Pay in installments of $733.12 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Sep 5 - Sep 10
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Ohaus 23 kg Capacity Analog Heavy Duty Orbital ShakerOverview The OHAUS Analog 23 kg Capacity Heavy Duty Orbital Shaker is designed for applications with heavy duty loads. Shaker provides reproducible motion that is evenly distributed throughout the entire surface of the tray. Operating Features: Microprocessor Control: The variable speed microprocessor control provides consistent uniform shaking action. The shaker will automatically restart after a power interruption. Triple Eccentric Drive:
Overview
The OHAUS Analog 23 kg Capacity Heavy Duty Orbital Shaker is designed for applications with heavy duty loads. Shaker provides reproducible motion that is evenly distributed throughout the entire surface of the tray.
Operating Features:
- Microprocessor Control: The variable speed microprocessor control provides consistent uniform shaking action. The shaker will automatically restart after a power interruption.
- Triple Eccentric Drive: Permanently lubricated ball bearings and maintenance free, brushless DC motor provide reliable service and continuous duty operation.
- Adjustment Knobs: Basic speed and time knobs with dial settings from 1 to 10.
Safety Features:
- Speed Ramping Feature: Slowly increases speed to desired set-point to avoid splashing.
- Spill-Resistant Design: Channels fluids away from internal components.
Operating Conditions: Unit can be run in cold rooms, incubators, and CO2 environments from 0 to 40°C (32 to 104°F), maximum 80% relative humidity, non-condensing.
Applications: Bacterial suspensions, staining/destaining, and general mixing.
Ordering Information: Units include a 3-wire cord and plug. Units are also supplied with an 18 × 24" (45.7 × 61 cm) non-skid rubber mat.
Key Attributes
| Type | Standard Benchtop |
| Platform Area (ft^2) | 3 |
| Platform Dimensions | 18 x 24" |
| Max Load (lb) | 50 lb |
| Incubation | No |
| Refrigeration | No |
| RPM - Max | 500 |
| RPM - Min | 25 |
| Orbit Diameter (mm) | 25 mm |
| Warranty | 2 Years |
| Weight (lb) | 109 |
| Width (in) | 23.5" |
| Depth (in) | 26.7" |
| Height (in) | 6" |
Manufacturer Specifications
| Control Type | Analog |
| Frequency | 50/60 Hz |
| Voltage | 120V |
| Amps | 5 |
| Watts | 75 |
| Speed Range | 25 to 500 rpm |
| Timer | 1 minute to 120 minutes |
| Orbit | 25 mm (1") |
| Maximum Capacity | 50lb (22.7kg) |
| Tray Material | Aluminum |
| Tray Dimensions | 18 x 24" |
| Overall Dimensions | 23.5 x 26.7 x 6" |
| Applications | Bacterial suspensions, staining/destaining, and general mixing. |
| Certifications | TUV Listed |
| Warranty | 2 years |
| Unit Supplied With | A 92" (234cm) detachable, 3-wire cord and plug. An 18 x 24" (45.7 x 61cm) non-skid rubber mat. |
| Origin | Manufactured in the USA |
FAQ
I have an application where I need to shake items under vacuum. Can this Shaker be used in a high-vacuum environment?
Yes, it can be used under vacuum.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 11 reviews
Sort
Product Reviews
★★★★★ 4
Pretty good, take your time and install it well
Size: side table leg
Materials are pretty solid, but once assembled it’s not as sturdy as you would think it should be since the material itself was solid, i say give them a chance, everything out there that’s similar is way over priced
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
★★★★★ 5
Heavy duty legs for table.
Size: side table leg
Perfect legs for a table I am having made. I have an cottonwood slice. It's heavy and needed something substantial.
These are perfect.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
★★★★★ 5
Robust pipe & fittings with a beautiful, smooth black finish
Size: side table leg
This set of pipe & fittings for use as low table legs is heavy duty and aesthetically pleasing. Especially when the pieces are handled, the tactile sensation is much nicer than with plumbing steel pipe because this product is beautifully finished smooth. The black pipes are quite smooth as well as the fittings.
