Pay in installments of $40.12 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 4 - Aug 9
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
TRASK 1-1/4" V-Line Handlebar - Standard - ChromeFeatures Seamless DOM mild steel construction with black powder coat or chrome finish All bars are drilled for internal wiring and notched for TBW Made in the U. S. A. Specs Product Name Handlebar Color Finish Chrome Base Color Silver Finish Chrome Features Notched for Throttle By Wire Pre Drilled Type Bend Buckhorn V Line Standard Rise 6 1 2" Width 35 1 2" Center Width 7 1 2" Pullback Sweep 5" Height 6 1 2" Handlebar Diameter 1 1 4" Controls Diameter
Features
- Seamless DOM mild steel construction with black powder coat or chrome finish
- All bars are drilled for internal wiring and notched for TBW
- Made in the U.S.A.
Specs
| Product Name | Handlebar |
| Color/Finish | Chrome |
| Base Color | Silver |
| Finish | Chrome |
| Features | Notched for Throttle-By-Wire / Pre-Drilled |
| Type/Bend | Buckhorn / V-Line / Standard |
| Rise | 6-1/2" |
| Width | 35-1/2" |
| Center Width | 7-1/2" |
| Pullback/Sweep | 5" |
| Height | 6-1/2" |
| Handlebar Diameter | 1-1/4" |
| Controls Diameter | 1" |
| Clamping Diameter | 1" |
| Material | Steel |
| Units | Each |
| Riding Style | Street |
| Year | Brand | Model |
| 2018-2020 | Harley-Davidson | XL1200NS Iron 1200 |
| 2018-2019 | Harley-Davidson | XL1200XS Forty-Eight Special |
| 2016-2017 | Harley-Davidson | FLSTFBS Fat Boy S |
| 2016-2017 | Harley-Davidson | FLSS Softail Slim S |
| 2016-2017 | Harley-Davidson | FXDLS Low Rider S |
| 2016-2017 | Harley-Davidson | XL1200CX Roadster |
| 2014-2017 | Harley-Davidson | XL1200T SuperLow 1200T |
| 2014-2015 | Harley-Davidson | FLSTNSE CVO Softail Deluxe |
| 2012-2017 | Harley-Davidson | FLS Softail Slim |
| 2012-2016 | Harley-Davidson | XL1200V Seventy-Two |
| 2012-2016 | Harley-Davidson | FLD Switchback |
| 2012 | Harley-Davidson | VRSCDX ANN V-Rod Anniversary Edition |
| 2011-2019 | Harley-Davidson | XL883L SuperLow |
| 2011-2013 | Harley-Davidson | FXS Blackline |
| 2010-2020 | Harley-Davidson | XL1200X Forty-Eight |
| 2010-2017 | Harley-Davidson | FLSTFB Fat Boy Lo |
| 2010-2012 | Harley-Davidson | Softail Standard EFI FXSTI |
| 2010 | Harley-Davidson | FXDFSE2 CVO Dyna Fat Bob |
| 2009-2020 | Harley-Davidson | XL883N Iron 883 |
| 2009-2015 | Harley-Davidson | VRSCF V-Rod Muscle |
| 2009 | Harley-Davidson | Fat Boy Lo FLSTFB |
| 2009 | Harley-Davidson | FXDFSE CVO Dyna Fat Bob |
| 2009 | Harley-Davidson | 883 EFI XL |
| 2008-2017 | Harley-Davidson | FXDF Fat Bob |
| 2008-2011 | Harley-Davidson | FXCWC Rocker C |
| 2008-2009 | Harley-Davidson | FXCW Rocker |
| 2008 | Harley-Davidson | FXDSE2 Screamin Eagle Dyna |
| 2007-2017 | Harley-Davidson | VRSCDX Night Rod Special |
| 2007-2012 | Harley-Davidson | XL1200N Sportster 1200 Nightster |
| 2007-2010 | Harley-Davidson | VRSCAW V-Rod |
| 2007-2008 | Harley-Davidson | VRSCD Night Rod |
| 2007, 2010 | Harley-Davidson | Softail Rocker FXCW |
| 2007 | Harley-Davidson | FXDSE Screamin Eagle Dyna |
| 2007 | Harley-Davidson | VRSCR Street Rod |
| 2007 | Harley-Davidson | VRSCX Screamin Eagle V-Rod |
| 2007 | Harley-Davidson | XL50 50th Anniversary Sportster |
| 2007 | Harley-Davidson | Softail Rocker C FXCWC |
| 2007 | Harley-Davidson | 883 Roadster XLR |
