Phaetus PMK8 Tungsten Carbide MK8 1.75mm Nozzle

Phaetus PMK8 Tungsten Carbide MK8 1.75mm NozzleAre you looking to buy a Phaetus Tungsten Carbide Mk8 Nozzle in Australia? There are a variety of 3D printing filaments on the market. Some of them require high temperature resistance of the nozzle, some require wear resistance, or both. In order to present better printing effect, we often need to change the nozzle according to the different printing filaments. It caused a lot of trouble for users of 3D printing equipment. Based on this pain point,

Are you looking to buy a Phaetus Tungsten Carbide Mk8 Nozzle in Australia?

There are a variety of 3D printing filaments on the market. Some of them require high temperature resistance of the nozzle, some require wear resistance, or both. In order to present better printing effect, we often need to change the nozzle according to the different printing filaments. It caused a lot of trouble for users of 3D printing equipment.Based on this pain point, Phaetus researched and developed the Tungsten Carbide Nozzle which is called "All Filaments, One Nozzle" 

Super Wear-Resistance | Using the world's leading ultra-high hardness tungsten carbide (hardness > 2700Hv (up to 2900Hv)), super wear resistance ensures long-term printing without wearness of nozzle hole and tip flat.

High Temperature Performance | Composed of tungsten carbide and copper alloy with super hardness and excellent conductivity, maximum printing temperature can be 550℃.

Low Pushing Force | Tungsten Carbide Nozzle with high purity more than 99.98% and high thermal performance keeps an even temperature of nozzle tip during printing, thus guaranteeing a stable extrusion.

Faster Speed | Due to the high thermal performance of the nozzle in general, the printing speed can be pushed even further without sacrificing the quality. Unique passageway in the nozzle improves the flow rate at the inner hole faster.

Low Friction | The whole nozzle is applied with DLC coating after adding a hard and smooth nickel plating layer. Surface friction coefficient is as low as 0.05 which makes the nozzle with clean printing, without plastic sticking to it.

DLC coating

Friction coefficient is only 0.05, effectively avoiding molten plastic sticking to the nozzle;
Coating thickness 2.0μm, without effects on any dimension accuracy;
Maintaining good lubrication and wear-resistance up to 300℃;
Strong adsorption capacity, coating hardness HV2200;
Stable chemical properties, non-toxic, non-corrosive and insoluble in other solvents.

Browse more

• Browse all Nozzles
• Browse all Phaetus
• Browse all 3D Printer Parts and Accessories