Huepar S03CG-L Laser Level

Huepar S03CG-L Laser LevelFULLY LAYOUT WITH 3 X 360 LINE LASERS: One 360 horizontal and two 360 vertical planes enable users to cover the floor, wall, ceiling all around the room, provides an all in one level and alignment solution for one person job setup. Three laser lines cross at 90angles makes user quickly visualize and finish square layout. The laser tool quickly arranges and squares room layout with three 360 laser lines. TRIPLE POWER TECHNOLOGY: Huepar laser tool

With advanced laser level technology, Huepar is committed itself to providing solutions for a wide variety of applications of greater accuracy and precision. Shop Huepar cross line laser level, complete your projects more efficiently and with greater ease.

Specifications for Huepar 3 x 360 Green Laser Level S03CG-L:

• Projection: 3 x 360° Green Laser Lines
  
• Laser Class: Class 2 (IEC/EN60825-1/2014), <1mW power output
  
• Laser Wavelength: 505-520nm
  
• Horizontal / Vertical Accuracy: ±1/9 Inch at 33 Feet
  
• Leveling / Compensation Range: ±3.5°
  
• Working Distance: 85 feet (300 LUX), 200 feet with Huepar Laser Detector LR-5RG / LR-6RG
  
• Power Source: 7.4V / 2600mAh Li-ion Battery & 4*AA (LR6)
  
• Operating Time with Lithium Battery: 7 hours with all laser beams on
  
• Operating Time with AA Batteries: 1.5 hours with all laser beams on
  
• Mount Size: 1/4"-20 & 5/8"-10
  
• IP Rating: IP54 dust-proof, waterproof and shockproof, reliable and tough
  
• Operation Temperature Range: Between -10℃ and +50℃
  
• Storage Temperature Range: Between -20℃ and +70℃

WARNING: Do not point the laser beam directly into the eyes. The device is a laser class 2 laser product according to IEC / EN60825-1 / 2014. It is allowed to use the device without any further safety precautions. The eye protection is usually secured by aversion reactions and blink reflex.

Almost Unlimited Field of Application:

• One 360° horizontal and two 360° vertical planes enable users to cover the floor, wall, ceiling all around the room.
  
• You can use the intersection of the laser lines to project reference points and divide surfaces at right angles.
  
• Short press H/V button to switch the laser line combinations individually.
  
• The three laser lines can be selected individually depends on job site applications.
  
• complete tool to cover the floor, wall, ceiling all around the room.

Self-leveling mode&Manual mode

Self-leveling mode:

Once the pendulum unlocked, the self-leveling mode is enabled. The laser beam will beep as well as the laser beam blink fast when the tool is out of self-leveling range ±3.5°.

Manual mode:

When the pendulum is in the locked position, the laser tool can be placed for use at any angle.

The laser beam will blink every 3-5 seconds to remind you it's not self-leveling now.

In manual mode, when all laser lines are switched off, the laser tool will shut OFF automatically after about 5 minutes of inactivity.

Outdoor Pulse Mode

• Turn ON the pulse mode: After power ON, short press Pulse Mode button to switch ON/OFF the pulse mode.
• Pulse mode extends the working range up to 200 feet in brighter working conditions when using with Huepar Line Laser Detector
• When the pulse mode is activated, the laser beams are dimmer, the pressure on eyes is less when working at close range, and the working time can be appropriately extended
• It is compatible with Huepar LR-5RG / LR-6RG Line Laser Receiver (need to purchase separately) only.
• Keep the pulse mode on when using with a receiver.

Triple Power Supply

• This laser tool utilizes the included 7.4V / 2600mAh Li-ion battery which is compatible with Samsung SB-L110 battery.
• This laser tool comes with an holder for installing AA battery to use the tool.
• Direct input charging: This laser tool can be used at job site with direct input charging even if take out the battery.
• Charging protection help prevent the tool from overcharge.

More Installation Methods

• 360° Magnetic Pivoting Base: Allows being adsorbed onto metal track and steel. The base provides 360° free rotation to meet different angles required.
• 1/4"-20 and 5/8"-11 mounting threads on the bottom of the bracket for temporary fastening in place or being fixed on tripod or laser mounting pole.

Bright Green Laser Diode:

• This cross line laser adopts the bright Osram’s green laser unit, which is resistant to temperature changes and has higher stability.
• At the same power, the green laser is twice bright as the red laser, with a working range up to 85 feet (300LUX) of accuracy within ±1/9 Inch at 33 Feet.

Durable Design & Easy to Use:

• Over-molded laser window: Withstands hazardous job site conditions and can be removed and replaced with a screwdriver.
• Convenient design battery cover: Open the battery cover with just one tap.
• IP54 water/dust resistance ensures you work well in hazardous working conditions.
• Green Target Plate: Increases the visibility of the laser beam.

Widely Used:

• Huepar 3x360° three-plane leveling and alignment-line laser provides an all-in-one level and alignment solution for one-person job setup, enable users to cover the floor, wall, ceiling all around the room.
• Laser tools can help you work effectively in home decoration, wall building, bridge construction, engineering construction, railway construction, etc.

Package Contents

• 1 x 3D Green Tiling Laser Level S03CG-L
• 1 x Rechargeable Li-ion Battery
• 1 x Power Adapter& Type-C cord
• 4 x AA (LR6) Batteries & 1 x AA Battery Holder
• 1 x Magnetic Bracket
• 1 x Lifting Base
• 1 x Steel Sheet
• 1 x Laser Target Plate
• 1 x Lase Level User Manual
• 1 x Portable Bag