| 2006-2017 | Harley-Davidson | FXDB Street Bob |
| 2006-2011 | Harley-Davidson | XL1200L Sportster 1200 Low |
| 2006 | Harley-Davidson | FLSTI Heritage Softail |
| 2006 | Harley-Davidson | FXDI35 Dyna 35th Anniversary Super Glide |
| 2006 | Harley-Davidson | 1200 Roadster EFI XLR |
| 2006 | Harley-Davidson | 883 Low EFI XLL |
| 2006 | Harley-Davidson | 1200 Low EFI XLL |
| 2006 | Harley-Davidson | FLST Heritage Softail |
| 2006 | Harley-Davidson | Low Rider FXDL |
| 2005-2017 | Harley-Davidson | FLSTN Softail Deluxe |
| 2005-2010 | Harley-Davidson | XL883L Sportster 883 Low |
| 2005-2006 | Harley-Davidson | FLSTNI Softail Deluxe |
| 2005-2006 | Harley-Davidson | FLSTFSE Screamin Eagle Fat Boy |
| 2005-2006 | Harley-Davidson | FXDCI Super Glide Custom |
| 2005, 2007-2014 | Harley-Davidson | FXDC Super Glide Custom |
| 2005 | Harley-Davidson | 15th Anniversary Fat Boy FLSTF |
| 2004-2008 | Harley-Davidson | XL883 Sportster |
| 2004-2008 | Harley-Davidson | XL1200R Sportster 1200 Roadster |
| 2004-2006 | Harley-Davidson | FXDI Dyna Super Glide |
| 2004-2006 | Harley-Davidson | FXDLI Dyna Low Rider |
| 2004-2006 | Harley-Davidson | FXDWGI Dyna Wide Glide |
| 2004-2005 | Harley-Davidson | FXDXI Dyna Super Glide Sport |
| 2003-2004 | Harley-Davidson | FXSTDSE Screamin Eagle Softail Deuce |
| 2002-2003, 2005-2007 | Harley-Davidson | XL883R Sportster 883 Roadster |
| 2002-2003, 2005-2006 | Harley-Davidson | 883 Roadster EFI XLR |
| 2002 | Harley-Davidson | FXDWG3 CVO Dyna Wide Glide |
| 2001-2006 | Harley-Davidson | FXSTDI Softail Deuce |
| 2001-2006 | Harley-Davidson | FXSTBI Night Train |
| 2001-2006 | Harley-Davidson | FLSTCI Heritage Softail Classic |
| 2001-2006 | Harley-Davidson | FXSTI Softail Standard |
| 2001-2006 | Harley-Davidson | FLSTFI Fat Boy |
| 2001-2003 | Harley-Davidson | FXDXT Dyna Super Glide T-Sport |
| 2001 | Harley-Davidson | FXDWG2 CVO Dyna Wide Glide |
| 2000-2007 | Harley-Davidson | FXSTD Softail Deuce |
| 2000-2003 | Harley-Davidson | Wide Glide EFI FXDWGI |
| 1999-2009 | Harley-Davidson | XL883C Sportster 883 Custom |
| 1999-2009 | Harley-Davidson | FXSTB Night Train |
| 1999-2009 | Harley-Davidson | FXST Softail Standard |
| 1999-2005 | Harley-Davidson | FXDX Dyna Super Glide Sport |
| 1999-2003 | Harley-Davidson | Sportster 1200 XLH |
| 1998-2017 | Harley-Davidson | FLSTC Heritage Softail Classic |
| 1998-2017 | Harley-Davidson | FLSTF Fat Boy |
| 1998-2017 | Harley-Davidson | XL1200C Sportster 1200 Custom |
| 1998-2008, 2010-2017 | Harley-Davidson | FXDWG Dyna Wide Glide |
| 1998-2005, 2007-2010 | Harley-Davidson | FXD Dyna Super Glide |
| 1998-2005, 2007-2009, 2014-2017 | Harley-Davidson | FXDL Dyna Low Rider |
| 1998-2000 | Harley-Davidson | FXDS-Conv Dyna Convertible |
| 1998-1999, 2007-2010 | Harley-Davidson | FXSTC Softail Custom |
| 1996-2003 | Harley-Davidson | XL1200S Sportster 1200 Sport |
| 1988-1998 | Harley-Davidson | XLH1200 |
| 1988 | Harley-Davidson | Sportster 1100 XLH |
| 1987-1998, 2002-2003 | Harley-Davidson | XLH883HUG Sportster 883 Hugger |
| 1987, 1989-2003 | Harley-Davidson | Sportster 883 XLH |
| 1986-1995 | Harley-Davidson | XLH883DLX Sportster 883 Deluxe |
| 1986-1987 | Harley-Davidson | XLH1100 |
| 1986, 1988, 1999-2001 | Harley-Davidson | XLH883 |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 7 reviews
Sort
Product Reviews
★★★★★ 5
Easy to apply.
