Sachs Clutch Kit 26 Tooth for Citroen DS and Peugeot 1.6 THP Models 3000 970 129

SKU: 3000 970 129
Brand: Sachs
Part type: Clutch kit

Key Specifications

• Number of teeth: 26
• Supply form: only available in set
• Supplementary article information: without clutch release bearing
• Service note: observe service information supplied by the vehicle manufacturer and clutch manufacturer

This clutch kit is supplied as a complete set and does not include a release bearing. A suitable release bearing must be sourced and installed separately where required. Always refer to technical data and service bulletins when working on modern EP6 series engines.

Vehicle Compatibility

The applications below are taken directly from your catalogue lines. Catalogue codes and intermediate numeric values are ignored. Only model, engine code and year range are used.

Citroën

• Citroën C5 III 1.6 THP with engine EP6CDT, from 2009
• Citroën DS3 1.6 THP with engine EP6DT, year range 2010 to 2015
• Citroën DS4 1.6 THP 200 with engine EP6DTX, year range 2011 to 2015
• Citroën DS5 1.6 THP 200 with engine EP6CDTX, year range 2011 to 2015

Peugeot

• Peugeot 208 1.6 GTi with engine EP6CDTX, from 2012
• Peugeot 308 1.6 GTi with engine EP6CDTX, from 2010
• Peugeot 308 II 1.6 GT with engine EP6FDTX, from 2015
• Peugeot 3008 1.6 THP with engine EP6DT, from 2010
• Peugeot 508 1.6 THP with engine EP6CDT, from 2010
• Peugeot 5008 1.6 THP with engine EP6CDT, from 2011
• Peugeot RCZ 1.6 with engine 5FV EP6CDT, year range 2010 to 2015
• Peugeot RCZ 1.6 THP with engine EP6CDTX, from 2010
• Peugeot 308 CC with engine EP6CDT, year range 2009 to 2015

Always verify the engine code such as EP6CDT, EP6DT, EP6DTX, EP6CDTX, EP6FDTX or 5FV EP6CDT and confirm the vehicle year range before fitting this clutch kit. Where possible, compare the removed clutch components to the new parts to confirm spline count, diameter and mounting configuration.

OE Reference Numbers

The following original equipment numbers are supplied as interchangeable references for this kit. Use them to cross check against dealer information, old parts and electronic catalogues.

Citroën

• Interchangeable - 16 093 481 80
• Interchangeable - 2051 S2
• Interchangeable - 2052 Q2
• Interchangeable - 2053 08
• Interchangeable - 96 716 755 80
• Interchangeable - 96 750 206 80
• Interchangeable - 96 750 260 80
• Interchangeable - 96 774 289 80
• Interchangeable - 98 057 049 80
• Interchangeable - 98 136 721 80

DS

• Interchangeable - 16 093 481 80
• Interchangeable - 2051 S2
• Interchangeable - 2053 08
• Interchangeable - 98 057 049 80
• Interchangeable - 98 136 721 80

Peugeot

• Interchangeable - 16 093 481 80
• Interchangeable - 2051 S2
• Interchangeable - 2052 Q2
• Interchangeable - 2053 08
• Interchangeable - 96 716 755 80
• Interchangeable - 96 750 206 80
• Interchangeable - 96 750 260 80
• Interchangeable - 96 774 289 80
• Interchangeable - 98 057 049 80
• Interchangeable - 98 136 721 80

Product Overview

This Sachs clutch kit is intended for a wide range of Citroën and Peugeot 1.6 THP based models using EP6 engine variants. It is designed to restore smooth engagement and consistent drive when fitted together with a correctly matched release system and flywheel. The 26 tooth spline is a critical identifier and must match the input shaft of the gearbox being serviced. Supplying the kit as a set helps maintain component compatibility inside the clutch assembly.

The part is aimed at professional workshops that handle French and PSA based vehicles in the South African market, where clear OE cross references and model data are essential to avoid comebacks and downtime.

Fitment Guidance

• Confirm vehicle model, engine code and year range from the list above before opening packaging.
• Verify spline count and plate diameter by visually comparing the old and new parts.
• Inspect the flywheel for heat spots, cracks or excessive wear and replace or machine it where specified by the manufacturer.
• Check that the release system is in good condition and replace the release bearing and related components as required.
• Follow alignment and bolt torque procedures from the vehicle repair information to ensure correct seating of the pressure plate.

Installation and Maintenance Tips

• Use a suitable clutch alignment tool to centre the driven plate during installation.
• Do not contaminate the friction surfaces with grease or oil while handling the clutch components.
• Inspect gearbox input shaft splines for wear or corrosion and clean them before fitting the new clutch plate.
• Support the gearbox properly during removal and refit to avoid damage to engine mounts and alignment dowels.
• After installation, check pedal operation and free play according to manufacturer guidelines.
• Advise the vehicle owner to avoid harsh launches and heavy slipping of the clutch during the initial run in period.

Delivery Information

This Sachs clutch kit is supplied for the South African market with nationwide delivery to major centres such as Johannesburg, Pretoria, Durban and Cape Town, as well as surrounding regions. It is suitable for workshops and parts distributors that require catalogue correct clutch components backed by OE cross reference information.