SKU: 69467969409

Pagid Racing RST 5E Brake Pads - Front | S8030T5E001

$307.35 $341.50
Save 10%
No.2 Bestseller on lamcf.fr >

Pay in installments of $85.38 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 6 - Aug 11

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Pagid Racing RST 5E Brake Pads - Front | S8030T5E001Pagid Racing RST 5E Brake Pads Front S8030T5E001 Pagid Racing brake pads are engineered for high performance braking in demanding environments, including track days, sprint racing and endurance applications. These pads are chosen by drivers and teams who need consistent pedal feel, repeatable braking response and strong thermal stability under load. Key Features Motorsport focused brake pad compound Consistent braking response under repeated heavy use

Pagid Racing RST 5E Brake Pads - Front | S8030T5E001

Pagid Racing brake pads are engineered for high-performance braking in demanding environments, including track days, sprint racing and endurance applications. These pads are chosen by drivers and teams who need consistent pedal feel, repeatable braking response and strong thermal stability under load.

Key Features

  • Motorsport-focused brake pad compound
  • Consistent braking response under repeated heavy use
  • Strong pedal feel and thermal stability
  • Suitable for performance builds, track day cars and race applications
  • Trusted Pagid Racing braking technology

Compound Information

This listing is for Pagid Racing compound RST 5E. This compound is developed for high-performance use where fast response, stable friction and confidence under repeated heavy braking are important.

Technical Description

Pushing the limits? The RST 5E is Pagid Racing’s apex sprint compound designed for aggressive applications where only extreme thermal durability, blistering bite and unwavering performance will cut it. Forged for front-axle GT, touring car, rally, and rallycross use, RST 5E raises the bar with the highest initial friction level in the Pagid portfolio, enhanced fade resistance, and up to 10 % increased pad life over earlier generations. Thanks to its OTM (On-Thermal-Management) design, more of the heat stays inside the pad rather than being dumped into your caliper or brake fluid, preserving system stability under brutal conditions. Whether on a sprint track, tarmac rally stage, or RX circuit, RST 5E offers dramatic bite, confident modulation, and performance that doesn’t fade, even when everything else in the drivetrain is screaming.

Fitment

This pad shape is listed for selected applications across Mitsubishi Lancer Evo IX Gravel Rally 05, Mitsubishi Lancer Evo X Tarmac Rally [Brembo Caliper] 07, Brembo 07.5169. [type 140 or B18 family] 16mm,17mm ,20mm,25mm,28mm, including 07, 16. Please verify full compatibility before ordering.

  • Mitsubishi Lancer Evo IX Gravel Rally 05 - 07
  • Mitsubishi Lancer Evo X Tarmac Rally [Brembo Caliper] 07 - 16
  • Brembo 07.5169. [type 140 or B18 family] 16mm,17mm ,20mm,25mm,28mm

Delivery

Shipped within 3 weeks

Why buy from Torque Lab

  • Official dealer for performance braking parts
  • EU-focused support for track and performance builds
  • Carefully selected motorsport components
  • Reliable sourcing and delivery across Europe
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 69467969409

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 20 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
ralversity
Battle Creek, US
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
T
Verified Purchase
Talagand
Massapequa, US
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it. Couple things: 1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky. One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection. Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it. 2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless. 3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together. 4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place. 5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options. NOW on to the utility itself. 1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great! 2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world. 3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it. All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
S
Verified Purchase
Sami Jo
Port Orchard, US
★★★★★ 5
Quick and pretty privacy screen
Color: Beige, Size: 4 Panel-67”
Relatively easy to assemble. Looks very nice at the nursing home of my friend and is sturdy. Unfortunately, aides place towels and sometimes clothes over it and it stands stable. The bamboo color is nice to look at. It is lightweight and can be moved easily!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
K
Verified Purchase
KMB
Massapequa, US
★★★★★ 5
Good height, versatile.
Color: Brown, Size: 4 Panel-67”
Well made, nice style. Best indoors since it tends to blow over if outside.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 26, 2026
M
Verified Purchase
Michelle
Dallas, US
★★★★★ 3
Esthetically sound, materially flimsy
Color: Beige, Size: 4 Panel-67”
The item at first seemed okay and quality was good. But it’s a little flimsy and tips over frequently. I’m thinking of returning and replacing pretty soon.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026

recommand products

Glas Beaded Glass Butt Plug with Tapered Base
30.99
Glas Classic Smooth Dual-Ended Dildo
35.99
Glo Bondage Glow In The Dark Wrist Cuff
34.99
Pearl Shine Smooth Vibrator
12.99
Gender X Barrel Of Fun Double Side Stroker
93.98