. The benefit of the Backcountry over the Commuter series is the remote reservoir that not only LOOKS cool, but also allows the

The Carli Backcountry system can best be described as being built for truck owners that "use their truck as a truck." So, what does this mean? Basically, the Backcountry is ideal for those that daily drive, tow, plus like to hit some trails on the weekends, but aren't looking to see daylight under the tires out in the dunes. The benefit of the Backcountry over the Commuter series is the remote reservoir that not only LOOKS cool, but also allows the shock to maintain its temperature, meaning you won't experience shock fade when on rough surfaces for any extended period, as a traditional IFP shock will tend to do.

CARLI BACKCOUNTRY SUSPENSION SYSTEM COMPONENTS

The Backcountry 2.0 system is designed for people seeking the best ride on and off-road on a budget; perfect for those that want to have a little dirt-road fun in their 8,500lb truck without losing the on-road ride quality or usability for which the truck was designed. You're no longer limited to the highway while gravel roads become uninteresting as you can drive them at speed with one hand on the wheel. The remote reservoir Carli SPEC 2.0 boasts 6063 Aluminum construction, anodized body for corrosion resistance, 5/8″ hardened steel chrome plated shaft, full serviceability & rebuildability and are built with 1-peice bushings in the 6061 billet rod-ends. These shocks are spec’d with a premium 5WT oil to balance lubricity, consistent damping and the widest available range in temperature variation.

Your truck will sit 3”-3.5” higher in the front (cab configuration dependent) with 50% more suspension travel than the factory platform thanks to the taller, lighter rate coil springs. Carli offers two base kits separated ONLY by the rear coil springs with which they’re spec’d:

REAR COILS SPECIFICATIONS:
  • R1 coils: - 0.5″-1″ lift, reduced capacity soft-ride coils – Max 1,500lb. bed load.
  • R2 coils: - 2”-3” lift. These coils maintain the factory payload. Through Carli's testing (up to 2,500lbs), they spec them as a factory capacity spring capable of 800lbs constant payload (or more on lighter trucks) to level to 3.25″ front lift.

SWAY BAR OPTIONS

When pairing added down-travel with the taller ride height, the position of the factory, front sway bar will need to be altered as well. For this, you have two options; Billet Sway Bar Drop Brackets or the replacement Torsion Sway Bar. The Billet Drop Blocks shift the sway bar down and forward to ensure the factory end links cycle properly throughout the entire extended travel range. Carli's optional Torsion Sway Bar removes the entire factory sway bar assembly replacing it with a torsion bar supported by fabricated drop brackets and delrin bushings. Fabricated sway bar arms and dual 5/8" FK heim end links round off the package. This is the single best bang for the buck, ride-quality upgrade offered by Carli Suspension.

TORSION SWAY BAR SPECIFICATIONS:
  • Easily the best bang for the buck upgrade for ride quality
  • Allows frong suspensin to move freely without giving up control
  • Requires removal of electronic sway bar Power Wagons
  • Torsion Bar may be black or silver zinc depends on supply chain availability. NOT requestable
SWAY BAR DROP BRACKET SPECIFICATIONS:
  • In-house machined billet aluminum
  • Hard-anodized for corrosion resistance
  • Correct factory sway bar geometry
NO SWAY BAR OPTION NOTES:
  • Diesel Power Products and Carli strongly suggest the use of either options available. These options are designed to work flawlessly with the rest of your kit and, are the best way to go. However, we understand you may already have the necessary provisions and/or products to use with this kit so we give you the option to not include any sway bar drop or Torsion Sway Bar provisions.


ADJUSTABLE TRACK BAR

When lifting the front end of a straight-axle truck, the front axle is pulled off-center unless the proper linkages are addressed. Three inches of front lift equates to an axle shifted toward the driver's side 3/4" and, in the radius arm equipped Rams, lightened caster and slight rearward axle shift. This system includes an Adjustable Track Bar to push the axle back toward the passenger side and provide a stronger link with less deflection for the lifted application. Also included are Radius Arm Drop Brackets to recenter your caster adjustment and shift the axle forward to its new center of travel.

Everything is included to support flawless operation of all components. You will receive bump stop drops to ensure the shocks are cycling in their designed travel range as well as a rear track bar drop bracket minimizing the rear end "wag" associated with opposing track bar suspension designs.

