SKU: 53418974630

Fits Chevy/GMC Sierra 3500 HD/Silverado 3500 HD 2&4WD (20-24) 3" Lift Kit; 95630

$359.98 $399.98
Save 10%
No.2 Bestseller on lamcf.fr >

Pay in installments of $100.00 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 24 - Jul 29

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Fits Chevy/GMC Sierra 3500 HD/Silverado 3500 HD 2&4WD (20-24) 3" Lift Kit; 956303 Inch Lift Kit Chevy GMC Sierra 3500 HD Silverado 3500 HD (20 23) Improved Ground Clearance and Ride Quality. Take your workhorse to the next level with Rough Country's 3. 5" Suspension Lift kit for dually models. Rough Country's 3. 5" Suspension Lift kit provides an improved ground clearance and is designed for on or off road driving. Take your truck to new heights with this excellent option for GM HD Models. Innovative Design and Construction. This

3 Inch Lift Kit - Chevy/GMC Sierra 3500 HD/Silverado 3500 HD (20-23)

Improved Ground Clearance and Ride Quality. Take your workhorse to the next level with Rough Country's 3.5" Suspension Lift kit for dually models. Rough Country's 3.5" Suspension Lift kit provides an improved ground clearance and is designed for on or off-road driving. Take your truck to new heights with this excellent option for GM HD Models. Innovative Design and Construction. This kit features a set of high-quality, tubular Upper Control Arms with durable rubber bushings. These arms are designed to promote a factory-like geometry by keeping the ball joint at optimum angles after lifting. This design allows for an improved, full range of motion from the ball joint, with less stress, wear and tear. This kit also features a set of durable, forged torsion bar keys, offering uncompromising strength and rigidity over factory keys. A set of front and rear N3 nitrogen-charged shocks are also included in the kit, giving your truck incredible ride-quality both on and off-road. Once installed, this kit gives your truck plenty of ride height for up to larger tires while offering a clean, level look from front to rear. Installation. Featuring a 100% bolt-on installation process, an estimated timeframe of 4-6 hours is predicted to complete the install. This full kit can be installed at home using standard tools and can be completed efficiently and quickly! Lifetime Replacement Warranty. Rough Country's 3.5" Suspension Lift Kit is backed with a lifetime replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!


Features:

  • 3in lift in the front and 2.5in lift in the rear
  • Easy bolt-on installation
  • No cutting, drilling or welding
  • Increased ground clearance
  • Levels the front with the rear of the vehicle
  • Torsion bar keys are forged for uncompromised strength
  • Keys are indexed to not stress OE components
  • Upper control arms help maintain factory-like geometry while keeping a full range of motion
  • Upper control arms feature OEM style durable rubber bushings.

Application:

Year Make Model Submodel
2020-2024 Chevrolet Silverado 3500 HD LT
2020-2024 Chevrolet Silverado 3500 HD LTZ
2020-2024 Chevrolet Silverado 3500 HD WT
2020-2021 GMC Sierra 3500 HD Base
2020-2024 GMC Sierra 3500 HD SLE
2020-2024 GMC Sierra 3500 HD SLT
2022-2024 GMC Sierra 3500 HD Pro
2023-2024 GMC Sierra 3500 HD AT4
2024 Chevrolet Silverado 3500 HD High Country
2024 GMC Sierra 3500 HD Denali Ultimate
2024 GMC Sierra 3500 HD Denali
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 53418974630

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.0 ★★★★★
Based on 21 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Talagand
Birmingham, US
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it. Couple things: 1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky. One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection. Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it. 2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless. 3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together. 4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place. 5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options. NOW on to the utility itself. 1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great! 2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world. 3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it. All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
L
Verified Purchase
Lisa Ryan
Dallas, US
★★★★★ 5
Great product
Color: Black, Size: 4 Panel-88''
Literally exactly what I was needing
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2026
G
Verified Purchase
Grumpy
Belleville, US
★★★★★ 5
It's good...
Color: Black, Size: 4 Panel-88'', Color: Black, Size: 4 Panel-88''
It's good....took about 45 minutes to put together. No issues. Looks great...made the wife happy....
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026
N
Verified Purchase
NettyB Variety Shoppe
Lowell, US
★★★★★ 5
Durable non see through fabric
Color: Black, Size: 4 Panel-88'', Color: Black, Size: 4 Panel-88''
This room divider is exactly what I need. It is very durable and easy to move around. You can’t see through the fabric. I love it. My reason for purchasing this divider is to use as a divider and as a backdrop holder. And it serves both purposes perfectly. It looks much better in person than on camera. It did have the spots on one side on all of them but in a few days they went away. It foldaway and tucked away easily.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 14, 2025
B
Verified Purchase
Brittany
Belleville, US
★★★★★ 4
Great product
Color: Black, Size: 4 Panel-88''
Love the look of this after it’s put together. It’s pretty sturdy and the connecting clips allow you to shape it different if you need it to fit in a corner. We use this at work so it’s great for the space we use it in. A little hard to store because it doesn’t fold up nicely because of the feet on it but I’m happy with it overall.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2026

recommand products

Yoshihiro Ocean Blue Handle with Alternative Ivory White Bolster for Nakiri Vegetable Knife
79.99
Ceiling spotlights Globo Lighting Robby metal GU10 2L
102.85
Plugin wall lamp Globo Lighting Robby metal GU10
102.85
Yoshihiro High Speed Steel HAP40 Petty Multipurpose Chef Knife with Triple Ring Handle
200.00
Yoshihiro High Speed Steel HAP40 Gyuto Chefs Knife with Ocean Blue Handle and Magnolia Saya Cover
210.00