Pay in installments of $50.00 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Sep 21 - Sep 26
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Upgraded EKPM3Our upgraded EKMP3's offer a 22 Amp INCREASE in maximum current capacity over an OEM EKPM3. This allows for more current to be supplied to your low pressure fuel pump (LPFP) without risking thermal overload, which often leads to your car shutting down. This means that you won't have to worry about being stranded on the side of the road while waiting for your EKP module to cool down, especially when you've installed a large low pressure fuel pump such
Our upgraded EKMP3's offer a 22 Amp INCREASE in maximum current capacity over an OEM EKPM3. This allows for more current to be supplied to your low pressure fuel pump (LPFP) without risking thermal overload, which often leads to your car shutting down. This means that you won't have to worry about being stranded on the side of the road while waiting for your EKP module to cool down, especially when you've installed a large low pressure fuel pump such as a Walbro 525lph or 535lph.
What makes this an upgrade over a factory EKMP3?
We start off by taking a brand new EKMP3 and removing the stock half bridge IC fuel pump motor driver and then we replace it with a brand new genuine Infineon half bridge IC. The half bridge IC is responsible for supplying varying current based on flow requests from the DME (the car's computer). This takes the brunt of the load and what causes thermal overload shutdowns on factory EKMP3s when using a larger-than-stock low pressure fuel pump. The factory half bridge is rated for a maximum of 33A at 60 seconds, but can only supply a sustained 17 - 18A before shutting down. Our upgrade allows for a maximum of 55A at 60 seconds and can supply a sustained 30+A without overheating*. This allows for significantly more headroom when using something such as a Walbro 535 or Walbro 525lph pump.
Important Fitment Notes:
- Please make sure to choose the EKMP3 that corresponds with your chassis. For example, if you have an E-Chassis (Non-M), make sure to choose the EKMP3 that has "E-Chassis" in the name. (Please see below for E-Chassis fitment).
- If you have an F-Chassis (Non-M), please make sure to choose the EKMP3 that has "F-Chassis" in the name. (Please see below for F-Chassis fitment).
- These will not work with any M cars. (M3, M4, M2, etc...) Unless they are powered by an N55 or N54 and use a compatible EKP module.
- B58, B48 and B46-powered cars do not use an EKPM3.
FAQ:
- Does this upgrade require coding?
- Yes. Although the module may work without being coded, we strongly recommend that you properly code the module to your vehicle. Coding can be completed with ProTool or NCS Expert for E-Chassis. For F-Chassis vehicles, we recommend using ProTool, E-SYS or any other capable program to perform coding operations. We strongly recommend installation and coding to be performed by a qualified professional. Failure to code the module to your vehicle upon installation will void the module's warranty.
- Can you code this for me?
- We currently do not have the ability for remote coding or bench coding for these modules.
- Do I need active cooling?
- If you are using a factory sized low pressure fuel pump, no active cooling is required. However if you are using a Walbro 450lph or anything larger, it is required to get the best longevity out of your new EKMP3.
- How does the integrated automatic cooling work?
- The integrated automatic cooling works by us installing a thermal activation switch directly onto the new half bridge IC. When the half bridge IC reaches 50°C, the 40mm fan will turn on and keep running until the IC is below 50°C or until the EKMP3 stops receiving power.
- I have an EKPM2, can I upgrade to this?
- Yes. You can upgrade to this. We recommend using the HW05 and below module. You will need to code it in order for it to function properly.
- Can I run more than 1 low pressure fuel pump off of this module?
- No. We do not recommend that you use more than one low pressure fuel pump with any EKP module due to the factory wiring supplying power to the EKP Module is only 14 gauge, which is not rated for the type of power demands that two low pressure fuel pumps would require. However, if you have a second pump running off of a Hobbs switch or relay, our Upgraded EKPM3 will still work in that configuration.
