Victron Blue Smart IP22 Charger 12/30 230V CEE 7/7

Victron Blue Smart IP22 Charger 12/30 230V CEE 7/7DC Voltage: 12 V Weight: 1. 3kg Length: 65mm Width: 108mm Height: 235mm Input Voltage: 230 V Frequency: 45 65 Hz Operating Temperature Range: 30 to +50C (full rated output up to 30C) Number of outputs: 1 Warranty: 5 Years The battery is charged smartly to perfect condition The seven step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs maintains its health ensures better performance and a longer

• DC Voltage: 12 V
• Weight: 1.3kg
• Length: 65mm
• Width: 108mm
• Height: 235mm
• Input Voltage: 230 V
• Frequency: 45- 65 Hz
• Operating Temperature Range: -30 to +50°C (full rated output up to 30°C)
• Number of outputs: 1
• Warranty: 5 Years

The battery is charged smartly… to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs maintains its health ensures better performance… and a longer life.

Recovery of deeply-discharged dead' batteries
Unlike other brands the Blue Smart IP22 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.

Check the status of your battery remotely
The Blue Smart IP22 is equipped with built-in Bluetooth so the status of the charger and the battery can be checked on a smartphone tablet or laptop. All settings of the charger can be configured with the VictronConnect app.

Bluetooth Smart
The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current to change settings and to update the charger when new features become available.

High efficiency
With up to 94% efficiency these chargers generate up to four times less heat when compared to the industry standard.
And once the battery is fully charged power consumption reduces to 0 5 Watt some five to ten times better than the industry standard.

Adaptive 6-stage charge algorithm: test- bulk- absorption- recondition- float- storage
The Blue Smart Charger features a microprocessor controlled adaptive' battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.

Storage Mode: less maintenance and aging when the battery is not in use
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2 2V/cell (13 2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to equalize' the battery. This feature prevents stratification of the electrolyte and sulfation a major cause of early battery failure.

Also charges Li-ion (LiFePO₄) batteries
LiFePO₄ batteries are charged with a simple bulk- absorption- float algorithm.

NIGHT and LOW setting
When in NIGHT or LOW mode the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.

Protected against overheating
Output current will reduce as temperature increases up to 50°C but the Blue Smart Charger will not fail.

Eleven LEDs for status indication
Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY.
MODE button to set: NORMAL (14 4V) / HIGH (14 7V) / RECONDITION / LI-ION.