The pieces are all also pretty robust, though the wall thicknesses are less than in pipe for pressurized water systems. Of course that makes sense as this product does not need to hold fluid pressure.
In my view they got the heaviness factor of this product just right; it's not as heavy or robust as black pipe used in natural gas supplies, but still robust and pretty heavy. Assembled, this product is absolutely stiff and unyielding for a solid table that could hold a man's weight easily.
The feet utilize a brilliant scheme so that each foot can be independently adjusted for an uneven floor. Thus a level table on an uneven floor is easily accomplished. The feet simply extend the effective leg length by screwing counter-clockwise. To prevent any shifting at the threads adding some pipe compound or teflon tape may be advised. Even masking or duct tape might work as the idea is to just fill any gaps where male threads meet female threads.
The four flanges at the tops of the legs provide a wide, solid surface for attaching the table top, with either hidden screws underneath or you could through-bolt a glass table top (provided you have the skill to drill glass!). I think this product would look great with a glass top.
Assembly is quick and easy. The hardest part is drilling holes underneath the table top to accept screws. No pipe wrenches are needed as the pieces screw together by hand to an adequate tightness. If any doubt whether they are tightened enough have a strong person with grippy gloves finish. The "X" in the center attaches to the legs with a very clever machine screw system tightened with the included hex wrench. This is presumably because if tightened simply by screwing the fittings, the point of snugness would not likely be where the "T" fittings are exactly vertical. The maker has solved this problem so that you are assured that all legs will be in the perfect vertical position once everything is tight. The setup is also nice and rigid once tightened. This is a huge benefit of steel pipe projects; they are really solid.
The black finish is clearly very durable, like a powder coat. It appears that it will provide excellent protection against rust. Coverage is complete; I found no dings or scratches anywhere on any piece.
Overall this is a very well-designed product for function and aesthetics. Perfect for a beautifully renovated warehouse condo where an industrial vibe is desired in a rock-solid table that won't shift around. The smoothness of the pipe is top notch. I've used lots of pipe in projects, some of it actual water pipe and some decorative pipe such as this. I've never seen better quality decorative pipe as this maker put in the effort to finish it beautifully smooth. At currently $34.99 I find the price quite reasonable too.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 18, 2026
★★★★★ 3
the height is only 16"
Size: coffee table leg
The height is only 16". From the description it appears to be 24" wide and 24" high.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 2, 2026
★★★★★ 4
Good DIY Pipe Legs but Powder Coat Quality Lacks
Size: side table leg, Size: side table leg
These industrial style pipe legs make building a DIY end table easy and the kit saves a trip to the hardware store. The fittings go together normally and assembly is simple. Comes individually wrapped. My main issue is the powder coating looks and feels cheap and rubs off easily. The pipes already had marks from touching each other from unboxing. If you do not mind some wear on the finish over time this is a decent purchase. The metal at the hardware store will be thicker and more durable but will cost more. I’d recommend based on ease of having a kit and it being delivered saving me a trip.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 30, 2025
recommand products
BAREFOOT CARIBOU Over Luggage Organizer for Carry On Bag or Suitcase with Storage Pockets, 16” Laptop Sleeve with Handle, Travel Accessories Bag Slide On Luggage Harness with Adjustable Straps (Black)
31.45
United Colors of Benetton Fabrica Laptop Backpack, Black
53.95
TUMI - Voyageur Halsey Backpack - Travel Backpack - For Business, Fashion, Commute - Holds Up to 14" Screens - Black & Gold
197.50
VentureVault All Aluminum Carry On Luggage 22x14x9 Airline Approved，Hard Shell Carry On Luggage, Zipperless Luggage Aluminum Suitcase Luggage (sliver, 20inch)
134.88
Custom-fit Protective Luggage Cover for the RIMOWA Original Check-In L I Neoprene cover against scratches and dents (Cover without pocket)
140.00