Size: 4 Oz
Product did a great job renewing my plastic house shutters. It brought back the deep rich color and made them look better the new.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
★★★★★ 5
Great Stuff
Size: 120 ML
Product is good, Easy to spread for the most part. The only complaint I would give it is that the applicators do not hole up after several applications, I would suggest using a microfiber cloth to apply.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 1, 2026
★★★★★ 5
Restored My Trim Instantly
Size: 120 ML
I used this plastic restorer on the faded trim around my SUV, and the difference was immediate. The dull gray plastic turned back to a rich black color within minutes. It spreads evenly and doesn’t leave greasy streaks behind. After a few weeks and several rainy days, the finish still looks great. My car honestly looks years newer now.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2026
★★★★★ 5
Great result, exceptional value, and easy, forgiving application.
Size: TRIM COAT KIT
I am thoroughly pleased with the results of this product, and the application was easier than I expected. Outstanding stuff. I am writing a longer review in case it helps people who are unsure about a "once and done" product that calls itself permanent. It's not hard to apply. It is forgiving and there's time to even it out. But here are some things to anticipate.
My use case:
I used Cerakote to restore the plastic trim on a used 2014 black Dodge Challenger that had been repainted but the plastic trim was original and it had been kept outside by the prior owner, so the contrast between the new paint and faded trim was noticeable. The trim was originally a deep, dark gray (it is never as black as the paint). It had faded to a medium-gray in many places: running boards on the side beneath the door, below the read bumper (which were also somewhat worn from debris), around the tail lights, and the plastic piece beneath the windshield wipers between the windshield and the hood. These were all looking weathered. The trim was very oxidized in some places, chalky grey near the hood and around the back bumper. The plastic around the tail lights also had light streaks in it from where water drains down from the trunk.
What else I tried before I tried Cerakote:
I got middling results from Mother's Back to Black. It looked somewhat better for a week or two, and then it went back to looking as before. Not impressed.
I got a tip online to try rubbing the plastic trim with a melamine magic eraser, so I did that next, and this made a significant difference. Melamine is abrasive, so be careful if you do this on your trim. I went gently, up-and-down, side-to-side and in small circles, by hand, with gentle pressure like one would with a polishing compound. By removing the oxidation, the plastic was a few shades darker in the worst spots and the streaking on the rear tail light piece was gone. The rough spots on the trim at the bottom of the car and around the wheels looked somewhat better. But it certainly did not "like new."
Cerakote experience:
I decided to give Cerakote a try based on the video and good reviews. Bam! Back to factory-like deep dark gray. I wish I had taken pictures. It's incredible. Fully satisfied!
I had already washed the trim with Dawn dish soap. I started with the trim bone dry. You are warned everywhere that water droplets will ruin the result, so don't expect to do this process right after you wash the car unless you like to live dangerously and have compressed air to spray cracks and crevices.
I was worried that application would be streaky if I didn't do it right. Not so. It is forgiving. Here's what I learned.
1) The first 20% of what you'll get out of the packet goes on heavy with the lightest touch. One packet goes a long way. The next 60% is the "normal" application. This goes on the easiest. You can really milk the last drop out of each towelette, but I didn't because the last 20% of what you can get out of it by rubbing it really hard comes out very light and is not worth the uneven application unless you have some random area you don't care much about and want to use the remainder for that. I only used 5 packets to do the whole car.
When you start a new packet, the beginning is where you might want to go back later and even it out once the application gets more normal. Or better, start a new packet on a big section to spread it around well and then move to smaller trim when the towelette is less fresh.
