Huepar 902CG Laser Level

Huepar 902CG Laser Level360 DEGREE VERTICAL and 360 DEGREE HORIZONTAL LINE With its ultra bright 360 degree vertical and 360 degree horizontal green beams the 902CG Laser Level provides all around leveling coverage with accuracy of 1 9 Inch at 33 Feet and a maximum working range of 130 feet, enabling you to work in different parts of a large room simultaneously. GREEN LASER UNIT This self leveling cross line laser level adopt the latest LD blue green laser unit, it is at

• 360-DEGREE VERTICAL and 360-DEGREE HORIZONTAL LINE- With its ultra bright 360-degree vertical and 360-degree horizontal green beams the 902CG Laser Level provides all-around leveling coverage with accuracy of ±1/9 Inch at 33 Feet and a maximum working range of 130 feet, enabling you to work in different parts of a large room simultaneously. 

• GREEN LASER UNIT- This self-leveling cross line laser level adopt the latest LD blue-green laser unit, it is at least twice brighter than red lasers utilizing the same power source. The bright 360° laser lines allows the user to project a laser reference line around the room with accuracy to quickly establish level, enabling users to work in different parts of a room simultaneously.

• MULTIFUNCTIONAL MODE- One button operation makes it easy to project lines together or independently (cross line, vertical and 360-degree horizontal). With our smart pendulum system, the pendulum locks when the level is switched off. Simply, hold the top button 2 seconds to start manual mode, letting you project lines in any position or angle.

• OUTDOOR PULSE MODE & DURABLE- When the pulse mode is turned on, laser tool can be used with a laser detector for working in even brighter environments or at greater working distances. This laser level is covered by TPR soft rubber for shock resistant, IP54 waterproof and dustproof, shockproof, wear resistant, impact resistance, cold and high temperature.

902CG Laser Level Specifications:

• Laser Class: Class 2 (IEC/EN60825-1/2014), output power <1mW

• Laser Wavelength: 510±5 nm

• Leveling Accuracy: ± 1/9 Inch at 33 Feet

• Horizontal/Vertical Accuracy: ± 1/9 Inch at 33 Feet

• Leveling/Compensation Range: 4°±1°

• Working Distance (Line): 130ft (100 LUX)

• Working Distance with Huepar Receiver: 165Ft

• Operating Time: 4 hours with all laser beams on

• Power Source: 4×˝AA˝ (LR6), it is recommended to use a large capacity (rechargeable) battery.

• IP Rating: IP54, waterproof, dustproof and shockproof, reliable and tough

• Operation Temperature Range: 14℉- 122℉(-10℃-＋50℃)

Items in the Package:

• 1 X Huepar  902CG laser level( No including battery )

• 1 X Magnetic pivoting base

• 1 X Green laser target card

• 1 X Cloth case

• 1 X English User's Manual

➤Three kinds of circuit switching functions:

Each time the power button is pressed once, the laser tool projects horizontal lines, vertical lines, and cross lines in sequence. 360° cover horizontal line and 360° vertical line (H360°/V360°)

Self-leveling mode & Manual mode

Self-leveling mode:

When the laser tool is switched to the unlocked position, self-leveling mode is enabled. The laser beam will blink continuously at 2Hz when the tool is beyond self-leveling range (4°±1°).

Manual mode:

When the pendulum lock is in locked position, you can place the laser tool at various angles to project non-level straight lines. The laser beam will blink every 3-5 seconds to remind you that it's not self-leveling now.

➤ Pulse Mode：

●Unlock the pendulum, press and hold the power button (for about 5 seconds) to turn on the pulse mode, then turn it on red.

●When outdoor work is required (the receiver needs to be purchased separately,  the laser receiver LR510 can receive pulses.

●The receiver frequency is 10khz and the Huepar brand is the best pairing.

Various kinds of fixing method:

●Strong Magnetic L mount with triop thread can attaches the laser to any steels easily, turning around 180-degree as you like.

●It can also accepts a standard tripod screw to do height adjustment.

 

How to switch the line: After power on, short press the power switch once a time, the laser tool will project horizontal line, vertical line and cross line in turn. How to turn the pulse mode ON:After power on, long press the the power key, when the blue light is on, the pulse mode is on.

Technical Details