Light Hardwood Dowel Rod 28mm x 28mm x 2400mm

Light Hardwood Dowel Rod 28mm x 28mm x 2400mmThis 28mm light hardwood dowel rod offers a smooth, machine turned round profile ideal for dowel jointing, furniture making, and general woodworking. Supplied at 2400mm long, the 28mm x 28mm section is a practical choice for a wide variety of trade and DIY applications. Specifications Property Detail Material Light hardwood Nominal Size 28mm x 28mm Length 2400mm Profile Round dowel rod Finish Smooth machine turned What it's used for Dowel joints in

This 28mm light hardwood dowel rod offers a smooth, machine-turned round profile ideal for dowel jointing, furniture making, and general woodworking. Supplied at 2400mm long, the 28mm x 28mm section is a practical choice for a wide variety of trade and DIY applications.

Specifications

What it's used for

• Dowel joints in cabinet making and furniture construction
• Curtain poles and hanging rails in domestic interiors
• Shelf support pegs and tool handle replacements
• Craft, hobby, and general DIY round-section projects

Fitting and handling

Store the rod horizontally on a flat surface in a dry indoor environment before use, allowing it to acclimatise to the room's temperature and humidity for at least 24 hours to reduce any risk of warping. The rod can be cut to length with a standard hand saw or mitre saw and sanded lightly with 120-grit paper before finishing with varnish, oil, or paint. For structural dowel joints, drill a matching 28mm hole and use a suitable wood adhesive to secure the joint.

FAQ

What is the actual finished size of this dowel rod?

The dowel is nominally sized at 28mm in diameter. As it is machine-turned, the finished diameter is consistent along the full 2400mm length, making it straightforward to match with a 28mm flat-bottomed or spade bit when drilling receiving holes.

Can I cut this dowel rod to a shorter length?

Yes. The 2400mm rod can be cut to any length using a standard hand saw, mitre saw, or even a sharp tenon saw. Mark the cut point clearly with a pencil and use a mitre box for a square, clean end.

What finish can I apply to a light hardwood dowel?

Light hardwood takes most wood finishes well. A light sand with 120 to 180-grit paper is recommended before applying varnish, Danish oil, wax, or paint. If the dowel will be used outside, use an exterior-grade finish or preservative oil to protect it from moisture.

For related interior mouldings and timber sections, browse the oak mouldings collection at Nottage Timber Merchants. We supply trade and retail customers across Bridgend and South Wales, with next-day delivery available to many local postcodes.