WHEEL AND TIRE FITMENT

This system will fit up to a 37" tire when utilizing wheels that are no more than 9" wide with 5.75-6" of backspacing. A 12.5" wide should fit with no rubbing on the factory radius arm and only minor trimming required, while a 13.5" will require more trimming and slightly more offset to fit properly. 35" tires will fit with VERY minimal if any trimming. Carli recommends running an 18" diameter wheel for optimal ride quality (more rubber = better small bump compliance) on a 35"-37" E-rated tire running 45psi front, 40psi rear when unloaded. Carli Recommends an 18" Wheel, no more than 9" wide with 5.25-5.75" of Backspacing.  E-Rated 35" Tire Fitment is Recommended. Recommended unloaded Tire Pressure 45F/40R. 37" tires will fit with the above wheel specifications. Replacement radius arms are not required but will offer more clearance for those wanting to run smaller offsets.

IMPORTANT NOTES

  • RECOMMENDED CONFIGURATION: Carli Leveling Systems are Designed and Tested on Vehicles with 18" Wheels with 35", E-Rated Tires. Stock wheels and tires or running a larger wheel diameter will result in a stiffer ride.
  • FACTORY REAR AIR RIDE: This system is not intended for installation on factory rear air ride equipped Rams.

CARLI TESTING

After a great deal of test runs with various weights loaded in the bed of Carli test truck, it was quickly determined that the factory payload was nearly untouched, given all of the updates Carli had made to the rear of the truck.

What would a Carli kit be if it weren't getting absolutely filthy out in the dirt or getting the shocks up to temperature? In true form, Carli made absolutely sure the truck could also perform offroad by making numerous trips to the deserts of Barstow, El Cajon and Phoenix to really confirm how the new packages worked. The conclusion? These trucks can boogie just like the previous years!

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 39816378038

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 16 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
The Fingernail Reviewer
Chelsea, US
★★★★★ 4
Nuce find for the price
Number of Items: 6, Color: Black (6-pack), Size: Small
I purchased these t-shirts for my teenage son and they fit him perfectly, they are lighweight, good quality and they have not fadded after several washes. They are soft and dont irritate the skin.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 23, 2026
M
Verified Purchase
Mike
West Palm Beach, US
★★★★★ 5
Bought in multiple colors! Fantastic material
Size: X-Large, Color: Light Green, Size: X-Large, Color: Light Green
I ordered this button-up for an upcoming beach vacation, and I’m honestly so impressed with the quality and feel of it. Right out of the package, the material felt soft, breathable, and exactly what you want when you know you’ll be spending long hours in the sun and heat. It’s incredibly lightweight without feeling cheap or flimsy, which was one of my biggest concerns when ordering. What I really love is how well it helps keep you cool. The fabric allows for great airflow, so you don’t feel like you’re overheating or sweating through it like you might with heavier shirts. Even just trying it on, I could tell it’s going to be perfect for hot, humid weather. The fit is also spot-on—not too tight, not too baggy—giving it a clean, relaxed look that works great for both casual outings and slightly nicer dinners by the beach. Overall, this shirt checks all the boxes: comfortable, breathable, stylish, and ideal for vacation wear. Already grabbing a few more colors
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 12, 2026
M
Verified Purchase
MD Ochoa
Belleville, US
★★★★★ 5
Slim but comfortable sizing looks upscale, wrinkle free from the dryer
Size: Medium, Color: Denim Blue
This is a very nice upscale looking shirt. It has great styling that is not over-sized. My husband normally wears a medium or large depending on the cut/style. He got a medium in this size and it is a perfect, comfortable fit. It arrived with some creases in the material from being folded in the packaging but it came out beautifully from the dryer. I'm happy he has a casual but nice shirt to wear when he takes me out to dinner!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026
S
Verified Purchase
S&J
San Leandro, US
★★★★★ 5
Nice and comfy, light duty and feel great.
Size: X-Large, Color: Light Green
What they may lack in "durability" i.e. very light and thin = not going to last all that long, they make up for in fit [yes even for wide shoulders], comfort and style. If you want them to last, suggest a gentle cycle and just take ot easy on them. They are light, thin, and airy. Nice summer shirt.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 23, 2026
K
Verified Purchase
Keena's Kitchen Personal Chef Service
Cuba, US
★★★★★ 4
A true vacation find!
Size: Medium, Color: Light Green
Really nice choice. Got it for my husband and he really liked the style. I loved how it fit on him and the lightness of the fabric. Great for hot, sunny weathered days, or warm nights. A true vacation find. Both comfy and stylish. He would have preferred it be 100% cotton, but I think he didn't really mind after steaming it. He commented on the color too. A beautiful sage green!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 4, 2026

recommand products