SKU: 35458386279

Inakustik Referenz LS-1205 Speaker Cable (pair)

Sale price$2340.00 Regular price$2600.00
Save 10%

Pay in installments of $650.00 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Sep 2 - Sep 7

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Inakustik Referenz LS-1205 Speaker Cable (pair)LS 1205 AIR Because the speaker cable carries the largest current in the entire device chain, a suitable conductor cross section is required to transport it with as little loss as possible. This current generates correspondingly strong magnetic fields and, since it is alternating current, there is a frequency dependent resistance in the inductance of the cable. Low inductance is therefore particularly important for speaker cables and this is precisely

LS-1205 AIR

Because the speaker cable carries the largest current in the entire device chain, a suitable conductor cross-section is required to transport it with as little loss as possible. This current generates correspondingly strong magnetic fields and, since it is alternating current, there is a frequency-dependent resistance in the inductance of the cable.

Low inductance is therefore particularly important for speaker cables - and this is precisely what has been achieved with the LS-1205 Air: The cable's inductance value has been reduced by a particularly ingenious arrangement of the conductors, the 4-fold "multicore" structure, enabling it to behave in a completely sound-neutral way over a wide frequency range. In addition, the magnetic fields generated around the individual conductors overlap and neutralize each other. This means that all frequencies are transported unhindered and without any time delay, enabling a fabulously open and detailed musical presentation. At the end of the air helix, the LS-1205 Air’s four conductors are separated into so-called aluminum splitters for the receiving connector.

In the area between the splitters and plug, in-akustik uses highly flexible molded parts made of a special elastomer. These parts are fixed inside the splitter using a specifically designed plastic plug. This means that the cable remains reliably flexible in the connection area as well. The molded parts run right to the front of the connectors and enclose their inner workings - which underscores the sleek yet attractive design of the LS-1205 Air.

Thanks to the Air Helix design, the conductors run freely suspended through the length of the cable.

The Air Helix architecture permits signal conductors to be insulated to practically 100% by air. Special clips were developed to provide the supporting framework. Positioned at defined intervals inside the cables, these clips keep the helically-arranged conductors apart. Cable flexibility is assured by means of two struts that ensure the clips remain together but also at a precise distance from each other. This architecture is unique, bringing low capacitance and minimum dielectric losses – a true milestone in the search for open and unadulterated sound.

Our physical approach: Minimize losses for true-to-original playback.

Our Referenz AIR cables transport audio signals between source, amplifier and speaker in an authentic way and with a minimum of loss. You can enjoy music that precisely expresses the emotions of the artists at the time of recording – sensual, subtle, light-hearted or orchestral right through to full-blooded and rocking. Vocals and instruments are delivered in unadulterated form. Everything remains vibrant and full of emotive energy. Favorite tracks and pieces continue to trigger strong feelings even when you’ve heard them a hundred time over.

AIR Helix

The Air Helix architecture enables the signal conductors to run freely suspended through the length of the cable and permits signal conductors to be insulated to practically 100% by air.

The dielectric

Using air as a dielectric lowers capacitance to a minimum. In comparison with other insulators, using air as a dielectric leads to no increase in capacitance and creates no dielectric losses.

Multicore structure

By cleverly arranging the conductors in the multiply nested multicore structures, overlapping magnetic field areas are created that significantly reduce inductance.

Point-to-point Air Helix for end-to-end connections

A new feature in the 5th generation of in-akustik’s Air Helix architecture is the point-to-point connection. Specially designed transitions are available for each type of cable and connector. Across the complete length of the cable – point-to-point AIR Helix. It may sound trivial at first, but the results are impressive. Sound signals are transported with minimized losses, right through to the final centimeters. The sound is more detailed and dynamic than even before.

The conductor structure

The Cross Link Super Speed waveguide avoids skin effects caused by eddy currents in the conductor. Thanks to the braided structure, the waveguide is able to precisely transport even extreme current peaks. A lacquer coating around each wire prevents eddy currents within the conductor and protects against oxidation. All this results in a conductor that delivers a balanced sound consisting of vibrant and never overemphasized timbres, even in complex musical passages and at high volume levels.

