Valvetronic Design BMW F8x M3 / M4 Equal Length Valved Sport Exhaust SystemWelcome to the Valvetronic Designs cat back exhaust system for the F8x platform, or in other words, the solution to the F8x sound problem. For years enthusiasts have wanted to find a solution to the buzzy and raspy sound these cars produce from the factory. Since these cars were released back in the late portions of 2014 we all knew there is world class sound lying under all the rasp. Our mission has been to find this hidden sound and allow all F8x

Welcome to the Valvetronic Designs cat-back exhaust system for the F8x platform, or in other words, the solution to the F8x sound problem. For years enthusiasts have wanted to find a solution to the buzzy and raspy sound these cars produce from the factory. Since these cars were released back in the late portions of 2014 we all knew there is world class sound lying under all the rasp. Our mission has been to find this hidden sound and allow all F8x owners to enjoy it. This full catback is comprised of a 2.75" equal length mid section with an H pipe configuration. After traveling through the H pipe the exhaust is combined into a 3.5-inch axle back. This combination helps smooth the exhaust tones to provide a very enjoyable sound through the entire rev range. When operating with the valves open, the exhaust gases exit unrestricted out of the passenger side exhaust tips. With the valves closed the exhaust passes through our quad chambered muffler and out of the drivers side exhaust tips for a lower volume experience, very well suited to daily driving and not alerting the Karens. This system mounts up to factory mounting points and is a direct bolt-on. No cutting or welding necessary. It's time to make the F8x sound like it always should have.

Sound Developments.

At Valvetronic Designs, we are chasing perfection and we believe this, our equal-length exhaust setup, is the sound solution for F8x owners. Traditionally equal length exhaust configuration lowers the aggressive nature of the S55 engine. With this new design we have spent countless hours testing to ensure the raw aggressive sound is present through all rev ranges to give that emotion, but the equal length configuration allows for the sound to be very pleasurable rather than just loud. Owners coming from other non-equal length setups will not feel short-changed in regards to this setup's volume.

Fitment

• 2015 - 2018 BMW M3 F80
• 2015 - 2020 BMW M4 F82
• 2015 - 2020 BMW M4 F83

Features of this Valved Exhaust

• Constructed from T304 Stainless Steel or titanium
• Electronic exhaust valves for OEM integration
• Standalone valve controller available as an add on
• 21.7 lbs Lighter than the factory exhaust (stainless)
• 49.2 lbs Lighter than the factory exhaust (titanium)
• Fully Mandrel bend for maximum flow
• Precision tig welds for high strength
• 100% REVERSIBLE, always able to go back to stock at any time

*NOTE for all S55 OWNERS*
Due to this system being unresonated, the “2k rasp” certainly can be present on a race, free flow downpipe setup when shifting at very low rpm’s. While OEM downpipes aren’t very restrictive below 700hp on factory turbos, in our experience 200 cell or similar high flow cat will provide the most refined sound experience while adding volume over stock downpipes if you’re looking for an additional upgrade in flow and or sound.