Heavy Duty Drive Belt for Bennche, HiSun, Kymco, Yamaha - Gates / Napa G-Force 29G3596

Heavy Duty Drive Belt for Bennche, HiSun, Kymco, Yamaha - Gates / Napa G-Force 29G3596Gates CVT Drive Belt for Bennche, Kymco and Yamaha This CVT drive belt fits Bennche, Kymco and Yamaha UTVs and Side by Sides. Belt description: CVT ( Continuous Variable Transmission ) Napa G Force 29G3596 Standard Version of 29C3596 Bennche, Kymco and Yamaha UTVs and Side by Sides Replaces Bennche BHXTX2241 Replaces Carlisle UA422, UA461 Replaces Dayco HP2033, HPX2233, XTX2233, XTX2241, XTX2271 Replaces Napa Gates 29G3596, 29C3596 Replaces Kymco

Gates CVT Drive Belt for Bennche, Kymco and Yamaha

This CVT drive belt fits Bennche, Kymco and Yamaha UTVs and Side-by-Sides. 

Belt description:

• CVT (-Continuous Variable Transmission-)
• Napa G-Force - 29G3596 -  Standard Version of 29C3596
• Bennche, Kymco and Yamaha UTVs and Side by Sides
• Replaces Bennche BHXTX2241
• Replaces Carlisle UA422, UA461
• Replaces Dayco HP2033, HPX2233, XTX2233, XTX2241, XTX2271
• Replaces Napa / Gates 29G3596, 29C3596
• Replaces Kymco 23100LKM5E00
• Replaces Prime Line 724003
• Replaces Yamaha 28P176410000, 3B4176410000, 5KM176410000, 5KM176410100, B16E76410000
• Replaces 911.531.528
• Length: 943mm (37.125 in)
  
• Width: 33mm (1.281 in)
  
• High Performance Neoprene with Carbon Tensile Cords for Optimal Power Transmission and Increased Side Load Resistance

Fits the following Bennche models:

• 2016             Bighorn 500
• 2016             Bighorn 700
• 2016             Bighorn 700X Crew
• 2016             Cowboy 500
• 2016             Cowboy 700
• 2016             Gray Wolf 500
• 2016             Gray Wolf 700

Fits the following HiSun models: Includes Big Muddy, Coleman, Cub Cadet, Massimo, Menards Yardsport, Rural King, TSC and Q Link.

• 2008 - 2017  All 500cc, 550cc 700cc and 750cc 

Fits the following Kymco models:

• 2014              UXV 700i HE
• 2014 - 2015   UVX 700i LE
• 2014              UVX 700i SP
• 2014 - 2015   UVX 700i Turf

Fits the following Yamaha models:

• 2005              Grizzly 550 Automatic
• 2009 - 2014   Grizzly 550 FI Auto 4x4
• 2009 - 2014   Grizzly 550 FI Auto 4x4 EPS
• 2002 - 2003   Grizzly 660
• 2004 - 2008   Grizzly 660 Automatic
• 2016              Grizzly 700
• 2015              Grizzly 700 4x4
• 2015              Grizzly 700 4x4 EPS
• 2015              Grizzly 700 4x4 EPS SE
• 2007 - 2009   Grizzly 700 Automatic
• 2016 - 2018   Grizzly 700 EPS
• 2016 - 2017   Grizzly 700 EPS LE
• 2016 - 2017   Grizzly 700 EPS SE
• 2010 - 2014   Grizzly 700 FI Auto 4x4
• 2008 - 2014   Grizzly 700 FI Auto 4x4 EPS
• 2009 - 2014   Grizzly 700 FI Auto 4x4 EPS SE
• 2016 - 2018   Kodiak 700
• 2016 - 2017   Kodiak 700 EPS
• 2004 - 2008   Rhino 660 Automatic

The fastest way to ruin your new powersport drive belt is to simply install it. If you don’t break the belt in properly, you’ll find yourself shredding the belt instead of the terrain. In fact, most powersport belt failures can be attributed to improper break-in and clutch adjustment – or not breaking in the belt at all.

Ensure the best performance and longest life from your G-Force belt. Follow these three steps when installing a new belt.

1. Install the Right Belt. Using a belt that’s even slightly different than the OE specs can affect performance – or stop you in your tracks.

2. Align and Clean. Align the clutches according to manufacturer’s specifications and clean the sheaves with a Scotch-Brite® pad. Remove old belt residue, glazing, oils and debris with alcohol or acetone on the clutch sheave area. DO NOT USE BRAKE CLEANER.

3. Install and Break It In. Perform two heat cycles in 20 miles. Conservatively run through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.