kennametal blve p long venturi nozzle

kennametal blve p long venturi nozzleThe BLVE P Series is a boron carbide long venturi nozzle combining a polyurethane jacket with a brass thread connection. The boron carbide liner typically outlasts tungsten carbide by five to ten times when used with aggressive abrasives such as aluminium oxide and selected mineral aggregates. The long venturi bore delivers up to 40% greater production rates than straight bore nozzles. Designed for use with a 25mm (1") internal diameter blast hose,

The BLVE-P Series is a boron carbide long venturi nozzle combining a polyurethane jacket with a brass thread connection. The boron carbide liner typically outlasts tungsten carbide by five to ten times when used with aggressive abrasives such as aluminium oxide and selected mineral aggregates. The long venturi bore delivers up to 40% greater production rates than straight bore nozzles.

Designed for use with a 25mm (1") internal diameter blast hose, these nozzles are suited for high-duty surface preparation where aggressive abrasives are the primary media and long intervals between nozzle changes are a production requirement.

The brass thread provides a corrosion-resistant metal connection, positioning the BLVE-P between the all-aluminium BLVE and the polyurethane-threaded BLVE-AP. Despite a higher purchase price than tungsten carbide equivalents, the extended service life of boron carbide typically results in a lower cost per blasting hour in aggressive abrasive applications.

Boron carbide is more brittle than tungsten carbide: careful handling is required, and rough handling on active job sites should be avoided.

Key Features

• Polyurethane jacket with brass thread connection — balance of weight savings and thread durability
• Long venturi bore
• Boron carbide liner
  
• Recommended for use with aggressive abrasives such as aluminium oxide and selected mineral abrasives
  
• Thread: 1-1/4" NPSM (brass) Note: Most blasting systems worldwide use 50 mm thread nozzles. Verify compatibility or select a matching nozzle holder/adapter for this thread type.

Available Sizes & Lengths
Available in nozzle sizes #4, #5, #6, #7 and #8, with lengths ranging from 133.4 mm to 219 mm.