Vehicle Fitment Lists:
Links for vehicle fitments provided by Realoem.com
E-Chassis:
- 1' E81 (02/2006 — 12/2011)
- 1' E87 (02/2003 — 02/2007)
- 1' E87 LCI (01/2006 — 06/2011)
- 1' E88 (11/2006 — 10/2013)
- 1' E82 (11/2006 — 10/2013)
- 3' E90 (02/2004 — 09/2008)
- 3' E90 LCI (07/2007 — 02/2012)
- 3' E91 (02/2004 — 08/2008)
- 3' E91 LCI (07/2007 — 05/2012)
- 3' E92 (05/2005 — 02/2010)
- 3' E92 LCI (11/2008 — 06/2013)
- 3' E93 (09/2005 — 02/2010)
- 3' E93 LCI (11/2008 — 10/2013)
- 5' E60 (02/2002 — 06/2007)
- 5' E60 LCI (10/2005 — 08/2010)
- 5' E61 (11/2002 — 02/2007)
- 5' E61 LCI (11/2005 — 05/2010)
- 6' E63 (02/2004 — 07/2007)
- 6' E63 LCI (04/2006 — 07/2010)
- 6' E64 (03/2004 — 07/2007)
- 6' E64 LCI (04/2006 — 07/2010)
- X1 E84 (09/2008 — 06/2012)
- X5 E70 (02/2006 — 03/2010)
- X6 E71 (01/2007 — 03/2010)
- Z4 E89 (01/2008 — 08/2016)
E-Chassis Part #'s that our upgraded EKMP3's are direct replacements for:
Links to part #'s for more info provided by Realoem.com
F-Chassis:
- 1' F20 (07/2010 — 02/2015)
- 1' F20 LCI (05/2014 — 06/2016)
- 1' F21 (07/2010 — 02/2015)
- 1' F21 LCI (06/2014 — 06/2016)
- 2' F22 (10/2012 — 06/2016)
- 2' F87 M2 (11/2014 — 06/2017)
- 2' F23 (03/2014 — 06/2016)
- 3' F30 (02/2011 — 01/2016)
- 3' F30 LCI (10/2014 — 10/2018)
- 3' F31 (07/2011 — 07/2015)
- 3' F31 LCI (10/2014 — 05/2019)
- 3' F34 GT (07/2012 — 06/2016)
- 3' F34 GT LCI (11/2015 — 12/2019)
- 3' F35 (06/2011 — 08/2015)
- 3' F35 LCI (01/2015 — 08/2016)
- 4' F32 (11/2012 — 02/2017)
- 4' F33 (03/2013 — 02/2017)
- 4' F36 Gran Coupé (07/2013 — 02/2017)
- 5' F07 GT (09/2008 — 06/2013)
- 5' F07 GT LCI (08/2012 — 02/2017)
- 5' F10 (01/2009 — 06/2013)
- 5' F10 LCI (08/2012 — 10/2016)
- 5' F11 (01/2009 — 06/2013)
- 5' F11 LCI (08/2012 — 02/2017)
- 5' F18 (08/2009 — 08/2013)
- 5' F18 LCI (04/2013 — 04/2016)
- 6' F06 Gran Coupé (05/2011 — 03/2015)
- 6' F06 Gran Coupé LCI (05/2014 — 09/2018)
- 6' F12 (10/2009 — 02/2015)
- 6' F12 LCI (05/2014 — 05/2018)
- 6' F13 (03/2010 — 02/2015)
- 6' F13 LCI (05/2014 — 10/2017)
- 7' F01 (06/2007 — 06/2012)
- 7' F01 LCI (05/2011 — 05/2015)
- 7' F02 (07/2007 — 06/2012)
- 7' F02 LCI (05/2011 — 05/2015)
- 7' F03 (06/2008 — 05/2012)
- 7' F03 LCI (03/2012 — 06/2013)
- 7' F04 Hybrid (10/2008 — 06/2012)
- X3 F25 (06/2009 — 08/2017)
- X4 F26 (05/2013 — 03/2018)
- X5 F15 (08/2012 — 06/2018)
- X6 F16 (09/2013 — 05/2019)
F-Chassis Part #'s that our upgraded EKMP3's are direct replacements for:
Links to part #'s for more info provided by Realoem.com
- 16147371832
- 16147358144
- 16147301554
- 16147276073
- 16147268462
- 16147264011
- 16147240389
- 16147229175
- 16147219343
- 16147411596
This product is not DOT approved and is not intended to be installed in a vehicle for street use and may void your vehicle's warranty.
This product does not guarantee to fix any issues that your vehicle may be experiencing and is only intended to perform as an enhanced replacement for your OEM part.
*The factory wiring cannot sustain more than 20A of current for a very short duration. Overheating the of the module can still occur if factory wiring or connectors are damaged, corroded or loose. Additionally, overheating can occur if the upgraded EKPM3 loses CAN bus connection as it will trigger a failsafe to 100% duty cycle as a factory module would. Installing an E-Chassis EKPM3 in an F-Chassis vehicle or vice versa will damage the module and make it ineligible for return or warranty.