The conductor material

The conductor material is a crucial factor for the transmission of sound signals. Any contamination worsens the conductance and increases the background noise. We only use pure, oxygen-free copper in our AIR cables. We ensure that only carefully selected batches of pure copper are processed. We take great pains to measure the quality of the copper before it is sent to the mill for drawing to the required cross-section over the course of a multi-stage process.

The multicore structure

Inductance is critical to the capacitance of a loudspeaker cable, By cleverly arranging the conductors in the multiply nested multicore structures, overlapping magnetic field areas are created that significantly reduce inductance. This allows the entire frequency spectrum, including high frequencies and dynamic impulse sequences, to be transported in an unimpeded way and with no delays. The music seems more exquisitely detailed, and the sound gains in fine dynamism. All details are kept distinct yet harmonious at the same time.

Cable manufacturing unit

The beating heart of in-akustik is our manufactory. This is where our success story is rooted – permeated by a congenial working atmosphere, a love of music and a passion for detail. At in-akustik, we believe musical enjoyment stems from a listening experience that remains as close as possible to the original recording and the artist’s interpretation of the piece. That’s why we boast a committed workforce that combines curiosity with a keen sense of precision. With a fascination for music and things that are really special – like the development of our complex AIR cables.

Handmade

Each cable is handcrafted with the utmost care. Our extensive know-how and the qualifications of our team enable us to manufacture the complex cables in a customized manner. Apart from the finest of materials, our most important resource is the manual dexterity of our cable assemblers. In assembling our outstanding cables, they demonstrate meticulousness, composure and dedication.

Rigorous quality control

We manufacture in accordance with the highest standards. Rigorous quality control is carried out before, during and subsequent to assembly. We verify the tolerances of ever individual component. At every stage of manufacturing, we check the configuration and electrics for short-circuits. We also conduct functional and mechanical testing. No product leaves our manufacturing unit without a final quality check.

Did you know...

......that our LS-1205 AIR (2 x 3 m; SW) is made up of 534 individual components? The copper wire used is 647 m long, and the PE monofilament is 667 m long. Containing 1584 drill holes, the Air Helix design of this cable type demands great dexterity on the part of the assemblers when they’re threading through the conductors.

AIR background

It is widely known that the “dielectric” (= non-conductive substance) of capacitors plays a major role in the sound of hi-fi devices and loudspeakers. The engineers therefore select all components very carefully. Even if they only contain a few cubic millimeters of dielectric: A meter-long cable usually already contains several hundred cubic centimeters of dielectric substance in the form of insulating material. This dielectric stores electrical charge, i.e. energy – which is entirely wanted and necessary in electronic components such as capacitors. With cables, however, the resulting capacitance is considered a "parasitic" effect and is not wanted for unadulterated music playback because it significantly influences the transmission properties and leads to interactions with the connected electronics.

Rhodium-coated

The best cable requires optimum connection technology. We use tellurium copper, a harder metal alloy that maintains the high conductivity value. Much superior to that of brass connectors. The rhodium coating ensures long-lasting contact and corrosion resistance. The stable conductivity is even maintained with frequent conversions. This is better than gold contacts, which wear out quicker.

Pressed contacts (1.5 tonnes)

The contact elements of the connectors are pressed directly into the conductor material using a special tool with a force of 1.5 tonnes. This creates a stable and reliable connection without the use of solder or ferrules. Transition resistances and negative effects are avoided to ensure optimum signal transmission.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 35458386279

