Bolt Down Post Shoe Oxide Red 150mm x 150mm

Bolt Down Post Shoe Oxide Red 150mm x 150mmThe bolt down post shoe oxide red 150mm x 150mm is a galvanised steel post base designed to anchor 150mm x 150mm timber posts firmly to concrete or masonry surfaces. Suitable for outdoor structural use, it provides a rigid, fixed connection without the need for post in ground installation. Specifications Property Detail Material Galvanised steel Finish Oxide red Nominal Size 150mm x 150mm Use Class Exterior structural outdoor use What it's used for

The bolt down post shoe oxide red 150mm x 150mm is a galvanised steel post base designed to anchor 150mm x 150mm timber posts firmly to concrete or masonry surfaces. Suitable for outdoor structural use, it provides a rigid, fixed connection without the need for post-in-ground installation.

Specifications

What it's used for

• Anchoring fence posts to concrete footings or existing hard standings
• Fixing pergola uprights and garden structure posts to patio slabs or masonry bases
• Supporting structural timber columns in decking frames and raised platforms
• Replacing deteriorated in-ground post bases where the post itself remains sound

Fitting and handling

Mark and drill your fixing points into concrete or masonry, then secure the post shoe base plate using suitable anchor bolts or chemical fixings rated for outdoor structural loads. Drop the post into the socket and tighten the fixing bolts evenly to ensure the post sits plumb before any load is applied. Store post shoes in dry conditions prior to installation to prevent surface contamination that could affect bolt torque.

FAQ

Will this post shoe fit a standard 6x6 inch timber post?

A 150mm x 150mm post shoe is the metric equivalent of a 6x6 inch nominal size, so it is compatible with most 150mm x 150mm sawn or regularised timber posts. Always check your post's actual finished size before ordering, as some treated posts are slightly under-sized.

What fixings do I need to bolt this post shoe to concrete?

You will need expanding anchor bolts or resin anchors suitable for the concrete grade on site. M10 or M12 anchor bolts are typical for this size of post shoe. Always follow the anchor manufacturer's load tables and observe minimum edge distances from the slab edge.

Is the oxide red finish suitable for permanent outdoor use?

Yes. The underlying galvanised steel provides the primary corrosion protection, and the oxide red finish adds a further barrier. For coastal or highly exposed sites, inspect fixings annually and apply a suitable rust-inhibiting paint if the finish shows any signs of breakdown.

Browse our full range of fence posts to find the right timber to pair with this post shoe. Nottage Timber Merchants offers next-day delivery across the Bridgend area and throughout South Wales - order before midday for fastest dispatch.