Warranty Information:
This product comes with a 2-year limited warranty. Modules must be coded upon installation in order to retain their warranty. Damage caused by melted factory wiring or connectors will void the module's warranty. Please visit our Warranty Policy page at the following link for more information: https://arcterminator.com/pages/product-warranties
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 5 reviews
Sort
Product Reviews
★★★★★ 5
Glad I pulled the trigger on this.
I was researching many similar A/V Receivers and reviews for all were about the same I felt. Some would keep the first one they bought (around 1k range or less) and others would return them and buy a different brand that was in the price same range.
I was able to buy this model for the cheaper price that has popped up at $565.94 (before tax). I read a review at Cnet Best AV Receivers for 2024. I normally use a grain of salt when reading reviews at sites like Cnet but since I couldn't find what I felt was a real end user consensus of go with this one not that one I then based my purchase off this line from the Cnet review "If you're spending under $1,000, there are four main receivers to choose from -- the Sony STR-AN1000, the Yamaha RX-V6A, the Onkyo TX-NR6100 and the Denon AVR-970H. All offer excellent performance, so the short answer about which to buy is whichever is available for the lowest price." That stuck with me since I did get this for cheaper than the Onkyo TX-NR6100 (a brand I would consider first).
If I had more in my budget I might have gone with the more expensive Onkyo TX-RZ50 due to it's great reviews as well but this Sony STR-AN1000 does have a bunch of future proof features that I wanted.
So far I am impressed with the Sony STR-AN1000 and have not seen any downside. I did pair this system with Klipsch Reference Series 5.2 Home Theater Pack with 2X R-625FA Floorstanding Speakers, R-52C Center Channel Speaker, 2X R-41M Bookshelf Speakers (as found on Amazon). That also comes with 1xReference R-12SW 12" Subwoofer. So far it has been great!
Based on my research I would recommend you buy Oxygen Free Pure Copper wire instead of slightly cheaper 2 Core Parallel (Stranded CCA) Copper Clad Aluminum Wire Strands (for example). The cheaper ones that aren't pure Copper that may not deliver as well. That is going to be based on your own personal experience but I suggest spend once for something and not twice.
I did not buy any banana clips to use with this receiver but I also forgot how much of a pain it can be unscrewing the caps and having to thread the speaker wire. SO I might suggest that if are on the fence about such a purchase.
We only use Blu-ray or internet based streaming options with our setup through a Chromecast Ultra. I tested my Blu-ray of Ghostbusters Frozen Empire. The intro with the thunder and lightning could be felt and heard just like what I would expect in real life using this receiver and speaker setup. The system has no issue sending 2160p 4K HDR content through to the TV and of course the 5.1, Dolby Atoms, etc through as stated for support in documentation.
I have not taken the system beyond a volume for 40 for testing different audio sources as I am breaking in the new speakers but the delivery really starts jumping up at about 34.
I decided to switch from using sound bar systems to a full A/V Receiver and proper speaker setup due to sound bar systems underdelivering (even at the higher prices) or killing themselves due to trapped heat (I am talking about my personal experience with LG). Yes the initial cost is more but there is a difference between hearing what you are watching and experiencing it and longevity of product.
I plan to keep this setup of mine for as long as possible and do not currently anticipate any need to replace short of conditions out of my control. I would recommend based on pricing or your personal preference of brands.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 21, 2024
★★★★★ 3
TERRIBLE Home Theater AVR, Difficult to Use
TERRIBLE Home Theater AVR. I bought this based on the many very high level reviews and recommendations available on multiple sites. What a mistake. This unit is very difficult to use, and that is made even worse by Sony's BS proprietary insistence to not let their remotes work with any other brands of equipment except their own!
After setup, I find there is no default input selection after startup of the AVR, not even the commonly seen default to the last used input. What this means is that EVERY TIME I want to use any audio or video unit with this AVR, I must first use the AVR remote to select the input, THEN put it down and find a different remote to use for whatever unit I want to watch. What a PAIN in the rear!
The next totally unacceptable issue is that every time an input is changed, there are about 5 odd low-frequency thumps from the speakers - this has NEVER happened before with other AVRs and the same equipment, so this problem is very specif to this horrible amplifier.