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 18 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
A
Verified Purchase
Amazon Customer
Houston, US
★★★★★ 5
Runs big but great shoe!
Size: 12 Wide, Color: Black
Great looking shoe at a very good price! Runs big, I had to get the next size down for my son.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 17, 2026
B
Verified Purchase
Butch M.
Chelsea, US
★★★★★ 5
Fantastic Shoe for the Price
Size: 9.5 Wide, Color: Wingtip Black
Okay, I’m used to spending big bucks on men’s dress shoes. I’m talking $300 plus for American made shoes. They are recraftable (resole-able) for another $100 each time. But since Covid, I don’t go to the office as often. One of my black dress shoes needs to be re-soled, and it will be. Just not now. So I ran into these shoes on Amazon. It’s hard to argue with the price. Literally 10% of what I have been paying. So, are these shoes 90% lower in quality? The short, simple answer is, surprisingly, no. Just the opposite. Upon receipt, I inspected them carefully and they looked pretty darned decent. I was looking for any excuse to plop them back in the box and return them. I couldn’t find anything. I appreciate that the leather upper is smooth and mildly shiny. This is a wing tip style shoe, so I’m impressed that the extensive stitching was evenly spaced. The leather detailing that I expect on a wing tip is also all there. Inside the shoe, it is lined from the toes all the way to the heel box… nice! And that leather feels surprisingly supple. That is something I would expect on a much more expensive shoe. But definitely not at this price point. Hmm. I even liked the wax laces they chose. They are a little thicker and have more than adequate length. The shoe’s eyelets have interior facing metal grommets to protect against stretching and tear out of the leather and helps protect the laces against friction wear, as they are tightened and loosened over time. Now having that detail, at this price point, has raised both of my eyebrows. Double hmm. Now I am really impressed. The only thing that I didn’t like was that the stitching—that joins the uppers to the sole—is white. I needed to polish these shoes anyway, so I figured I’d see what would happen if I put black polish on the stitching. I’m happy to say that the uppers shine up very nicely, to a high gloss. This was done with just a little bit of buffing, using a traditional horse hair bristled brush. And followed by a buffing cloth. Although I didn’t do it, the leather is smooth enough that I probably could have spit shined them. And those pesky white stitches on the top side of the soles? Well I’m happy to report that they are now definitely black. Turning the shoe over, I can visually see a lump where the shank is supposed to be. That’s a good thing. Not all shoes have a shank. It helps to support the arch. That’s another nice detail. I am expecting the shank to be plastic at this price point. So I am utterly shocked to report to you that a magnet sticks to the bottom of the shoe. That shank is steel! Now I am amazed! We’re talking mind blown, Purple smoke everywhere. Speaking of details, I was very surprised to see the nicely done wing tip detailing, from on top of the shoe, carried over to the bottom of the sole. Wow. I have never seen that before. That’s surprising. Now it is important to point out that the sole is some man made material. Definitely not leather. But that’s okay. Especially in the wet, leather wears out quickly, if you don’t wear rubber over shoes. One less thing to fuss about. The heel itself has a band/layer of rust brown material sandwiched between black layers. I wonder if that is a cork or bamboo material? Having walked in these shoes, on concrete and tile floors, last week, there is a noticeable level of cush, or give. They will definitely not to be confused with sneakers. But for dress shoes, this is a pleasant and surprising experience. The first day, I wore them at home, over the weekend and I’m glad I did that. They needed time to adjust to my feet. Any dress shoe that I have ever worn needs that. But after that, these shoes have been pleasant enough to walk around in at work. I’d have to say that these shoes give me at least 90% of what I would expect from my $300+ shoes for around 10% of the cost. In my estimation, at their current price point, they constitute an excellent deal. And especially if you are just breaking into the business world and need a good pair of interview shoes, these are definitely respectable… just be sure to put black polish on the white stitches. Oh, BTW, I have wider feet and I ordered the shoe wide. After the initial stretching, they fit nicely. So, in the final analysis, what do I think? I have to say, yes, these shoes definitely get my recommendation. Especially if price is a huge factor, then these shoes constitute an excellent deal.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 20, 2023
N
Verified Purchase
Nikki
Draper, US
★★★★★ 5
Great dress shoe
Size: 10.5 Wide, Color: Black
Wow. Very impressed with these. Would purchase again. Comfortable enough for my teenage son, my husband and I very impressed with their look. Great for any special occasion. Ours appear to be all leather. Even the sole. These will last a lifetime if cared for.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
K
Verified Purchase
Kim S
Carnegie, US
★★★★★ 5
Great buy!!!
Size: 11, Color: Dark Brown
Very happy with shoes, color was good. Size was perfect. Comfort was great!!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 21, 2026
R
Verified Purchase
Richard
Draper, US
★★★★★ 3
Ok. Not great
Size: 8.5 Wide, Color: Brown
They look great but not that comfortable
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 6, 2026

recommand products