2) You've got time to work with it and make corrections. It stayed liquid like water for at least 20 minutes in my conditions: about 80 degrees, not very humid, indirect sunlight on an 80 degree car. Don't apply in direct sun or on a hot car. The product then gets sticky as it cures, but you can still work with it during the sticky time, rubbing it in and spreading it evenly with the towelette. I did not use a microfiber to "knock down" heavy spots. I just came back around with the towelette. I think a dry microfiber might pull off too much product. When it is half-cured, it is sticky and you can buff it with the towelette at this stage to further flatten and even things out. Work in sections, one piece of trim at a time.
3) Overlaps won't show as long as you rub it all in thoroughly. I tried the overlapping parallel passes method that they recommend, and this works pretty well. I was worried that I might get a "double heavy" streak where the passes overlap but this not so unless the towelette is fresh, but this is fixable. You can do a pretty natural, casual back-and-forth motion for the most part and it comes out fine. This is NOT a super-finicky product. I made a second or third back-and-forth pass in a few areas, and used circular motion in some places where the trim was textured or a little rough from wear, and it all looked even in the end. Just rub it down into the plastic and even out the sheen while it is uncured and it's good.
4) It cures like you see it when it's still wet. It doesn't lighten up very much as it cures. It just looks a little less wet. So get it right by eye when it is wet and that's pretty much what you will still have in an hour when it is cured.
5) Don't miss a spot! You'll see it for sure if you do because the different is so dramatic. And a "second coat" is not easy or recommended. This is the only once-and-done part that you want to get right, and you have plenty of cure time to be thorough.
6) Use the folded corner of the towelette to get into small corners and edges, like where the trim meets the paint or has an inside corner or some little nook. A fresh towelette is great for getting into small areas because a feather touch applies plenty of product when the towelette is fresh.
The trim now looks amazing and I am entirely satisfied. I will use Cerakote on my other vehicles. The only minor con is a strong ammonia smell when you are up close to it while it is wet. No smell once it is cured. I would definitely wear the recommended gloves while applying. As others say, you will probably drop that towelette on the ground. It's slippery when wet. Keep it folded in quarters as it comes for ease of application. Turn to a new quarter once a side gets dirty or dry and fold it inside out for four more quarters to use.
Bonus, but off-label -- at your own risk:
The product is not intended for the soft rubber around the windows, but I tried it there too, and it looks amazing. All I did was wash the rubber with dish soap like the trim, and I rubbed it a few times with a wet microfiber cloth to get the superficial layer of oxidized rubber off. Then I applied Cerakote. It looks great.
The rubber used to be blotchy and faded. The microfiber evened this out a little. I would not use melamine on the rubber -- this made it look worse in a test section. The Cerakote made it look great: jet black, much shiner, and much more even looking. Not quite "brand new" but far better than I thought possible. I thought I might need to replace the rubber. Now it's looking great next to the jet-black new paint. This afterthought use alone was worth the money.
Can you apply a second coat the next day?
They don't say you can, and I don't recommend it. This is meant to be one-shot, which is why you should check to make sure you don't miss any spots.
I had two areas where I tried a second coat the next day. The first was on the plastic trim between the windshield and the hood. I didn't rub this trim much with melamine beforehand so there was a lighter area (light grey originally, the worst spot) that didn't get as black as the other sections so I did it again, which helped a little, but not much. I didn't wash this area with soap beforehand because I wasn't intending to fix it until I got going. Once you put things back to black you will start noticing other faded things more.
Likewise, I did a second coat on the very top of the soft rubber at the bottom of the windows (the part which faces upward and thus gets the most sun), it wasn't as shiny as the other parts, so I went over that section gently again the next day with a fresh towelette.
As soon as I did it, I thought it was a mistake. This didn't go well initially because the cured coating is very hydrophobic so the new, wet, Cerakote of the second coat goes on smooth initially and then "puddles up" into little droplets a few minutes later. It doesn't want to stick to the first coat. I thought I had messed it up, but I let it cure a little until the sticky phase, and spread it out again with the towelette. It stayed that time but gathered back a little into some streaks. I spread it once more a few minutes later and it looked good. It stayed even. It looks just fine a few days later, so I think it cured OK.
I hope this product last for months as advertised. Even if it doesn't I would totally do it again because the results are superior, I still have half my towelettes left, and the product is not expensive. 10/10 would do again and will recommend to everyone.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 25, 2025
★★★★★ 5
Easy to use, amazing results
Size: TRIM COAT KIT
This is an awesome product that is easy to use and has amazing results. My plastic trim never looked so good.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026