Other irritants are that the AVR display shows many almost meaningless things that are of no particular value, but they have removed ALL indications of what speakers are currently active for whatever input is being received. In addition to that, this AVR does not properly decode some input types that it is supposed to support (based on using format-specific test files).
Another issue is that the input setting on my smart TV for this AVR does not stay Active while the TV is using a different input, despite the fact that the amplifier is always on, and the TV audio output IS constantly using the AVR for the speakers. This is somewhat related to the first problem I noted - since the TV does not think that the AVR is turned on, I cannot use the TV to select that input; I have to GO BACK to the nasty Sony remote just long enough to change inputs AGAIN, then put down that remote and switch to another. Again, I repeat that this behavior has NOT occurred with other AVRs tested in this Home Theater, only this one, and it makes life miserable. Even when I turn on a different connected device that uses HDMI Control to turn on the AVR, this brain-dead unit will NOT switch to that input after it powers on - I still have to manually make that switch with the Sony remote!
Another issue is the inability to use a normal coax or balanced FM antenna input on this receiver - they give you a little single wire antenna that uses a strange miniature plug that is totally worthless in my area - cannot pick up a single station! And there is no way to connect my outdoor antenna like I have been able to do with every other receiver!!!!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 21, 2025
★★★★★ 5
Sounds great and the 360 spatial sound mapping is amazing.
I was very happy with my previous AVR, but when it failed I took the opportunity to get up to date and after some research I settled on this. I am so happy I did.
The positive reviews were not lying. This AVR sounds down right amazing considering the price point. Love the Chromecast feature as well as the Spotify integration.
However, it's the movie audio that really shines. After the very short calibration, their 360 spatial sound mapping when switched on really makes such a huge difference. Most of us will not be able to make a dedicated theater room, so this do the corrections for speaker placement is next level. Not to mention their virtual speaker placement technology. I don't know how it's done, but when I 1st used it, this thing had me amazed at sound placement from areas where the sound should be coming from, but I know I had no speaker there.
Even the short calibration was impressive. At the end of the process it knows not only where you are in relation to listening position, but it also knows exactly where each and every speaker is relative to each other in the room including their height. Remarkable. OCD me verified the measurements which you can displayed, with a laser measuring tool.
Now my biggest issue is that I now feel the need to go through all my movie collection to hear the difference.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 18, 2024
★★★★★ 1
Product does not function as befits a brand name like Sony
Review updated after TWO returns to the repair center and MANY calls to both Support and the CS Escalation department:
I'M STILL NOT PLEASED WITH THIS PRODUCT. During startup, this receiver bounces back and forth from input source to input source as if I triggered a roulette wheel. Where will it finally stop?
In my case, I most often use Video input. Sometimes during startup, it will momentarily display the Video input as expected, but will then start jumping/fishing around to other inputs types, including those I've never used. Eventually, it may return to the Video input, but it will not display the actual video or audio content. Instead, it just displays a black banner that reads VIDEO. I then have to turn the receiver off and on again hoping that maybe it will work this time.
Neither Sony's escalation Team, nor the repair facility will answer the simple question, "What SHOULD it do when I first turn it on?"
In addition, on at least two occasions, during startup, I saw PLEASEWAIT written across the display for 75 seconds before the device actually started up OR rebooted. (Note: THIS issue appears to be resolved by the repair center replacing a circuit board.)
Another related annoyance is that when video content changes (e.g., from a show to a commercial, back to a commercial on YouTube), each break in the chain displays 5+ seconds of black screen even though you can hear the audio. This doesn't sound like much, but when it does this every time, it gets annoying AND is infinitely longer than my previous 10 y/o receiver.)
About 2-3 times an hour, while viewing consistent content from the same input, the screen will suddenly go black, then the audio drops out, and then it will flash a HDCP 2.3 warning blue screen. Unacceptable!
In short, and IMHO, the audio quality is very good, but basic functionality is SEVERELY clunky. Again, IMHO, this product should have NEVER gone to market.
The combination of poor functionality AND a dismal customer experience forever diminishes Sony's former world-class brand status.
P.S.: Sony's Escalation department told me that they simply DO NOT provide refunds if you've had the product more than 30 days. So make sure that you test ALL functionality as soon as it arrives.
Caveat emptor.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 16, 2025
★★★★★ 5
Excelente
Size: 18 AWG-200 ft
Buen artículo recomendado
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026